3D Visualization of Morphological Evolution of Large Defects during Spark Plasma Sintering of Alumina Granules

The mechanical reliability of products must be assured for scaling up and production of complex-shaped components by spark plasma sintering (SPS) of spray-dried granules. The evolution of morphologies of pores and defects, which control the mechanical strength, is investigated by using synchrotron X-ray multiscale tomography during SPS of alumina granules at 1300 °C. While large defects arising from the hierarchical granule packing structure cannot be removed by pressureless sintering, crack-like defects and branched rodlike defects are almost eliminated by SPS at stresses higher than 30 and 50 MPa, respectively. But, small ellipsoidal porous regions, which may arise from aggregates or dimples of granules, cannot be removed even at a pressure of 50 MPa. A very large defect is also found by using micro-CT. It is supposed that this defect is formed from a large void in loosely packed granules. The shrinkage of large voids and the elimination of crack-like defects are explained by the theoretical prediction based on the continuum theory of sintering.     

Oxidation behavior of ytterbium silicide

Si-rich ytterbium silicide was fabricated by through an arc-melting technique for applying use as a bond coat material in an environmental barrier coating system. Evaluation of its potential was accomplished through oxidation tests in dry air and an inert atmosphere. The experimental results showed that the changes in weight and morphologies of ytterbium silicide observed after the tests depended on the oxygen partial pressure. Extensive oxidation and weight gain occurred after oxidation in air. In order to apply this material for hot structures, improvement of the oxidation resistance is needed.     

Influence of tungsten–carbon mixed layer and irradiation defects on deuterium retention behavior in tungsten

The D₂⁺ fluence dependence on deuterium (D) retention was studied to clarify the D retention mechanism in tungsten. The additional D desorption stage was observed around 660 K in the TDS spectrum for a sample implanted with D₂⁺ up to the fluence of 10²³ D⁺ m^?2, which desorption stage was not observed the D₂⁺ implanted sample with the fluence less than 10²² D⁺ m^?2. The TEM observation showed that the highly dense voids were formed in tungsten by D₂⁺ implantation with the fluence of 10²³ D⁺ m^?2, considering that the D would be trapped by voids. To understand the D trapping by voids in C⁺ implanted tungsten, C⁺–D₂⁺ sequential implantation experiments at various C⁺ implantation temperatures were performed. It was found that the amount of D desorbed around 560 K was increased by increasing the C⁺ implantation temperature. The formation of the voids was observed with increasing the C⁺ implantation temperature by TEM, indicating that the increase of D desorption around 560 K was caused by the formation of voids. However, the desorption temperature of D trapped by voids in C⁺ implanted sample was lower than that in D₂⁺ implanted one. TEM observation and XPS measurement indicated that this difference was caused by the increase of void size and/or the presence of implanted carbon.     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Methodology to optimize radiation protection in radioactive waste disposal after closure of a disposal facility based on probabilistic approach

We propose a methodology to optimize radiation protection in radioactive waste disposal after the closure of a disposal facility based on a probabilistic approach. In this methodology, a set of alternative options of the disposal system design with the associated uncertainties estimated through a probabilistic approach are developed. Then, the methodology evaluates the advantages and disadvantages of each option for the optimization of radiation protection, in which it is possible to determine the compliance with a dose constraint of 0.3 mSv/y and to collect information for making a decision on the optimization. In particular, the obtained information on the exposure, which is the mode and width of the dose distribution, can be converted into information on engineering measures and site conditions for the options. This process allows us to discuss which option should be selected as the optimal option by considering the balance between the exposure and the engineering, economic, and social feasibility of the option. This methodology is helpful for providing clear reasons why an optimal disposal system design is selected by combining quantitative information on the exposure and the feasibility of each option.     

Continuous electric resistance heating—Hot forming system for high-alloy metals with poor workability

A new hot forming system for high-alloy metals with poor workability is developed. This forming system is a direct combination of a forming machine and continuous electric resistance heating, and is capable of the high-speed forming of metals with flexible and precise control of elevated temperature. The prototype of the new forming system is applied to the forming of high-alloy metals with poor formability, such as a Ti–6Al–4V bar, and the basic characteristics of this forming system are clarified. Using this system, sound, high speed forming of high alloys becomes possible, and the Ti–6Al–4V bar is successfully formed without fracture.     

