JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Influence of tungsten–carbon mixed layer and irradiation defects on deuterium retention behavior in tungsten

The D₂⁺ fluence dependence on deuterium (D) retention was studied to clarify the D retention mechanism in tungsten. The additional D desorption stage was observed around 660 K in the TDS spectrum for a sample implanted with D₂⁺ up to the fluence of 10²³ D⁺ m^?2, which desorption stage was not observed the D₂⁺ implanted sample with the fluence less than 10²² D⁺ m^?2. The TEM observation showed that the highly dense voids were formed in tungsten by D₂⁺ implantation with the fluence of 10²³ D⁺ m^?2, considering that the D would be trapped by voids. To understand the D trapping by voids in C⁺ implanted tungsten, C⁺–D₂⁺ sequential implantation experiments at various C⁺ implantation temperatures were performed. It was found that the amount of D desorbed around 560 K was increased by increasing the C⁺ implantation temperature. The formation of the voids was observed with increasing the C⁺ implantation temperature by TEM, indicating that the increase of D desorption around 560 K was caused by the formation of voids. However, the desorption temperature of D trapped by voids in C⁺ implanted sample was lower than that in D₂⁺ implanted one. TEM observation and XPS measurement indicated that this difference was caused by the increase of void size and/or the presence of implanted carbon.     

Selection of a pull production control system in multi-stage production processes

In this paper, we conduct an analytical comparison of three pull production control systems: Kanban, CONWIP and Base-stock in multi-stage production processes. First, we compare the three control systems in a multi-stage serial production process. Then, we compare them in multi-stage assembly production processes, and present guidelines that allow us to select the best system. As a result, we show which structural parameters decide the superiority of one control scheme to the others, and how they are related. A key for superiority is a configuration of parameters, such as processing times and number of cards employed in the system. We show that there is no general superiority amongst the analysed concepts. Finally, we verify the effect of variability on the system performance, and generalise the analytical results of deterministic cases by conducting numerical experiments.     

Direct synthesis of H2O2 acid solutions on carbon cathode prepared from activated carbon and vapor-growing-carbon-fiber by a H2/O2 fuel cell

Direct synthesis of H₂O₂ acid solutions was studied using a gas-diffusion cathode prepared from activated carbon (AC), vapor-growing-carbon-fiber (VGCF) and poly-tetra-fluoro-ethylene (PTFE) powders, with a new H₂/O₂ fuel cell reactor. O₂ reduction to H₂O₂ was remarkably enhanced at the three-phase boundary (O₂(g)-electrode(s)-acid(l)) at the [AC + VGCF] cathode. Fast diffusion processes of O₂ to the active surface and of H₂O₂ to the bulk acid solutions were essential for H₂O₂ accumulation. Synergy of AC and VGCF was observed for the H₂O₂ formation. RRDE and cyclic voltammetry studies indicated that the surface of AC functioned as the active phase for O₂ reduction to HO₂, and VGCF functioned as an electron conductor and a promoter to convert HO₂ to H₂O₂. A maximum H₂O₂ concentration of 353 mM (1.2 wt%) was accomplished under short-circuit conditions (current density 12.7 mA cm⁻², current efficiency 40.1%, geometric area of cathode 1.3 cm², reaction time 6 h).     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Reduction of force interference and performance improvement of a consequent-pole bearingless motor

A bearingless motor combines the functions of both magnetic suspension and torque generation together in a single motor. A consequent-pole type of bearingless motor has already been proposed. In contrast to conventional bearingless motors, it is free from the trade-off between suspension force and torque. In addition, stable suspension can be achieved without detecting the rotational angle. However, a part of the X-axis current generates undesirable force in the Y-axis. This force interference influences the performances of bearingless motors; thus, the interference should be eliminated. In this paper, the authors propose an optimal winding design of the consequent-pole bearingless motor to minimize the suspension force interference. Here, the suspension forces in the radial direction are numerically calculated using the magneto-motive force distribution of the bearingless motor, and are compared with the analytical results of finite element method. To verify the theory, static and dynamic performance tests were carried out. It was found that the improved winding configuration significantly reduced the suspension force interference by 90% compared with the previous winding configuration. It was also found that the radial shaft vibration and the power consumption were considerably decreased, by approximately 16% and 44%, respectively.     

