c-BN color change with bonded water added into the h-BN–Mg system

Cubic boron nitride (c-BN) crystals were synthesized in conditions of high temperature and high pressure (HTHP) when different kinds of bonded water were respectively added into the system of h-BN–Mg. All bonded water used in this work could reduce the temperature of growing c-BN compared to that in the system of h-BN–Mg. The c-BN color could change from black to yellow when certain amounts of bonded water, such as NiSO₄·6H₂O and CuSO₄·5H₂O, Mg(OH)_2, were added. However, c-BN color remained black no matter how much bonded water, such as NiCl₂·6H₂O, CuCl₂·2H₂O, and SnCl₂·2H₂O, was added. The bonded water can be classified into Chlorine-containing bonded water (Cl-BW) and Chlorine-free bonded water (ClF-BW) according to their different characters and effects on the synthesized c-BN color.     

企业信息化中的网络存储整合应用

首先介绍了网络存储技术中NAS技术和SAN技术的基本原理,并对两者的特性进行了比较;然后详细介绍了企业信息化过程中网络存储整合的一个典型案例,分析了其整合前存在的不足,制定有效的整合实施方案,并对实施过程中许多关键技术部分进行了阐述,最终很好的达到了预定目标;最后总结了网络存储整合需要规划多种技术相融合的必要性.     

Overexpression of amyloid precursor protein of Alzheimer's type in brains of intoxicated children

The coincidence of neuronal stress induced by intoxication and an overexpression of amyloid precursor protein (APP) in the brains of children was examined. Brains of ten children accidentally intoxicated by poisonous mushroom were studied by means of immunohistochemical methods using monoclonal antibodies generated against different domains of APP and glial cell markers. Overexpression of APP was found in the brain neurons of all intoxicated children. Neurons were immunopositive with the antibodies generated against the middle (amyloid beta protein) domain of APP. No extracellular deposits were found in the tissue. Our results provided, for the first time, the evidence that overexpression of APP concomitant with the neuronal stress is age-independent phenomenon appearing not only in the brain of adults but in very young individuals as well.     

矿井串联系统模糊可靠性理论的研究

矿井系统不仅具有随机性，而且同时也具有模糊性，在系统分析与设计过程中应同时考虑这两种不确定性因素的影响。文中提出了模糊故障、模糊功能、系统模糊运营状态和广义可靠度等概念，并在此基础上提出了求单元及串联系统的生产能力、营运费用、应急维修费用、修理时间和广义可靠度等指标的方法，建立了使系统平均生产能力最大的系统最优运营策略的数学模型。     

X荧光光谱法测定不锈钢的研究

本文论述了Ｘ荧光光谱测定高铬钢和不锈钢的分析方法，用理论α系数校正基体效应和用谱线干扰系数Ｌ校正谱线重叠影响。方法准确度和精度令人满意，操作十分简便、快速。     

Performance implications of the thermal-induced frequency drift infast wavelength switched systems with heterodyne detection

The frequency modulation response and tuning dynamics of a two-section DFB laser are determined by carrier and thermal modulation of the active layer refractive index. In response to a step change in the injection current for switching between channels in a wavelength division multiplexed system, the optical frequency changes rapidly due to the carrier effect, and then slowly drifts toward a steady state value due to the thermal effect. For wavelength switched applications with heterodyne detection, the drifting of the optical frequency broadens the spectrum of the IF signal and may impose a limit on the time that the signal remains within the IF passband (residency time). The IF spectral broadening and residency time are investigated theoretically and experimentally. Based upon a minimum mean square error fit between experimental and theoretical FM responses, the dependence of the spectral broadening and residency time on the bias condition of the laser and the optical frequency switching interval is characterized     

FAST MEASUREMENT OF ASH CONTENT IN COAL WASHING PLANT

The coal filter cake is a product of fine coal after floatation which has an ash content of 7-13%, water content of 30±2%, and a particle size of less than 1 mm. The ash content was measured by the intensity of the single backscattered gamma-ray, and its accuracy is mainly dependent on the energy of the gamma-ray. The 238Pu low energy photon source is selected in this work. The energy of its gamma-ray is 15 keV, which can result not only in the best sensitivity, but also in the lowest contribution to the environment radiation. The root mean square deviation of the ash measurement is±0.33% (±1σ).     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.