Buccal tablets containing cysteine and chlorhexidine for the reduction of acetaldehyde levels in the oral cavity

There is growing evidence that a large proportion of upper digestive tract tumors are ascribable to heavy alcohol drinking and tobacco consumption. The cancer-promoting action of ethanol is mediated by acetaldehyde, its first metabolite, also derived from the bacterial oxidation of alcohol by the oral microflora, classified by the International Agency for the Research on Cancer as a carcinogen. Acetaldehyde is also one of the major components of tobacco smoke. These findings suggest two different strategies to decrease the risk of alcohol-related oral cancers: the reduction of the levels of alcohol-derived acetaldehyde in saliva and the reduction of oral bacterial flora. Therefore, the aim of our study was to develop and characterize some buccal tablet formulations containing both 20 mg L-cysteine hydrochloride (able to chemically neutralize acetaldehyde) and 10 mg chlorhexidine diacetate (well-known antiseptic compound active against a large spectrum of oral microbes). One of these formulations, chosen on the basis of its favourable delivery kinetics of the active principles, was demonstrated to be able to reduce acetaldehyde concentration in an in vitro system and to lower its salivary levels in volunteers after ethanol contact. Our findings support the hypothesis that the application of buccal devices containing cysteine and chlorhexidine could reduce salivary acetaldehyde levels and thus the incidence of upper gastrointestinal cancer in drinkers and smokers.     

The Potentiality of Plant-Derived Nanovesicles in Human Health—A Comparison with Human Exosomes and Artificial Nanoparticles

Research in science and medicine is witnessing a massive increases in literature concerning extracellular vesicles (EVs). From a morphological point of view, EVs include extracellular vesicles of a micro and nano sizes. However, this simplistic classification does not consider both the source of EVs, including the cells and the species from which Evs are obtained, and the microenvironmental condition during EV production. These two factors are of crucial importance for the potential use of Evs as therapeutic agents. In fact, the choice of the most suitable Evs for drug delivery remains an open debate, inasmuch as the use of Evs of human origin may have at least two major problems: (i) autologous Evs from a patient may deliver dangerous molecules; and (ii) the production of EVs is also limited to cell factory conditions for large-scale industrial use. Recent literature, while limited to only a few papers, when compared to the papers on the use of human EVs, suggests that plant-derived nanovesicles (PDNV) may represent a valuable tool for extensive use in health care.     

Synthesis and Conformational Analysis of Cyclotetrapeptide Mimetic β‐Turn Templates and Validation as 3D Scaffolds

The conformations of all stereoisomers of PMRI cyclotetrapeptide mimetics 1 – 8 are essentially determined by the predisposition of the diamine to stabilize β‐turns. The peptide mimetics can be regarded as 3D scaffolds for designing molecules with a predictable display of the pharmacophores. We used the models for testing novel RGD analogues as α_vβ₃‐integrin receptor antagonists.

     

Manufacturing of multi-functional micro parts by two-component metal injection moulding

Several metals and alloys can be used to enhance the mechanical and physical properties of micro parts and components for micromechanical, micro-chemical or sensor applications. Such parts can be produced in series by the powder metallurgical process of micro metal injection moulding (μ-MIM). This paper describes a novel manufacturing route for metallic multi-material micro components, two-component micro metal injection moulding (2C-μ-MIM). Similar to “two-colour” injection moulding of plastics, the process allows the integration of multiple functions in a micro part by simultaneously injecting and joining two materials in one mould. Net-shape parts with solid material interfaces are obtained. In this paper, the 2C-μ-MIM process is exemplified for the combination of a non-magnetic and a ferromagnetic stainless steel (316 L and 17-4PH). It is shown that intact material interfaces of less than 500×500 μm² can be achieved by careful selection and tailoring of metal powders, injection moulding and co-sintering parameters.     

Moldless Printing of Silicone Lenses with Embedded Nanostructured Optical Filters

In this work, both light‐shaping and image magnification features are integrated into a single lens element using a moldless procedure that takes advantage of the physical and optical properties of mesoporous silicon (PSi) photonic crystal nanostructures. Casting of a liquid poly(dimethylsiloxane) pre‐polymer solution onto a PSi film generates a droplet with a contact angle that is readily controlled by the silicon nanostructure, and adhesion of the cured polymer to the PSi photonic crystal allows preparation of lightweight (10 mg) freestanding lenses (4.7 mm focal length) with an embedded optical component (e.g., optical rugate filter, resonant cavity, and distributed Bragg reflector). The fabrication process shows excellent reliability (yield 95%) and low cost and the lens is expected to have implications in a wide range of applications. As a proof‐of‐concept, using a single monolithic lens/filter element it is demonstrated: fluorescence imaging of isolated human cancer cells with rejection of the blue excitation light, through a lens that is self‐adhered to a commercial smartphone; shaping of the emission spectrum of a white light emitting diode to tune the color from red through blue; and selection of a narrow wavelength band (bandwidth 5 nm) from a fluorescent molecular probe.     

Integrated Approach for Supporting Sustainable Water Resources Management of Irrigation Based on the WEFN Framework

Irrigated agriculture plays a vital role for the socio-economic development of the Mediterranean area, although it has significant impacts on both water and energy resources. Therefore, in a context in which water resources are also experiencing increasing pressures, there is an urgent need for supporting their sustainable management. This may be an extremely challenging task, especially at the local scale, due to the several interconnected dynamics affecting the state of a complex irrigation system. In fact, multiple actors are involved in decision-making processes, and the use of natural resources (and their mutual interactions) strongly depends on their behaviors, which affect the system as a whole. In this context, the present study proposes an integrated methodology, based on the Water Energy Food Nexus (WEFN), specifically focused on the sustainable management of water resources for irrigation. Firstly, a model based on Causal Loop Diagrams (CLD) is developed in order to get a deep insight into the key dynamics behind a complex irrigation system. Secondly, three indices based on the “footprint” concept are identified, in order to synthesize such dynamics. The integration of these two approaches support investigating the whole system and, particularly, understanding the influence of multiple decisional actors on it, as well as the role of a set of key drivers and constraints. This might also allow drawing some relevant conclusions, useful for supporting effective decisions oriented to a sustainable water resources management. Specific reference is made to a case study, the Capitanata irrigation system, located in the Southern Italy.

     

Correction to: Anomaly Detection Techniques in the Gaia Space Mission Data

Journal of Signal Processing Systems -