Cerebral revascularization by omental free flap using contralateral superficial temporal vessels as recipient vessels: case report

BACKGROUND: Although the most common technique of cerebral revascularization is superficial temporal artery to middle cerebral artery bypass, we occasionally encounter a situation in which the ipsilateral superficial temporal artery is not available. Treatment may require several techniques including long vein graft bypass. METHODS: A 54-year-old man experienced transient ischemic attacks, and cerebral angiography revealed occlusion of the right common carotid artery. Cerebral blood flow study revealed reduced perfusion reserve capacity of the right cerebral hemisphere. We applied an omental free flap to the brain surface using the contralateral superficial temporal vessels as recipient vessels. RESULTS: Cerebral blood flow study revealed improvement of perfusion reserve capacity. Cerebral angiography revealed good collateral circulation from the omentum to the brain. The patient has not experienced a transient ischemic attack, following additional ligation of the occipital artery 13 months after the first operation. CONCLUSIONS: Because an omental flap has a long pedicle and its circulation can be monitored easily, this method is safe and as effective as a long bypass graft in a patient such as ours in whom the ipsilateral superficial temporal artery is not available for anastomoses.     

Inhibition of xanthine oxidase activity by an oxathiolanone derivative of quercetin

An oxathiolanone derivative of rutin could be produced in the stomach after the ingestion of rutin containing foods, and the oxathiolanone derivative could be hydrolysed to an oxathiolanone derivative of quercetin (quercetin-oxathiolanone) in the intestine. Quercetin-oxathiolanone as well as quercetin inhibited xanthine oxidase. Approximately 0.05 μM quercetin-oxathiolanone inhibited the activity by 50%, whereas 50% inhibition by quercetin was observed at approximately 0.4 μM. The results suggested that quercetin-oxathiolanone can be used as an effective inhibitor of xanthine oxidase and that the ingestion of rutin-rich foods may be useful to prevent the increase in the blood concentration of uric acid.     

Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Ash deposition behavior of upgraded brown coal in pulverized coal combustion boiler

Ash with a low melting point causes slagging and fouling problems in pulverized coal combustion boilers. Ash deposition on heat exchanger tubes reduces the overall heat transfer coefficient due to its low thermal conductivity. The purpose of this study is to evaluate the ash deposition for Upgraded Brown Coal (UBC) and bituminous coal in a 145 MW practical coal combustion boiler. The UBC stands for Upgraded Brown Coal. The melting temperature of UBC ash is relatively lower than that of bituminous coal ashes. Combustion tests were conducted on blended coal consisting 20 wt.% of UBC and 80 wt.% of bituminous coal. Before actual ash deposition tests, the molten slag fractions in those coal ashes were estimated by means of chemical equilibrium calculations. The calculation results showed the molten slag fraction for UBC ash reached approximately 90% at 1523 K. However, that for blended coal ash decreased to 50%. These calculation results mean that blending UBC with bituminous coal played a role in decreasing the molten slag fraction. This phenomenon occurred because the coal blending led to the formation of alumino-silicates compounds as a solid phase. Next, ash deposition tests were conducted using a practical pulverized coal combustion boiler. A water-cooled stainless-steel tube was inserted in locations at both 1523 K and 1273 K in the boiler to measure the amount of ash deposits. The results showed that the mass of ash deposition for blended coal did not greatly increase, compared with that for bituminous coal alone. Therefore, appropriately blending UBC with bituminous coal enabled the use of UBC without any ash deposition problems in practical boilers.     

Preparation of surfactant-free vinyl polymers by conventional emulsion polymerization using hydrolysable emulsifiers

Emulsion polymerizations of several vinyl monomers, styrene, methyl methacrylate, butyl methacrylate, butyl acrylate, and vinyl acetate, in water using alkali–hydrolysable cationic surfactants with a betaine ester group (1-alkoxycarbonylmethyl)trimethylammonium chlorides, as emulsifiers were carried out and properties of the resulting latices and the polymers recovered by hydrolysis and salting out were investigated. There were little influences of the surfactants and monomers used here on the polymerizations, forming stable and monodisperse latices with a mean diameter of ca. 70 nm and giving a high molecular weight of polymers at high yields. All polymers were precipitated and recovered by adding a small amount of sodium hydroxide into the latex solutions contained little amount of ionic species. Solvent-cast films of the polymers were found to have surfaces as hydrophobic as those for the corresponding pure polymers prepared by bulk polymerization.     

Antibacterial effect of thiocyanate substituted poly(vinyl chloride)

Poly(vinyl chloride) (PVC) modified in different solvents by nucleophilic substitution with thiocyanate was exposed to Gram-negative bacteria of the strain Staphylococcus capitis. All modified pieces reduced the adhesion of bacteria by between 67 and 79%. More important for the bacteria suppression than the substitution rate was the ratio between thiocyanate and isothiocyanate groups. The best result was obtained with PVC modified in tetrahydrofuran/dimethylsulfoxide, containing only antibacterial active isothiocyanate groups, while inactive thiocyanate groups were absent.     

Limiting flux in microfiltration of colloidal suspensions by focusing on hydrodynamic forces in viscous sublayer

Cross‐flow microfiltration tests were performed on colloidal suspensions under turbulence conditions. By changing the particle diameter, flow rate, and channel height in the membrane housing to measure limiting fluxes, the influence of each parameter on the limiting flux was assessed from the viewpoint of hydrodynamic forces exerted on a particle in the viscous sublayer. In analyzing all the data taken, the particle Reynolds number calculated from the limiting flux is proportional to the 1.5 power of that calculated from the flow rate at the boundary between the viscous sublayer and the intermediate layer. This fact indicates that the limiting flux can be determined in situations where the drag force exerted by the flux is balanced by the lift force in the viscous sublayer. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1760–1765, 2018     

Decomposition kinetics and recycle of binary hydrogen‐tetrahydrofuran clathrate hydrate

Decomposition kinetics and recycle of hydrogen–tetrahydrofuran (H₂–THF) clathrate hydrates were investigated with a pressure decay method at temperatures from 265.1 to 273.2 K, at initial pressures from 3.1 to 8.0 MPa, and at stoichiometric THF hydrate concentrations for particle sizes between 250 and 1000 μm. The decomposition was modeled as a two‐step process consisting of H₂ diffusion in the hydrate phase and desorption from the hydrate cage. The adsorption process occurred at roughly two to three times faster than the desorption process, whereas the diffusion process during formation was slightly higher (ca. 20%) than that during decomposition. Successive formation and decomposition cycles showed that occupancy seemed to decrease only slightly with cycling and that there were no large changes in hydrate structure due to cycling. Results provide evidence that the formation and decomposition of H₂ clathrate hydrates occur reversibly and that H₂ clathrate hydrates can be recycled with pressure. © 2010 American Institute of Chemical Engineers AIChE J, 2011