A Novel Morphological Parameter Predicting Fibrotic Evolution in Myeloproliferative Neoplasms: New Evidence and Molecular Insights

Philadelphia-negative chronic myeloproliferative neoplasms (MPNs) represent a group of hematological disorders that are traditionally considered as indistinct slow progressing conditions; still, a subset of cases shows a rapid evolution towards myelofibrotic bone marrow failure. Specific abnormalities in the megakaryocyte lineage seem to play a central role in this evolution, especially in the bone marrow fibrosis but also in the induction of myeloproliferation. In this review, we analyze the current knowledge of prognostic factors of MPNs related to their evolution to myelofibrotic bone marrow failure. Moreover, we focused the role of the megakaryocytic lineage in the various stages of MPNs, with updated examples of MPNs in vitro and in vivo models and new therapeutic implications.     

Measurement involving human perception and interpretation

The measurement of features related to human perception and interpretation is discussed. After a brief review of the historical framework, the state of the art is presented on the basis of the authors’ experience in the field and their participation in related European projects, with development of experiments, and co-ordination activities. Future research needs and challenges are then addressed.     

Reduced Impact of Induced Gate Noise on Inductively Degenerated LNAs in Deep Submicron CMOS Technologies

Designers of radio-frequency inductively-degenerated CMOS low-noise-amplifiers have usually not followed the guidelines for achieving minimum noise figure. Nonetheless, state-of-the-art implementations display noise figure values very close to the theoretical minimum. In this paper, we point out that this is due to the effect of the parasitic overlap capacitances in the MOS device. In particular, we show that overlap capacitances lead to a significant induced-gate-noise reduction, especially when deep sub-micron CMOS processes are used.Paolo Rossi was born in Milan, Italy, in 1975. He received the Laurea degree (summa cum laude) in electrical engineering from the University of Pavia, Pavia, Italy, in 2000, where he is currently working toward the Ph.D. degree. His research interests are in the field of analog integrated circuits for wireless transceivers in CMOS and BiCMOS technology, with particular focus on the analysis and design of LNA and mixer for multi-standard applications.Francesco Svelto received the Laurea and Ph.D. degrees in electrical engineering from the University of Pavia, Pavia, Italy, in 1991 and 1995, respectively. From 1996 to 1997, he held a grant from STMicroelectronics to design CMOS RF circuits. In 1997, he was appointed Assistant Professor at the University of Bergamo, Italy, and in 2000, he joined the University of Pavia, where he is an Associate Professor. His current research interests are in the field of RF design and high-frequency integrated circuits for telecommunications. Dr. Svelto has been a member of the technical program committee of the IEEE Custom Integrated Circuits Conference since 2000 and the Bipolar/BiCMOS Circuits and Technology Meeting (BCTM) since 2003, and the European Solid State Circuits Conference in 2002. He served as Guest Editor of the March 2003 special issue of the IEEE Journal of Solid-State Circuits, of which he is currently an Associate Editor.Andrea Mazzanti was born in Modena (Italy) in 1976. He received the Laurea degree (summa cum Laude) in Electrical Engineering from the University of Modena and Reggio Emilia, Modena, Italy in 2001. Since 2001 he is pursuing his PhD in Electrical Engineering at University of Modena and Reggio Emilia, Italy. His major research interest are modelling of microwave semiconductor devices and design of CMOS RF integrated circuits, with particular focus on low noise oscillators and analog frequency dividers. During the summer of 2003 he was with Agere Systems, Allentown, PA as an internship student, working on the design of an highly integrated CMOS FM transmitter.Pietro Andreani received the M.S.E.E. from the University of Pisa, Italy, in 1988. He joined the Dept. of Applied Electronics, Lund University, Sweden, in 1990, where he contributed to the development of software tools for digital ASIC design. After working at the Dept. of Applied Electronics, University of Pisa, as a CMOS IC designer during 1994, he rejoined the Dept. of Applied Electronics in Lund as an Associate Professor, where he was responsible for the analog IC course package between 1995 and 2001, and where he received the Ph.D. degree in 1999. He is currently a Professor at the Center for Physical Electronics, ØrstedDTU, Technical University of Denmark, Kgs. Lyngby, Denmark, with analog/RF CMOS IC design as main research field.     

Influence of scattering and two-photon absorption on the optical loss in GaAs-Al/sub 2/O/sub 3/ nonlinear waveguides measured using femtosecond pulses

The influence of scattering and two-photon absorption on the optical loss in GaAs-Al/sub 2/O/sub 3/ semiconductor nonlinear waveguides has been studied using femtosecond pulses. By deploying a scattering technique, loss coefficients were evaluated over an extended wavelength range of 1.3-2.1 /spl mu/m in the near-infrared. A systematic study involving intensity and wavelength dependence of the loss revealed the presence of two-photon absorption for wavelengths below 1.6 /spl mu/m. A simple nonlinear transmission study enabled the separation of the two-photon absorption coefficient from scattering and linear absorption. The calculated two-photon absorption coefficients were /spl sim/9-20 cm/GW.     

