Bacillus subtilis: As an Efficient Bacterial Strain for the Reclamation of Water Loaded with Textile Azo Dye,Orange II

The azo dye orange II is used extensively in the textile sector for coloring fabrics. High concentrations of it are released into aqueous environments through textile effluents. Therefore, its removal from textile wastewater and effluents is necessary. Herein, initially, we tested 11 bacterial strains for their capabilities in the degradation of orange II dye. It was revealed in the preliminary data that B. subtilis can more potently degrade the selected dye, which was thus used in the subsequent experiments. To achieve maximum decolorization, the experimental conditions were optimized whereby maximum degradation was achieved at: a 25 ppm dye concentration, pH 7, a temperature of 35 °C, a 1000 mg/L concentration of glucose, a 1000 mg/L urea concentration, a 666.66 mg/L NaCl concentration, an incubation period of 3 days, and with hydroquinone as a redox mediator at a concentration of 66.66 mg/L. The effects of the interaction of the operational factors were further confirmed using response surface methodology, which revealed that at optimum conditions of pH 6.45, a dye concentration of 17.07 mg/L, and an incubation time of 9.96 h at 45.38 °C, the maximum degradation of orange II can be obtained at a desirability coefficient of 1, estimated using the central composite design (CCD). To understand the underlying principles of degradation of the metabolites in the aliquot mixture at the optimized condition, the study steps were extracted and analyzed using GC-MS(Gas Chromatography Mass Spectrometry), FTIR(Fourier Transform Infrared Spectroscopy), ¹H and carbon 13 NMR(Nuclear Magnetic Resonance Spectroscopy). The GC-MS pattern revealed that the original dye was degraded into o-xylene and naphthalene. Naphthalene was even obtained in a pure state through silica gel column isolation and confirmed using ¹H and ¹³C NMR spectroscopic analysis. Phytotoxicity tests on Vigna radiata were also conducted and the results confirmed that the dye metabolites were less toxic than the parent dye. These results emphasize that B. subtilis should be used as a potential strain for the bioremediation of textile effluents containing orange II and other toxic azo dyes.     

Green Tea Catechins: Nature’s Way of Preventing and Treating Cancer

Green tea’s (Camellia sinensis) anticancer and anti-inflammatory effects are well-known. Catechins are the most effective antioxidants among the physiologically active compounds found in Camellia sinesis. Recent research demonstrates that the number of hydroxyl groups and the presence of specific structural groups have a substantial impact on the antioxidant activity of catechins. Unfermented green tea is the finest source of these chemicals. Catechins have the ability to effectively neutralize reactive oxygen species. The catechin derivatives of green tea include epicatechin (EC), epigallocatechin (EGC), epicatechin gallate (ECG) and epigallocatechin gallate (EGCG). EGCG has the greatest anti-inflammatory and anticancer potential. Notably, catechins in green tea have been explored for their ability to prevent a variety of cancers. Literature evidence, based on epidemiological and laboratory studies, indicates that green tea catechins have certain properties that can serve as the basis for their consideration as lead molecules in the synthesis of novel anticancer drugs and for further exploration of their role as pharmacologically active natural adjuvants to standard chemotherapeutics. The various sections of the article will focus on how catechins affect the survival, proliferation, invasion, angiogenesis, and metastasis of tumors by modulating cellular pathways.     

Gene subset selection using an iterative approach based on genetic algorithms

Microarray data are expected to be useful for cancer classification. However, the process of gene selection for the classification contains a major problem due to properties of the data such as the small number of samples compared with the huge number of genes (higher-dimensional data), irrelevant genes, and noisy data. Hence, this article aims to select a near-optimal (small) subset of informative genes that is most relevant for the cancer classification. To achieve this aim, an iterative approach based on genetic algorithms has been proposed. Experimental results show that the performance of the proposed approach is superior to other previous related work, as well as to four methods tried in this work. In addition, a list of informative genes in the best gene subsets is also presented for biological usage.     

Design of dual‐band microstrip patch antenna with right‐angle triangular aperture slot for energy transfer application

This work focusing on the dual‐band antenna design with rectifying circuit for energy transfer system technology for enhancement gain performance. The air gap technique is applied on this microstrip antenna design work to enhance the antenna gain. The work begins with designing and analyzing the antenna via the CST Microwave Studio software. After validation on acceptable performance in simulation side is obtained, the return loss, S₁₁ of the antenna is measured using vector network analyzer equipment. The rectifier circuit is used to convert the captured signal to DC voltage. This projected dual‐band antenna has successfully accomplished the target on return loss of ?44.707 dB and ?32.163 dB at dual resonant frequencies for 1.8 GHz and 2.4 GHz, respectively. This proposed antenna design benefits in low cost fabrication and has achieved high gain of 6.31 dBi and 7.82 dBi for dual‐band functioning frequencies.     

Ergogenic Attributes of Young and Mature Coconut (Cocos nucifera L.) Water Based on Physical Properties,Sugars and Electrolytes Contents

The present work aimed to compare the main ergogenic attributes of two commercialized stages (young and mature) of coconut water (CW) obtained from four coconut varieties. The changes of electrolytes and sugars in CW upon maturation were quantified by inductively coupled plasma mass spectrophotometer and high-performance liquid chromatography, respectively. Based on the electrolyte profiling, potassium yielded the highest amount (ranging from 237.41 to 361.20 mg/100 mL) followed by sodium, magnesium, calcium, iron, manganese, copper, selenium, and zinc across all the maturity stages tested. For sugars, there were lower amounts of fructose and glucose, but a higher amount of sucrose with the maturation of the fruits. In conclusion, the amount of beneficial nutrients in the form of sugars and minerals was higher than that of young CW, and the ergogenic attributes of mature CW especially from MATAG variety (M-MATAG) were the best to be exploited further in the development of natural energy drinks.     

Occurrence of phthalate metabolites in human urine from several Asian countries

The occurrence of 14 phthalate metabolites was found in human urine samples collected from seven Asian countries: China, India, Japan, Korea, Kuwait, Malaysia, and Vietnam. Phthalate metabolites were found in all samples, indicating widespread exposure of humans to phthalates in these Asian countries. The highest total (the sum of 14 phthalates) phthalate metabolite concentrations were found in samples collected from Kuwait (median: 1050 ng/mL), followed in decreasing order by samples from India (389 ng/mL), China (234 ng/mL), Vietnam (133 ng/mL), Japan (120 ng/mL), Korea (117 ng/mL), and Malaysia (94.9 ng/mL). The creatinine-adjusted median concentrations of total phthalates for urine samples from Kuwait, India, China, Vietnam, Japan, Korea, and Malaysia were 692, 506, 289, 119, 103, 104, and 169 μg/g creatinine, respectively. Monomethyl phthalate (mMP), monoethyl phthalate (mEP), mono (2-isobutyl phthalate) (miBP), mono-n-butyl phthalate (mBP), and metabolites of di-(2-ethylhexyl) phthalate (DEHP) were the dominant compounds, collectively accounting for >95% of the total concentrations in the samples from the seven countries. The profiles of urinary phthalate metabolite concentrations varied among the samples collected from the seven countries. Urine samples from Kuwait contained the highest concentrations of mEP (median: 391 ng/mL), mBP (94.1 ng/mL), and the metabolites of DEHP (202 ng/mL), whereas samples from China and Japan contained the highest concentrations of miBP (50.8 ng/mL) and mMP (17.5 ng/mL), respectively. mEP was the predominant metabolite in urine samples from India and Kuwait (accounting for 49% of the total), mBP and miBP were the predominant compounds in samples from China (52%), and DEHP metabolites were the predominant compounds in samples from Korea (46%) and Vietnam (52%). Based on the urinary concentrations of mEP, mBP, miBP, and DEHP metabolites of the samples from the seven Asian countries, we estimated daily intake rates of diethyl phthalate (DEP), dibutyl phthalate (DBP), and DEHP. The results indicated that people in the seven Asian countries are exposed to DEP, DBP, and DEHP at levels well below the reference doses (RfD) suggested as unsafe by the U.S. Environmental Protection Agency (EPA). The estimated exposure doses to DEHP in Kuwait, however, were above the RfD recommended by the EPA.     

Generative regular-freeform surface recognition for generating material removal volume from stock model

The present paper illustrates the development of generative surface recognition for regular and freeform. To obtain the final form of product, material removal volume generation from a stock model is also discussed. Only a few studies integrated the regular and freeform surfaces to provide a comprehensive definition of surface recognition as well as for the volumetric estimation of removal material in finishing and roughing operations. The current research deploys a comprehensive surface recognition approach that can recognise both regular and freeform surfaces based on the geometry as well as loop entity of a face. In contrast to the regular surface that can be categorised into a particular group of geometrical shape, such as cylindrical shape, the proposed approach enables the recognition of a freeform surface that cannot be defined as a generic geometrical shape. In addition, the new method also simplifies the existing surface recognition for regular surfaces. The material removal volumes created consist of machining volumes for finishing and roughing operations needed to be machined to obtain the final form of the product. The present research provides a unique user customisation feature that enables user to specify the volumetric thickness for material removal volume in the finishing operation as well as the size for the stock model. These estimated volumes are prepared for subsequent manufacturing applications, such as sequencing of machining operation.     

