Performance Evaluation of a Novel Converged Architecture for Digital-Video Transmission Over Optical Wireless Channels

A robust channel coding architecture for multigigabit-per-second digital-video transmission over the optical wireless channel is introduced and evaluated. The proposed scheme combines low-density parity-check coding with channel interleaving to improve the transmission over turbulent temporally correlated optical wireless channels while satisfying real-time video delay constraints. Frame error rates of the presented code design are evaluated via simulation for intensity-modulation/direct-detection optical wireless links in both lognormal- and Rayleigh-fading channels. Results indicate that the performance of the proposed system is effective across a large range of atmospheric turbulence strengths and achieves significant temporal diversity in moderately long (10 ms) temporal correlation times while satisfying a 0.3-s real-time delay constraint. Moreover, the proposed design is shown to outperform the Reed-Solomon codes prevalent in the legacy fiber and wireless digital-television distribution systems.     

Magnetic properties of Co- and Mn-implanted BaTiO3, SrTiO3 and KTaO3

Implantation of Co or Mn into single-crystal BaTiO₃(K), SrTiO₃ or KTaO₃(Ca), followed by annealing at 700 °C, produced ferromagnetic behavior over a broad range of transition metal concentrations. For BaTiO₃, both Co and Mn implantation produced magnetic ordering temperatures near 300 K with coercivities 70 Oe. The M–T plots showed either a near-linear decrease of magnetization with increasing temperature for Co and a non-Brillouin shaped curve for Mn. No secondary phases were detected by high-resolution X-ray diffraction. The same basic trends were observed for both SrTiO₃ and KTaO₃, with the exception that at high Mn concentrations (5 at.%) the SrTiO₃ was no longer ferromagnetic. Our results are consistent with recent reports of room temperature ferromagnetism in other perovskite systems (e.g. LaBaMnO₃) and theoretical predictions for transition metal doping of BaTiO₃ [Nakayama et al., Jap. J. Appl. Phys. 40 (2001) L1355].     

Electrical polarization control of vertical-cavity surface-emittinglasers using polarized feedback and a liquid crystal

We report electrical control of the polarization state of a vertical-cavity surface-emitting laser (VCSEL), The VCSEL is subject to strong external optical feedback (up to 6% of emission), with polarization controlled by a liquid-crystal (LC) element, It is found that the contrast ratio of the complete system can be enhanced compared to the contrast ratio of the LC element alone     

Experimental Study of Planar Finite Grid Oscillator Arrays

Results of an experimental study on finite grid oscillator arrays and the effects of the edge element loading stubs in such arrays are presented. Three finite grid oscillator arrays, based on the same unit cell, with different number of unit were fabricated on RT/Duroid 5870 substrate and tested in terms of the oscillation frequencies, radiated power and radiation patterns. It is observed that the oscillation frequency of a finite grid array differs from the theoretically prediction based on the infinite array assumption and is strongly affected by the edge element loading stubs. The measurement also indicates that mode-jumping and multi-frequency (spurious) oscillation can exist in grid oscillator arrays.     

A fast iterated conditional modes algorithm for water-fat decomposition in MRI

Decomposition of water and fat in magnetic resonance imaging (MRI) is important for biomedical research and clinical applications. In this paper, we propose a two-phased approach for the three-point water-fat decomposition problem. Our contribution consists of two components: 1) a background-masked Markov random field (MRF) energy model to formulate the local smoothness of field inhomogeneity; 2) a new iterated conditional modes (ICM) algorithm accounting for high-performance optimization of the MRF energy model. The MRF energy model is integrated with background masking to prevent error propagation of background estimates as well as improve efficiency. The central component of our new ICM algorithm is the stability tracking (ST) mechanism intended to dynamically track iterative stability on pixels so that computation per iteration is performed only on instable pixels. The ST mechanism significantly improves the efficiency of ICM. We also develop a median-based initialization algorithm to provide good initial guesses for ICM iterations, and an adaptive gradient-based scheme for parametric configuration of the MRF model. We evaluate the robust of our approach with high-resolution mouse datasets acquired from 7T MRI.     

