海门市有线数字电视前端平台的设计与实践

介绍了有线数字电视前端平台建设的具体思路。从建设背景、建设目标、设计原则、业务规划、系统软硬件技术方案等几个方面,详细阐述了海门数字电视前端平台规划建设特点。     

GB20600标准的LDPC码的改进

尽管LDPC码已经被GB20600标准采纳作为信道编码,与其它LDPC码相比,在同样码长和码率的情况下,GB20600 LDPC码误码率性能并非最佳;GB20600标准的LDPC码的码长达7493,存在编码复杂性问题,但是GB20600 LDPC码未采用基于校验矩阵的快速算法,这给GB20600 LDPC编解码器的硬件实现带来较大的困难。本文在现有GB20600 LDPC码的设计框架下,对GB20600中LDPC码的校验矩阵进行了修改,在此基础上提出一种有效的LDPC码的快速迭代算法,使编解码器的硬件易于实现。改进后的LDPC码的编码算法具有较低的实现复杂度。仿真结果表明,改进后的LDPC码的误包率性能优于现GB20600中LDPC码的误包率性能。      

利用移动终端定位和概率分布的话务量地理分布预测

为了更加实用、快速、准确地对话务量地理分布进行预测,使用CTR数据作为研究数据,以移动终端定位技术为基础,将概率分布模型用于话务量地理分布的预测上,提出了一种利用移动终端定位技术和概率分布模型的话务量地理分布预测方法,并通过MATLAB进行实现。同时,该方法在利用移动终端定位技术进行计算时,还考虑了天线方向增益的影响,将有望降低移动终端定位技术本身所产生的误差。     

线性光放大器的宽带自发辐射噪声分析

建立含有垂直光场(VCL)的线性光放大器(LOAs)稳态仿真模型,考虑了宽带噪声特性、端面反射和纵向空间烧孔效应。计算了在不同输入信号功率和垂直腔分布布喇格反射器(DBR)反射率下总的输出ASE噪声功率、噪声系数(NF)、前向和后向传输的ASE噪声光子速率和噪声谱分布的变化。结果表明,与传统光放大器(SOAs)相比,在增益非饱和区,LOA有很好的噪声钳制作用,ASE噪声几乎不随信号功率的改变而变化。在增益饱和区,破坏了VCL的钳制作用,NF有所上升,但上升的速率小于SOA。提高DBR反射率,总的输出ASE噪声功率减小,但NF有所增大。     

Dynamic hierarchical collaborative caching scheme in ultra-dense networks

Pushing popular contents to the edge of the network can meet the growing demand for data traffic, reduce latency and relieve the pressure of the backhaul. However, considering the limited storage space of the base stations, it is impossible to cache all the contents, especially in ultra-dense network ( UDN). Furthermore, the uneven distribution of mobile users results in load imbalance among small base stations (SBSs) in both time and space, which also affects the caching strategy. To overcome these shortcoming, the impact of the changing load imbalance in UDN was investigated, and then a dynamic hierarchical collaborative caching (DHCC) scheme was proposed to optimize latency and caching hit rate. The storage of the SBS is logically divided into the independent caching layer and the collaborative caching layer. The independent caching layer caches the most popular contents for local users爷interest, and the collaborative caching layer caches contents as much as possible for the benefit of content diversity in the region. Different SBSs have respective storage space layer division ratios, according to their real-time traffic load. For SBSs with heavy load, the independent caching layers are allocated with more space. Otherwise, the collaborative caching layers could store more contents with larger space. The simulation results show that, DHCC improved both transmission latency and hit rate compared with existing caching schemes.     

Polymer-Based Solid Electrolytes: Material Selection,Design, and Application

Polymer-based solid electrolytes (PSEs) have attracted tremendous interests for the next-generation lithium batteries in terms of high safety and energy density along with good flexibility. Remarkable performances have been demonstrated in PSEs, which endowed PSEs with the potential to replace liquid electrolytes to meet the market demands. In this review, polymer matrices, different polymer architectures, and functional filler materials used in PSEs are discussed to explore the design concepts, methodologies, working mechanisms, and pros and cons of various PSEs. In addition, their recent notable applications in all-solid-state lithium ion batteries, lithium–sulfur batteries, suppression of lithium dendrites, and flexible lithium batteries are also introduced. Finally, the challenges and future prospects are sketched to provide strategies to explore novel PSEs for high-performance all-solid-state lithium batteries.     

多光子J-C模型的研究

本文推广二能级原子J-C模型到多光子过程。求得在存在偏调情况下,单模相干场对二能级原子激发时的光子数几率分布函数,由此研究了原子受激辐射性质。     

钽钪酸铅-钛酸铅制备工艺研究

采用XRD、SEM等分析技术,研究了制备工艺与(1x)Pb(Sc1/2Ta1/2)O3xPbTiO3(简称PSTT)结晶性能的关系。如选择适当的组分,在适当的温度下采用传统的电子陶瓷混合氧化物法可以获得全钙钛矿相结构的PSTT陶瓷;PSTT陶瓷晶粒细小均匀。