Molecular mechanisms of epigenetic variation in plants

Natural variation is defined as the phenotypic variation caused by spontaneous mutations. In general, mutations are associated with changes of nucleotide sequence, and many mutations in genes that can cause changes in plant development have been identified. Epigenetic change, which does not involve alteration to the nucleotide sequence, can also cause changes in gene activity by changing the structure of chromatin through DNA methylation or histone modifications. Now there is evidence based on induced or spontaneous mutants that epigenetic changes can cause altering plant phenotypes. Epigenetic changes have occurred frequently in plants, and some are heritable or metastable causing variation in epigenetic status within or between species. Therefore, heritable epigenetic variation as well as genetic variation has the potential to drive natural variation.     

Effects of administration of Bifidobacterium animalis subsp. lactis GCL2505 on defecation frequency and bifidobacterial microbiota composition in humans

The aim of this study was to evaluate the changes in endogenous bifidobacteria and administered Bifidobacterium animalis subsp. lactis (B. lactis) GCL2505 (GCL2505) in the intestine after administration of GCL2505 by means of a randomized, placebo-controlled double-blind, cross-over study. An increase in the number of total bifidobacteria (the sum of B. bifidum, B. breve, B. longum subsp. longum, B. adolescentis, B. anglatum, B. catenulatum, B. pseudocatenulatum, B. dentium, B. longum subsp. infantis and B. lactis) in the feces were observed after administration of GCL2505 using species- and subspecies-specific real-time polymerase chain reaction analysis. However, the number of endogenous bifidobacteria species (excluding B. lactis) remained unchanged. B. lactis also became the predominant bifidobacterial species. Taking into account the number of GCL2505 administered, the findings further suggested that GCL2505 proliferated in the intestine. In addition, the defecation frequency increased during GCL2505 administration compared with the placebo. Moreover, a single administration study (n=17) clearly demonstrated that GCL2505 successfully reached the intestine before proliferating at least 10-fold. This is the first report to show an increase in intestinal bifidobacteria, with no changes to the endogenous species, and improvements in constipation following proliferation of administered bifidobacteria.     

Large-scale genome reorganization in Saccharomyces cerevisiae through combinatorial loss of mini-chromosomes

A highly efficient technique, termed PCR-mediated chromosome splitting (PCS), was used to create cells containing a variety of genomic constitutions in a haploid strain of Saccharomyces cerevisiae. Using PCS, we constructed two haploid strains, ZN92 and SH6484, that carry multiple mini-chromosomes. In strain ZN92, chromosomes IV and XI were split into 16 derivative chromosomes, seven of which had no known essential genes. Strain SH6484 was constructed to have 14 mini-chromosomes carrying only non-essential genes by splitting chromosomes I, II, III, VIII, XI, XIII, XIV, XV, and XVI. Both strains were cultured under defined nutrient conditions and analyzed for combinatorial loss of mini-chromosomes. During culture, cells with various combinations of mini-chromosomes arose, indicating that genomic reorganization could be achieved by splitting chromosomes to generate mini-chromosomes followed by their combinatorial loss. We found that although non-essential mini-chromosomes were lost in various combinations in ZN92, one mini-chromosome (18kb) that harbored 12 genes was not lost. This finding suggests that the loss of some combination of these 12 non-essential genes might result in synthetic lethality. We also found examples of genome-wide amplifications induced by mini-chromosome loss. In SH6484, the mitochondrial genome, as well as the copy number of genomic regions not contained in the mini-chromosomes, was specifically amplified. We conclude that PCS allows for genomic reorganization, in terms of both combinations of mini-chromosomes and gene dosage, and we suggest that PCS could be useful for the efficient production of desired compounds by generating yeast strains with optimized genomic constitutions.