5-GHz 32-bit integer execution core in 130-nm dual-V/sub T/ CMOS

A 32-bit integer execution core containing a Han-Carlson arithmetic-logic unit (ALU), an 8-entry /spl times/ 2 ALU instruction scheduler loop and a 32-entry /spl times/ 32-bit register file is described. In a 130 nm six-metal, dual-V/sub T/ CMOS technology, the 2.3 mm/sup 2/ prototype contains 160 K transistors. Measurements demonstrate capability for 5-GHz single-cycle integer execution at 25/spl deg/C. The single-ended, leakage-tolerant dynamic scheme used in the ALU and scheduler enables up to 9-wide ORs with 23% critical path speed improvement and 40% active leakage power reduction when compared to a conventional Kogge-Stone implementation. On-chip body-bias circuits provide additional performance improvement or leakage tolerance. Stack node preconditioning improves ALU performance by 10%. At 5 GHz, ALU power is 95 mW at 0.95 V and the register file consumes 172 mW at 1.37 V. The ALU performance is scalable to 6.5 GHz at 1.1 V and to 10 GHz at 1.7 V, 25/spl deg/C.     

Nitroxide Radicals@US‐Tubes: New Spin Labels for Biomedical Applications

The encapsulation of nitroxide radicals within ultrashort (ca. 50 nm) single‐walled carbon nanotubes (US‐tubes) is achieved. Tempo‐ and Iodo‐Tempo@US‐tubes are characterized by thermogravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Electron paramagnetic resonance (EPR) spectra display characteristic signals due to the detection of the spin probes within the US‐tubes. Longitudinal proton relaxivities (r₁) of both nitroxide@US‐tubes samples are 7 to 13 times greater than the free nitroxide radicals in solution, giving relaxivities comparable to the clinical contrast agent (CA) Magnevist. In addition, transverse proton relaxivities (r₂) show unprecedented proton relaxation enhancement in comparison to any other reported nitroxide radical‐based system or the clinically approved T₂ CA, Resovist, under the same conditions. T₂‐weighted magnetic resonance imaging (MRI) phantom images show that the encapsulation of nitroxide radicals within the US‐tubes produces good contrast enhancement due to their high r₂ relaxivities. The nitroxide radicals@US‐tube agents are a new promising class of spin probes for MRI and electronic paramagnetic resonance imaging (EPRI) labeling, tracking, and diagnosis.     

A scheduling application for WDM optical networks

Optical networking using WDM technology has matured considerably, and commercial WDM network equipment and WDM network control and management prototypes have appeared. To use such a network efficiently, a scheduling facility and its enabling mechanisms have to be provided. This scheduling facility should be integrated to interoperate with the rest of the network control and management software such as connection manager or signaling daemon. We present a scheduling application to address this need. The architecture for the application and its key components are presented. Agent-related enabling mechanisms are introduced to monitor the optical signal quality and collect performance measurements. A resource broker is used to manage the communication and interoperability between agents and the application. An event service is developed to decouple the communication between the agents and the scheduling application, and to enable the communication among the agents themselves. The scheduling application consists of the quality of signal information and threshold objects, current network usage, history data module, scheduling module, and access to a performance database. To provide traffic control and high network resource utilization, the application is equipped with wavelength scheduling algorithms. An experimental study for the basic scheduling algorithms has been conducted over the MONET DC network.     

Inductively heated shape memory polymer for the magnetic actuation of medical devices

Presently, there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with nickel zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.     

混合信号SoC设计的现状与未来

从消费电子市场最容易得到的经验是集成为王。移动型战胜便携型,掌上型战胜移动型,而衬衫口袋型又超过掌上型。即使像游戏机这类桌面设备,时髦的外形和低制造成本目标也要靠更高集成度才能实现。这一趋势并不限于低成本的消费电子产品。军用、汽