Low-noise tape preamplifier with new self-biasing architecture

A low-noise ground-compatible preamplifier for audio signal processing is presented. It amplifies the audio signal coming from a magnetic head producing a total input-referred voltage noise less than 300-nV r.m.s. CCIR/ARM weighted in operative conditions thanks to a low-noise bipolar amplifier, while auto-reverse, metal/normal, and mute facilities are available on chip using low-noise offset-free analog CMOS switches. Total harmonic distortion was less than 0.004% in full dynamic range. This performance was obtained using a nonconventional self-biasing ground-compatible preamplifier architecture, particularly intended for single supply applications, that does not require any external components and auxiliary voltage reference. The preamplifier occupies 1.5 mm/sup 2/ and dissipates 38 mW with a 10-V power supply. A measured power supply rejection of about 120 dB at 1 kHz was obtained using internal regulated voltage supply.<>     

Automatic generation of noise-free time-activity curve with gated blood-pool emission tomography using deformation of a reference curve

This paper describes a new method for assessing clinical parameters from a noisy regional time-activity curve (TAC) in tomographic gated blood-pool ventriculography. This method is based on a priori knowledge on the shape of a TAC, and shape approximation. The rejection method was used to generate different random Poisson deviates, covering standard count levels, of six representative TACs in order to test and compare the proposed method with harmonic and multiharmonic reconstruction methods. These methods were compared by evaluating four clinical parameters: time of end systole, amplitude, peak ejection and filling rates. Overall, the accuracy of assessment of these parameters was found to be better with the method described in this paper than with standard multiharmonic fits.     

A scanning electron microscopy study of diseased root surfaces conditioned with EDTA gel plus Cetavlon after scaling and root planing

In the present investigation, a scanning electron microscopy analysis was performed to evaluate the effects of the topical application of ethylenediaminetetraacetic acid (EDTA) gel associated with Cetavlon (EDTAC) in removing the smear layer and exposing collagen fibers following root surface instrumentation. Twenty-eight teeth from adult humans, single rooted and scheduled for extraction due to periodontal reasons, were selected. Each tooth was submitted to manual (scaling and root planing) instrumentation alone or combined with ultrasonic instruments, with or without etching using a 24% EDTAC gel. Following extraction, specimens were processed and examined under a scanning electron microscope. A comparative morphological semi-quantitative analysis was performed; the intensity of the smear layer and the decalcification of cementum and dentinal surfaces were graded in 12 sets using an arbitrary scale ranging from 1 (area covered by a smear layer) to 4 (no smear layer). Root debridement with hand instruments alone or combined with ultrasonic instruments resulted in a similar smear layer covering the root surfaces. The smear layer was successfully removed from the surfaces treated with EDTAC, which exhibited numerous exposed dentinal tubules and collagen fibers. This study supports the hypothesis that manual instrumentation alone or instrumentation combined with ultrasonic instrumentation is unable to remove the smear layer, whereas the subsequent topical application of EDTAC gel effectively removes the smear layer, uncovers dentinal openings and exposes collagen fibers.     

Clock Faults Induced Min and Max Delay Violations

In this paper, we show that clock faults producing duty-cycle variations, which have been proven very likely, can give rise to min or max delay violations. This mandates new, specific testing approaches for clock faults, to avoid them to compromise the system correct operation in the field, with dramatic effects on product quality and defect level. We then introduce a new scheme that can be employed to detect the clock faults causing duty-cycle variations.     

A 0.18 μm CMOS direct down-converter for highly integrated 3G receivers

This paper presents the design of a high dynamic range direct down-converter for 3G cell-phone applications. The mechanisms responsible for second-order intermodulation distortion are discussed in details, leading to the following design strategy: the transconductor is degenerated by means of an RC filter, an LC network resonating at RF frequency loads the switching pair and carefully matched resistors are used in the output load. Prototypes realized in 0.18 μm CMOS show: +78 dBm IIP2 minimum among 40 samples, +10 dBm IIP3, 4 nV/√Hz input-referred noise density while burning only 4 mA from 1.8 V.     

Susceptible Workload Evaluation and Protection using Selective Fault Tolerance

Low power fault tolerance design techniques trade reliability to reduce the area cost and the power overhead of integrated circuits by protecting only a subset of their workload or their most vulnerable parts. However, in the presence of faults not all workloads are equally susceptible to errors. In this paper, we present a low power fault tolerance design technique that selects and protects the most susceptible workload. We propose to rank the workload susceptibility as the likelihood of any error to bypass the logic masking of the circuit and propagate to its outputs. The susceptible workload is protected by a partial Triple Modular Redundancy (TMR) scheme. We evaluate the proposed technique on timing-independent and timing-dependent errors induced by permanent and transient faults. In comparison with unranked selective fault tolerance approach, we demonstrate a) a similar error coverage with a 39.7% average reduction of the area overhead or b) a 86.9% average error coverage improvement for a similar area overhead. For the same area overhead case, we observe an error coverage improvement of 53.1% and 53.5% against permanent stuck-at and transition faults, respectively, and an average error coverage improvement of 151.8% and 89.0% against timing-dependent and timing-independent transient faults, respectively. Compared to TMR, the proposed technique achieves an area and power overhead reduction of 145.8% to 182.0%.