Short‐current pulse‐based adaptive maximum‐power‐point tracking for a photovoltaic power generation system

This paper focuses on a maximum‐power‐point tracking method of photovoltaics via use of the short‐current pulse. It has been reported that the optimum operating current is proportional to the short current and that maximum‐power‐point tracking can be performed by detecting the short current. The proposed method utilizes the intermittent short‐current pulse to estimate the optimum operating current and its operating characteristics have experimentally been verified. Also, an adaptive mechanism to identify the parameter between the optimum current and the short current is discussed. A prototype of the controller has been set up and the experimental results have demonstrated excellent performance, proving the feasibility of the system. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 65–72, 2002; DOI 10.1002/eej.1147     

GH-16 Type β-1,3-Glucanase from Lysobacter sp. MK9-1 Enhances Antifungal Activity of GH-19 Type Chitinase,and Its Glucan-binding Domain Binds to Fungal Cell-wall

The GH-16 type β-1,3-glucanase (BgluC16MK) gene of Lysobacter sp. MK9-1 was cloned to study its antifungal activities. BgluC16MK displays amino acid sequence similarity with GluC from L. enzymogenes strain N4-7. BgluC16MK includes a signal sequence, a catalytic domain and carbohydrate-binding module family 6-type β-glucan binding domain (B-GBD). The expression of the BgluC16MK gene in Escherichia coli without the signal sequence resulted in antifungal activity at a dose of 0.6-0.8 nmol/disk. However, BgluC16MK displayed antifungal activity at a dose of 0.025 nmol/disk in combination with Chi19MK. Substrate-specific assay revealed that purified BgluC16MK hydrolyzed insoluble curdlan more readily than the soluble substrate. Furthermore, to explore the binding selectivity of B-GBD of BgluC16MK, we constructed a fusion protein (B-GBD-GFP) using the B-GBD and green fluorescent protein. The activity of the fusion protein against various substrates indicates that B-GBD was selective for glucans with β-1,3-linkages. An additional study demonstrated the binding ability of B-GBD-GFP to the cell-wall of living fungi, such as T. reesei and Aspergillus oryzae. These findings suggest that BgluC16MK can be utilized to generate antifungal enzyme preparations and that the fusion protein B-GBD-GFP can be used to identify the fungal cell surface structure using β-glucans.     

Near-Infrared Imaging of Steroid Hormone Activities Using Bright BRET Templates

Bioluminescence (BL) is an excellent optical readout for bioassays and molecular imaging. Herein, we accomplished new near infrared bioluminescence resonance energy transfer (NIR-BRET) templates for monitoring molecular events in cells with higher sensitivity. We first identified the best resonance energy donor for the NIR-BRET templates through the characterization of many coelenterazine (CTZ)–marine luciferase combinations. As a result, we found that NLuc–DBlueC and ALuc47–nCTZ combinations showed luminescence in the blue emission wavelength with excellent BL intensity and stability, for example, the NLuc–DBlueC and ALuc47–nCTZ combinations were 17-fold and 22-fold brighter than their second highest combinations, respectively, and were stably bright in living mammalian cells for at least 10 min. To harness the excellent BL properties to the NIR-BRET systems, NLuc and ALuc47 were genetically fused to fluorescent proteins (FPs), allowing large “blue-to-red” shifts, such as LSSmChe, LSSmKate2, and LSSmNep (where LSS means Large Stokes Shift). The excellent LSSmNep–NLuc combination showed approximately 170 nm large resonance energy shift from blue to red. The established templates were further utilized in the development of new NIR-BRET systems for imaging steroid hormone activities by sandwiching the ligand-binding domain of a nuclear receptor (NR-LBD) between the luciferase and the FP of the template. The NIR-BRET systems showed a specific luminescence signal upon exposure to steroid hormones, such as androgen, estrogen, and cortisol. The present NIR-BRET templates are important additions for utilizing their advantageous imaging of various molecular events with high efficiency and brightness in physiological samples.