低温等离子体对血管内金属支架的表面改性

生物材料用于人体必须要具备生物相容性。尤其是与血液相接触的材料如血管内支架必须要具备血液相容性。材料的表面特性直接影响血液系统中是否会出现血栓。本文针对金属血管内支架的表面特性、与血液的界面反应以及用于提高血液相容性的低温等离子表面改性进行了简要综述     

鱼雷罐喷粉预处理过程水模研究

在鱼罐喷粉预处理水模实验数据的基础上，进一步利用线性回归确定各工艺操作参数对喷吹基本参数（均混时间、粉剂穿透比和粉剂停留时间）的影响，得出各传输动力学基本参数的函数关系式。     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

α—当归内酯的合成及在烟草香精中的应用

α-当归内酯是一种香味成分,它具有甜香、枫械香等多种香韵,在烟草香精中有广泛的用途。本文对α-当归内酯的合成方法进行了研究,提出了一条合理可行的的工艺路线;同时通过对α-当归内酯在烟用香精中的应用试验,证明了它是一种理想的烟草香味添加剂。     

B—ISDN宽带UNI信令点到多点配置的实现

本文根据ＩＴＵ－Ｔ最新的Ｑ．２９７１协议，以及笔者所从事的实际课题，提出一整套Ｂ－ＩＳＤＮ第三层ＵＮＩ信令的软件实现策略，其特点是能同时满足用户对点到点以及点到多点广播这两种通信方式的要求，而且可以动态配置。     

深过冷熔体激发快速定向凝固

阐述了深过冷的方法，深过冷的遗传性，深过冷度的理论极限以及深过冷熔体激发发快速定向凝固的试验方法及其凝固过程，给出了深过冷熔体（Ｃｕ－５ｗｔ％）激发快速定向凝固与铸态试验激发快速定向凝固的初步试验结果。     

沉积方式与基体材料对TiN薄膜内应力的影响

本文研究了TiN薄膜在化学气相沉积、物理气相沉积(包括热灯丝离子镀和多弧离子镀)以及等离子增强化学气相沉积等不同生成条件下的内应力变化。并通过改变钢及硬质合金基体的化学成份和表面状态。考察了基体材料对薄膜应力的影响。在此基础上,对薄膜内应力的形成机制进行了分析讨论。     

Results of initial surgery and adjuvant chemotherapy in treating small-cell lung cancer

The changes in the intestinal mucosal permeability were observed by quantitatively assessing plasma to luminal clearance of 99mTc-labeled DTPA, and the influence of platelet activating factor (PAF) on it was investigated. The results showed that intestinal permeability was significantly elevated after severe burn and was positively correlated with increase in PAF in the intestinal tissue (r = 0.94, P < 0.01). PAF antagonist therapy could significantly attenuate postburn intestinal mucosal permeability. It is concluded that PAF is one of the important factors causing increased intestinal permeability after severe burn.     

Phase equilibria in InAsSbP quaternary alloys grown by liquid phase epitaxy

The quaternary alloy InAs_1−x−ySb_xP_y, lattice-matched to InAs, is a promising material for the production of infrared light sources for the detection of gases in the 2–4 μm region of the spectrum. In this work, thermodynamic phase equilibrium calculations have been carried out to determine the compositions required for liquid phase epitaxial growth and the extent of the miscibility gap in the solid material. For high band gap materials, the desired growth temperature is found to be intermediate between a low temperature required to grow P-rich solids and higher temperatures required to avoidspinodal decomposition. Conventional LPE growth at an intermediate temperature of 583°C is found to produce good material with high luminescence efficiency and excellent optical characteristics. Problems with phosphorus loss from the melt are also discussed and lower growth temperatures are found to considerably reduce this problem. Growth in the metastable region between the binodal and spinodal lines has been achieved with the production of phosphorus-rich solids with concentrations up to y = 0.445.