Ethanol and lactic acid production using sap squeezed from old oil palm trunks felled for replanting

Old oil palm trunks that had been felled for replanting were found to contain large quantities of high glucose content sap. Notably, the sap in the inner part of the trunk accounted for more than 80% of the whole trunk weight. The glucose concentration of the sap from the inner part was 85.2 g/L and decreased towards the outer part. Other sugars found in relatively low concentrations were sucrose, fructose, galactose, xylose, and rhamnose. In addition, oil palm sap was found to be rich in various kinds of amino acids, organic acids, minerals and vitamins. Based on these findings, we fermented the sap to produce ethanol using the sake brewing yeast strain, Saccharomyces cerevisiae Kyokai no.7. Ethanol was produced from the sap without the addition of nutrients, at a comparable rate and yield to the reference fermentation on YPD medium with glucose as a carbon source. Likewise, we produced lactic acid, a promising material for bio-plastics, poly-lactate, from the sap using the homolactic acid bacterium Lactobacillus lactis ATCC19435. We confirmed that sugars contained in the sap were readily converted to lactic acid with almost the same efficiency as the reference fermentation on MSR medium with glucose as a substrate. These results indicate that oil palm trunks felled for replanting are a significant resource for the production of fuel ethanol and lactic acid in palm oil-producing countries such as Malaysia and Indonesia.     

Effect of pre‐germination time of brown rice on serum cholesterol levels of hypercholesterolaemic rats

BACKGROUND: Brown rice is unpolished rice with immeasurable benefits for human health. Brown rice (BR) and pre‐germinated brown rice (PGBR) are known to contain various functional compounds such as γ‐oryzanol, dietary fibre and γ‐aminobutyric acid (GABA). In the present study, the experimental diets containing BR and PGBR (24, 48 h pre‐germination) were used to investigate the influence of pre‐germination time of brown rice on blood cholesterol in Sprague–Dawley male rats. RESULTS: Hypercholesterolaemia and elevation of LDL‐cholesterol were successfully ameliorated by the experimental diets containing BR and PGBR (24 and 48 h pre‐germination). As compared to the control sample, the pre‐germination time had a significant (P < 0.05) effect on blood cholesterol of Sprague–Dawley male rats. It was also found that the significantly (P < 0.05) better effect on lipid profile of hypercholesterolaemic rats was observed by prolonging the pre‐germination time. As compared to non‐germinated brown rice, the germinated brown rice showed the higher cardio‐protective effect on hypercholesterolaemic Sprague–Dawley male rats. CONCLUSION: The present study suggests that the changes of blood cholesterol can be mainly modulated by using the PGBR rather than BR. The prolonging of pre‐germination time led to an increase in the bioactive components, thereby providing a more efficient functional diet affecting the high blood cholesterol. This study suggests that PGBR can be used instead of BR and polished rice in the human diet. Copyright © 2009 Society of Chemical Industry     

Physicochemical stability of antilisterial proteins from P. polymyxa Kp10 as potential food biopreservative

Listeria monocytogenes has continuously become a significant threat to consumers worldwide. The use of chemical-derived preservatives that are commonly associated with safety and nutritional issues has prompted the use of natural-based preservatives as a better alternative. Many bacterial strains including Paenibacillus polymyxa Kp10 have been reported to produce various antimicrobial proteins and compounds that are considered more natural. However, their stability in various physicochemical conditions should be examined before being applied in various types of food. In this study, the stability of four previously identified antilisterial proteins in P. polymyxa Kp10 upon exposure to several physicochemical conditions was examined. More than 80% residual antilisterial activity is conserved upon heat and proteinase K treatment. But, sensitivity to 24 h trypsin digestion has been observed. P1 and P2 proteins (histone-like DNA binding proteins HU) were sensitive to alkaline pH (pH 10-12) as compared with other proteins. More than 70% and 97% residual antilisterial activity were recovered after incubation in raw beef homogenates and simulated meat gravy model, respectively. However, the antilisterial activity of most proteins was highly compromised in chicken and salmon meat homogenates, and UHT cow milk. Inoculation of these proteins into Listeria-contaminated simulated meat gravy showed that all proteins exerted a bactericidal action against L. monocytogenes. P1 and P2 shared almost similar antilisterial activity rates, while P4 was the most potent antilisterial protein. The findings in this study could provide important preliminary data for future applications of these proteins as preservative in food products especially beef-based meat products.