Mesophase structure discovered through in-situ X-ray measurement in drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) fiber

The structure development in the continuous laser-heated drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) fiber was analyzed by in-situ X-ray diffraction measurement. Because of the rapid and uniform laser heating, and the resultant steady-state nature of the necking-drawing, the structure development after the on-set of necking could be measured in the time resolution of several hundred microseconds. We found for the first time the temporal appearance of meridional (001′) diffraction at several milliseconds after the on-set of necking indicating that the mesophase structure similar to the one reported for poly(ethylene terephthalate) was also formed in the initial stage of fiber structure development of PEN. The d-spacing of the (001′) diffraction 1.230 ± 0.003 nm was shorter than the c-axis lengths of both α and β crystals.     

Measurement and calculation of neutron densities in BWR high burn-up fuels

A neutron-scanning device was developed for measuring accurate neutron densities of BWR high burn-up fuels up to 65 GWd tU⁻¹. Characteristic test of this device was done with a ²⁵²Cf source and adopted to measure axial distributions of neutron densities of BWR spent fuels with various enrichments (2.0–3.4%), which had been irradiated up to 60 GWd tU⁻¹ at Fukushima Daini Nuclear Power Station Unit 2(2F-2). We found the measured neutron densities were proportional to about fourth power of the corresponding burn-up values. The neutron densities calculated by the ORIGEN2.1 code and various cross section libraries showed good agreements with the measured ones in profile and absolute value except for BWR-UE file mainly based on ENDF/B-IV. The BS240J32 library based on JENDL3.2 was the best among the investigated libraries.     

A reflective‐display QR‐LPD®

Abstract— A novel reflective display [Quick‐Response Liquid Powder Display (QR‐LPD®)], has been developed. This paper‐like display has the advantages of outstanding image stability, easy viewing, low‐power consumption, and a high‐response time. QR‐LPD® will be promoted, initially, for use as electronic price‐tag displays for merchandise. In addition, QR‐LPD® is suitable for flexible display applications because it does not require TFT arrays or a high‐temperature process while maintaining an excellent paper‐like image as well as glass‐type display compatibility.     

An Experimental Study of a Cooperative Positioning System

Several position identification methods are being used for mobile robots. Dead reckoning is a popular method but due to the error accumulation from wheel slippage, its reliability is low for measurement of long distances especially on uneven surfaces. Another popular method is the landmark method, which estimates current position relative to known landmarks, but the landmark method's limitation is that it cannot be used in an uncharted environment. Thus, this paper proposes a new method called Cooperative Positioning System (CPS) that is able to overcome these shortcomings. The main concept of CPS is to divide the robots into two groups, A and B where group A remains stationary and acts as a landmark while group B moves and then group B stops and acts as a landmark for group A. This process is repeated until the target position is reached. Compared with dead reckoning, CPS has a far lower accumulation of positioning errors, and can also work in three dimensions. Furthermore, CPS employs inherent landmarks and therefore can be used in uncharted environments unlike the landmark method. In this paper, we introduce the basic concept of CPS and its positioning principle. Next, we outline a second prototype CPS machine model (CPS-II) and discuss the method of position estimation using the variance of positioning error and weighted least squares method. Position identification experiments using the CPS-II model give a positioning accuracy of 0.12% for position and 0.32 degree for attitude after the robots traveled a distance of 21.5 m.     

Viscoelastic properties of epoxy resins. II. Antiplasticization in highly crosslinked epoxy system

The effect of the addition of certain low molecular weight compounds to highly crosslinked epoxy resins was investigated. The behavior which is known as antiplasticization, such as increases in modulus and yield strength and the elimination of β-transition, was observed in the highly crosslinked system as well as in the reported cases of thermoplastics—poly(vinyl chloride), bisphenol A polycarbonate, and polysulfone. Chlorinated biphenyl was found to be one of the most effective antiplasticizers examined in the present paper. However, the remarkable reduction in compressive strain at break and impact strength was not recognized for the highly antiplasticized samples. These phenomena have been interpreted on the basis of free volume concept.     

Production of vitamin B12 in genetically engineered Propionibacterium freudenreichii

Since the chemical synthesis of vitamin B12 requires more than 70 steps, the production of vitamin B12 has been achieved by microorganism fermentation with additional brief chemical modifications. In an effort to increase the productivity of vitamin B12, we tried to express 10 genes belonging to the hem, cob and cbi gene families involved in the synthesis of vitamin B12 in Propionibacterium freudenreichii, which is a known producer of vitamin B12. In a recombinant P. freudenreichii clone that harbored the expression vector containing a cobA, cbiLF, or cbiEGH, we obtained an increase in vitamin B12 production of 1.7-, 1.9-, and 1.5-fold higher, respectively, than that in the microorganism without any cloned genes in the expression vector pPK705. The cobU and cobS genes caused a slight increase in the production of vitamin B12. Furthermore, we achieved multigene expression in P. freudenreichii. In a recombinant P. freudenreichii clone that harbored an exogenous gene, hemA, from Rhodobacter sphaeroides and endogenous hemB and cobA genes, we successfully achieved the production of about 1.7 mg/l vitamin B12, 2.2-fold higher than that produced by P. freudenreichii harboring pPK705.     

Possible 3He Boltzmann Gas Formed on Three-Dimensional Nanopores Preplated with 4He

We have measured the heat capacity of ³He adsorbed on three-dimensionally connected nanopores, 2.7 nm in diameter, preplated with about 1.3 atomic layers of ⁴He. At low coverages of ³He, the ³He heat capacity is roughly constant at the measured temperatures between 0.1 and 1 K. Its molar heat capacity is on the order of the gas constant R, between 1.1R and 1.8R. This suggests a Boltzmann gas state of the adsorbed ³He. At high coverages, the heat capacity is likely approaching linear in T at low temperatures, which suggests a degenerate state at further lower temperatures.     

Disintegration process of yttria-stabilized zirconia ceramics using hydrothermal conditions

Capability of the recycling of high strength and high fracture toughness yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) sintered body utilizing “low-temperature annealing degradation” phenomenon was investigated. Hydrothermal treatment was employed to induce the phase transformation from tetragonal to monoclinic zirconia and to disintegrate the Y-TZP sintered body. 3 mol% Y₂O₃–ZrO₂ specimens sintered at 1,550 °C and more were disintegrated without leaving the original appearances when the treatment temperature was between 200 °C and 400 °C. The size of the disintegrated fragments of Y-TZP sintered body was much affected by hydrothermal treatment conditions. Only with hydrothermal treatment and simple ball milling, the sintered body was pulverized into the primary particle level. This technique is expected to apply to a sustainable recycling system for the zirconia ceramics, which restrains an energy consumption compared to crushing zirconia using mechanical procedures.     

Color displays and flexible displays using quick‐response liquid‐powder technology for electronic paper

Abstract— Color displays and flexible displays that use electronic liquid powder have been developed. Novel types of color displays using either a colored powder or a color filter are discussed. We have also developed a flexible display with low‐cost substrate films with a high‐throughput roll‐to‐roll manufacturing method. These technologies enable a QR‐LPD to be widely used as an electronic‐paper display.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation