Computer Simulation of Axis-Encircling Beams Generated by an Electron Gun with a Permanent Magnet System

Results from computer aided design of a novel electron gun generating axis-encircling beams are presented and discussed. Numerical experiments were performed by the new version of the software package GUN-MIG named GUN-MIG/CUSP. It is based on a self-consistent relativistic model and is developed as a problem oriented tool for analysis of electron-optical systems with magnetron injection guns (MIG) and electron guns with field reversal (cusp guns), forming axis-encircling beams. As a result of the simulations an electron-optical design of a novel electron gun with permanent magnet system was accomplished. The gun is expected to form high quality beams with small velocity spread and beam ripple. Parameters of the generated beams are appropriate for a prospective weakly relativistic high harmonic large orbit gyrotron (LOG). The development of such device is in progress now at the Research Center for Development of Far-Infrared Region (FIR Center) at Fukui University.     

Application of the Gyrotron FU II Submillimeter Wave Radiation Source to Plasma Scattering Measurements

Gyrotron FU II has been successfully applied as a submillimeter wave radiation source to plasma scattering measurements on the Compact Helical System (CHS) in National Institute for Fusion Science (NIFS) in Japan. The gyrotron operates in a long pulse mode (the pulse width is about 600 ms) at a frequency of about 350 GHz (the corresponding wavelength is 0.85 mm). The output power is about 110 W. The output power is transmitted along a circular waveguide system and converted to a Gaussian-like beam by a quasi-optical antenna. After that, the beam is directed onto the CHS plasma and the scattered signal is detected by a homodyne detection system. The frequency and the wave number of the scattered signal are analyzed. The results suggest that a broad band low frequency (several tens to several hundreds kHz) density fluctuation is excited in the CHS plasma only during neutral beam injection (NBI) or ion cyclotron resonance (ICR) heating.     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.     

Synchronous mode-locking in passively mode-locked semiconductor laser diodes using optical short pulses repeated at subharmonics of the cavity round-trip frequency

Synchronous mode-locking was achieved in passively mode-locked semiconductor lasers using optical pulses with repetition rates at subharmonics of the cavity round-trip frequency. Stable and continuous mode-locked pulses at 8.5 GHz were generated when the repetition rate of the control optical pulses was 4.25 GHz (2nd subharmonic). The timing jitter of the mode-locked pulses was reduced to 1 ps. The relationship between repetition rates of the control pulses and the realization of stable and continuous mode-locking was examined.     

A modified power control scheme for remedying the effects of traffic nonuniformity in LEO satellite communications systems

It has been shown in our previous studies that the geographical traffic nonuniformity considerably affects the performance of the low earth orbit satellite communications systems. In this paper, a new scheme for improving the throughput characteristics of these systems at nonuniform traffic distribution is proposed. In this method, some parts of the users under the satellite which is flying over the area with high traffic load are assigned to its neighbor satellites with lower transmitting power levels. It is shown that the method equalizes the traffic loads of the satellites to some degree and, hence, can improve the throughput characteristics of the system.     

Generation of synchronized subterahertz optical pulse trains byrepetition-frequency multiplication of a subharmonic synchronousmode-locked semiconductor laser diode using fiber dispersion

We describe the generation of a synchronized, low-jitter, subterahertz optical pulse train by repetition-frequency multiplication of a subharmonic synchronous mode-locked semiconductor laser diode using the group-velocity dispersion (GVD) of optical fiber. A 49-196 GHz optical pulse train was generated with low intensity fluctuation and with low timing jitter, by adjusting fiber length in accordance with the mode-locking frequency and the fiber's GVD     

Novel design scheme for high-speed MQW lasers with enhanceddifferential gain and reduced carrier transport effect

We present a theoretical analysis exploring the optimum design of high-speed multiple-quantum-well (MQW) lasers for 1.55-μm operation. Various combinations of well and barrier materials are examined for lattice-matched, strained-layered (SL), and strain-compensated (SC) MQW lasers with InGaAsP and InGaAlAs barriers. The gain characteristics are investigated for these MQW lasers with various barrier bandgap wavelengths and are used to evaluate the modulation characteristics based on the carrier dynamics model which includes a set of Poisson, continuity, and rate equations. The importance of band engineering aimed at simultaneously reducing the carrier transport effect and enhancing the differential gain is described. It is shown that SC-MQW lasers with InGaAlAs barriers have an advantage in reducing the density of states in the valence band by reducing the overlap integral between the heavy- and light-hole wave functions, which effect has previously been discarded as a minor correction in designing conventional InGaAsP-based MQW lasers. Furthermore, the hole transport rate across the barriers can be drastically reduced in SC-MQW lasers due to the reduced effective barrier height for the holes. Based on this novel design scheme, a 3-dB bandwidth approaching 70 GHz is expected for 20-well SC-MQW lasers with InGaAlAs barriers as a result of both the large differential gain and reduced transport effect     

CW Operation of a Submillimeter Wave Gyrotron (Gyrotron Fu IV) for High Stability of the Output Frequency

The first cw operation of our submillimeter wave gyrotron (Gyrotron FU IV) using a 12 T superconducting magnet has been successfully carried out. Output power is more than 20 W at a frequency of 301 GHz in the TE₀₃₁ resonant cavity mode. Time-resolved frequency measurement s shows that the frequency fluctuation of the gyrotron output is smaller than 2 MHz. This frequency fluctuation is mainly due to the fluctuation in the output voltage of the power supply.     

A delay-encoding-logic array processor for dynamic-programming matching of data sequences

Computationally very expensive dynamic-programming matching of data sequences has been directly implemented in a fully-parallel-architecture VLSI chip. The circuit operates as digital logic in the signal domain, while analog processing is carried out in the time domain based on the delay-encoding-logic scheme. As a result, a high-speed low-power best-match-sequence search has been established with a small chip area. The typical matching time of 80 ns with the power dissipation of 2 mW has been demonstrated with fabricated prototype chips.