Control strategy for a distributed DC power system with renewable energy

This paper deals with a DC-micro-grid with renewable energy. The proposed method is composed of a gearless wind power generation system, a battery, and DC loads in a DC distribution system. The battery helps to avoid the DC over-voltages by absorbing the power of the permanent magnet synchronous generator (PMSG) during line-fault. In addition, the control schemes presented in this paper including the maximum power point tracking (MPPT) control and a pitch angle control for the gearless wind turbine generator. By means of the proposed method, high-reliable power can be supplied to the DC distribution system during the line-fault and stable power supply from the PMSG can be achieved after line-fault clearing. The effectiveness of the proposed method is examined in a MATLAB/Simulink^® environment.     

On-off switching properties of one-dimensional photonic crystals consisting of azo-functionalized polymer liquid crystals having different methylene spacers and polyvinyl alcohol

In this paper, photoresponsive behavior of multi-bilayered films having precisely controlled layer thickness prepared by stacking an azo-functionalized polymer liquid crystal, PMAzXAc, and polyvinyl alcohol alternatively, PVA, is described. The multi-bilayered films were found to reflect a light of specific wavelength depending on the layer thickness and refractive index, and showed the reversible change in the reflection intensity by irradiation with visible and UV lights. The change in the reflection intensity was brought about by change in the molecular orientation of PMAzXAc between an out-of-plane orientation and a photo-induced isotropic state, and was strongly dependent on the number of methylene spacer of PMAzXAc linking the azobenzene side group with the acrylate polymer main chain. PMAz6Ac with hexa-methylene spacer showed the largest change in the reflection intensity, while smaller change in the reflection intensity was observed for PMAzXAc having shorter or longer methylene spacer than 6. The effect of the methylene spacers on the photochemical change in the molecular orientation of azobenzene chromophores in the multi-bilayered films will be discussed.     

Combinatorial Measurement of CDKN1A/p21 and KIF20A Expression for Discrimination of DNA Damage-Induced Clastogenicity

In vitro mammalian cytogenetic tests detect chromosomal aberrations and are used for testing the genotoxicity of compounds. This study aimed to identify a supportive genomic biomarker could minimize the risk of misjudgments and aid appropriate decision making in genotoxicity testing. Human lymphoblastoid TK6 cells were treated with each of six DNA damage-inducing genotoxins (clastogens) or two genotoxins that do not cause DNA damage. Cells were exposed to each compound for 4 h, and gene expression was comprehensively examined using Affymetrix U133A microarrays. Toxicogenomic analysis revealed characteristic alterations in the expression of genes included in cyclin-dependent kinase inhibitor 1A (CDKN1A/p21)-centered network. The majority of genes included in this network were upregulated on treatment with DNA damage-inducing clastogens. The network, however, also included kinesin family member 20A (KIF20A) downregulated by treatment with all the DNA damage-inducing clastogens. Downregulation of KIF20A expression was successfully confirmed using additional DNA damage-inducing clastogens. Our analysis also demonstrated that nucleic acid constituents falsely downregulated the expression of KIF20A, possibly via p16 activation, independently of the CDKN1A signaling pathway. Our results indicate the potential of KIF20A as a supportive biomarker for clastogenicity judgment and possible mechanisms involved in KIF20A downregulation in DNA damage and non-DNA damage signaling networks.     

Output power dispatch control for a wind farm in a small power system

Nowadays, a wind turbine generator (WTG) is required to provide control capabilities as the output power of WTG fluctuates. Under this scenario, this paper proposes an output power control method of a wind farm (WF) connected to a small power system using pitch angle control. In this control approach, the WF output power control is achieved by two control levels: central and local. In the central control, the WF output power command is determined by considering the frequency deviations and wind speeds using a fuzzy function. Then, the local output power commands for each of the WTGs are based on the proposed dispatch control. In the proposed dispatch control, the output commands of each WTG are determined by considering wind conditions for each of the WTGs. The simulation results by using an actual detailed model for the wind power system show the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Track structure for low energy ions including charge exchange processes

The model and development is described of a new generation of Monte Carlo track structure codes. The code LEPHIST simulates full slowing down of low-energy proton history tracks in the range 1 keV-1 MeV and the code LEAHIST simulates low-energy alpha particle history tracks in the range 1 keV-8 MeV in water. All primary ion interactions are followed down to 1 keV and all electrons to 1 eV. Tracks of secondary electrons ejected by ions were traced using the electron code KURBUC. Microdosimetric parameters derived by analysis of generated tracks are presented.     

Elimination of artifacts in MRCP: technical consideration

Artifacts of MR cholangiopancreatography (MRCP) include fluid-filled gastrointestinal tracts, respiratory motion artifacts, spasm of Oddi's sphincter, vascular compression of bile ducts, overlapping of various anatomical structures and bright signal of surrounding fatty tissue. In this article, various technical considerations to eliminate these artifacts were described for the better imaging analysis of MRCP. The use of high-concentration ferric ammonium citrate (Ferriseltz) is recommended to reduce bright signal of fluid-filled gastrointestinal tracts. In case of long breathhold sequences, O2-inhalation study is useful to eliminate respiratory motion artifacts. Careful attention should be paid to the spasm of Oddi's sphincter and the vascular compression of bile ducts to avoid erroneous interpretation of MRCP findings.     

Preparation of carbon microparticle assemblies from phenolic resin using an inverse opal templating method

Three-dimensionally (3D) well-ordered carbon microparticle assemblies with different particle morphologies were fabricated by infiltration of phenolic resin solution into SiO₂ inverse opal structures and subsequent carbonization. The effect of the phenolic resin solution concentration and the carbonization temperature on the morphology of the fabricated carbon microparticles was investigated. At a carbonization temperature of 1000 °C, carbon microparticles with interlocked bridges were obtained when the concentration of phenolic resin solution is 40 wt% and hollow carbon microparticles with opened window channels were obtained at a concentration of 30–35 wt%. When the carbonization temperature was decreased to 500 °C, carbon microparticles with interlocked bridges also were observed, even when the phenolic resin concentration was 30 wt%. The structures and properties of the carbon microparticles and their assemblies were characterized using SEM, XRD, and N₂ adsorption.     

Dielectric properties above the glass transition for a series of epoxide prepolymers

Dielectric properties above the glass transition have been investigated for a series of bisphenol-A type epoxide prepolymers (388 ≤ M?_w ≤ 2640). Dielectric measurements were performed over a frequency range of 50 Hz–1 MHz using a vertical parallel plate cell which was constructed in the laboratory. The dielectric α-relaxation for each prepolymer fits the empirical model of the Havriliak–Negami equation. The temperature dependence of the dielectric relaxation time τ is described by the Williams–Landel–Ferry (WLF) equation as well as that of the direct current conductivity σ, which can be measured using the same cell. The relationship between τ and σ, σ^· τ^m = const, is derived from experimental results. The exponent m, which depends on the molecular weight of the prepolymer, is considered to correspond to the ratio of the segmental mobility to ionic mobility. The dielectric loss ε″ can be used as an indicator of the direct current conduction in the temperatures where the ionic component in ε″ becomes much larger than the dipole one.