Distribution of morphology and transport properties of water vapor in injection‐molded biodegradable aliphatic polyester

A biodegradable polyester, poly(tetramethylene dodecanedioate), was injection molded in a rectangular cavity. Thin sections were sliced from molded samples starting from the skin. The morphology distribution inside the molded samples was studied by X‐ray analysis. The diffusion and solubility coefficient of water vapor were then measured using the microgravimetric method at the temperature of 30°C. Results show that morphology developed during the process influences the diffusion of water molecules through the polymer matrix. In particular, a direct influence of crystalline degree on the sorption and diffusion parameters was identified. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photocatalytic oxidation of oxalic acid in dilute aqueous solution,in a fully illuminated fluidized bed reactor

A comprehensive kinetic model for the photooxidation of oxalic acid (C₂O₄H₄) in a fluidized bed (FB) of a TiO₂/quartz sand composite, in a UV-fully illuminated photoreactor, was developed and correlated with experimental results. A proper solution for the mass balance of the reacting system was achieved by combining the complete radiation field profile and the most recent and updated pathway for the adsorption and photodecomposition of oxalic acid onto TiO₂ (Mendive et al., 2007), which was employed to determine the kinetic expression and model parameters.     

Filter-based feature selection in the context of evolutionary neural networks in supervised machine learning

Pattern Analysis and Applications - This paper presents a workbench to get simple neural classification models based on product evolutionary networks via a prior data preparation at attribute level...     

Oxidative and photochemical processes for the removal of galaxolide and tonalide from wastewater

Synthetic musks have been reported in wastewaters at concentrations as high as tens of micrograms per litre. The two most significant polycyclic musk fragrance compounds are 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta(g)-2-benzopyran (HHCB, trade name galaxolide^®) and 7-acetyl-1,1,3,4,4,6-hexamethyltetrahydronaphthalene (AHTN, trade name tonalide^®). We report the result of several irradiation and advanced oxidation processes carried out on samples of the effluent of a wastewater treatment plant located in Alcalá de Henares, Madrid. Wastewater samples were pre-ozonated and spiked with 500 ng/L of tonalide or galaxolide in order to obtain final concentrations in the same order as the raw effluent. The treatments assayed were ozonation with and without the addition of hydrogen peroxide (O₃, O₃/H₂O₂), ultraviolet (254 nm low pressure mercury lamp) and xenon-arc visible light irradiation alone and in combination with ozone (UV, O₃/UV, Xe, O₃/Xe) and visible light photocatalytic oxidation using a Ce-doped titanium dioxide photocatalyst performed under continuous oxygen or ozone gas bubbling (O₂/Xe/Ce-TiO₂, O₃/Xe/Ce-TiO₂). In all cases, samples taken at different contact times up to 15 min were analyzed. An analytical method based on stir bar sorptive extraction (SBSE), followed by comprehensive two-dimensional gas chromatography (SBSE-GC × GC-TOF-MS), was used for the automatic searching and evaluation of the synthetic musks and other nonpolar or semipolar contaminants in the wastewater samples. In all cases tonalide was more easily removed than galaxolide. The best results for the latter (more than 75% removal after 5 min on stream) were obtained from ozonation (O₃) and visible light photocatalytic ozonation (O₃/Xe/Ce-TiO₂). A significant removal of both pollutants (∼60% after 15 min) was also obtained during visible light photocatalysis (O₂/Xe/Ce-TiO₂). UV radiation was able to deplete tonalide (+90%) after 15 min but only reduced the concentration of galaxolide to about half of its initial concentration. The toxicity of treated samples decreased for O₃/UV and O₃/Ce-TiO₂, but increased during irradiation processes UV, Xe and Xe/Ce-TiO₂. Ozone treatments tend to decrease toxicity up to a certain dosage, from which point the presence of toxic transformation products has adverse effects on aquatic microorganisms.     

Chronic pain in the lives of older women

We investigated the effect of chlorpromazine (CPZ) in a murine model of T-cell-dependent liver injury caused by concanavalin A (ConA). CPZ (3 and 10 mg/kg) treatment 1 h before ConA injection prevented liver injury. CPZ (3, 10 mg/kg) administered 1 h after a ConA injection was also hepatoprotective, whereas cyclosporin (CsA, 100 mg/kg) was active only when given before ConA. Under either condition, CsA but not CPZ prevented concurrent increases in splenic ornithine decarboxylase (ODC) activity, a putative index of T-cell proliferation/differentiation. CPZ down-regulated tumor necrosis factor-alpha (TNF-alpha) and up-regulated IL-10 in mice that then received ConA, whereas delayed administration of CPZ had no effect. These results suggest that CPZ prevented liver injury without affecting the proliferation/differentiation of T-cells. The dissociation of hepatoprotection by CPZ from cytokine modulation indicates that this drug intervenes in the adherence of T-cells or the death of hepatocytes in the ConA-model.     

Failure Analysis of Modern Silicon Dice

Although the utilization of silicon dice in electronic devices has been in place for approximately 50 years, its widespread application has occurred more recently with the rapid expansion of the consumer markets for digital devices such as cameras, personal computers, video players, and smart phones. In particular, due to the recent market drive in the miniaturization and cost reduction of electronic products, silicon dice are often utilized without encapsulation and mounted directly to the substrate by means of conductive adhesives or BGA mounting. Silicon die often need to be thinned to a few hundred micrometers thickness to fit into compact devices and to reduce parasitics. The intrinsic brittle nature of silicon in combination with the lack of mechanical protection such as encapsulation has made fracture of bare dice a typical failure mechanism in handheld electronic devices. In the current work, we tested to failure {100} silicon dice and obtained mirror–mist boundary measurements for correlation to the fracture strengths of the parts. This work will also present various practical examples of how to reliably conduct failure analysis of fractured silicon dice. The intrinsic brittle nature of silicon in combination with the lack of mechanical protection such as encapsulation has made fracture of bare dice a typical failure mechanism in handheld electronic devices such as cameras, portable computers, tablets, media players, and smart phones. In these products, silicon dice are often utilized without encapsulation and are attached directly to the substrate by means of conductive adhesives or ball grid array mounting. Modern silicon dice used in these products typically have small dimensions and higher flexural strength compared to their predecessors. Prior silicon fractographic findings have investigated low strength failures. In the current work, we extend the quantitative fractography of silicon to the high failure stress regime. We have mechanically tested modern silicon dice to failure by four‐point bending and obtained mirror–mist boundary measurements for correlation to the fracture strengths of the specimens. Two key areas are addressed which improve the practical application of quantitative fractography to modern silicon dice: (1) application of silicon fractography to high flexural strength regimes and (2) development of a systematic means of reliably measuring fracture surface features.