A wind-tunnel study on exhaust gas dispersion from road vehicles—Part I: Velocity and concentration fields behind single vehicles

By a reduced-scale model in a wind tunnel, we investigate the dispersion behavior of exhaust gas from automobiles. Two types of vehicles are considered, a passenger car and a small-size truck. Tracer gas experiments show that the exhaust gas dispersion is enhanced significantly by the vehicle wake compared to the case when the vehicle body is absent. The passenger car and the truck promote dispersion in the horizontal and the vertical direction, respectively. The wake field is analyzed by particle image velocimetry (PIV), and the distribution of the mean and the fluctuation fields is found to conform to the concentration field of the exhaust gas. The buoyancy of the exhaust gas has minor effect except on the vertical spread behind the truck whose wake flow amplifies the vertical displacement generated near the pipe exit.     

Single-Component Pheromone Consisting of Bombykal in a Diurnal Hawk Moth, <Emphasis Type="Italic">Neogurelca himachala sangaica</Emphasis>

Recent work has suggested that hawk moths share pheromone components but are sexually separated by qualitative and quantitative differences in their pheromone blends. During field assays on the sex pheromones of other species, a diurnal hawk moth, Neogurelca himachala sangaica (Lepidoptera: Sphingidae), was frequently captured, but the composition of the sex pheromone of this species was not known. Analysis of hexane extracts of the pheromone glands of calling female by gas chromatography (GC) using an electroantennographic detector (EAD) revealed two components that elicited EAD responses from male moth antennae. These components were identified by their mass spectra and retention indices on two GC columns as (10E,12Z)-10,12-hexadecadienal (E10,Z12–16:Ald) and a trace of its (10E,12E)-isomer (E10,E12–16:Ald) in 98:2 ratio. In field experiments, E10,Z12–16:Ald alone attracted male moths, and addition of E10,E12–16:Ald significantly reduced the attractiveness, even at the naturally-occurring ratio. Analysis of the data using a generalized linear mixed model showed that E10,Z12–16:Ald positively contributed to attractiveness, whereas E10,E12–16:Ald did so negatively, and it was concluded that the sex pheromone of N. himachala sangaica consists solely of E10,Z12–16:Ald, bombykal. The negative effect of E10,E12–16:Ald on attractiveness could promote the species-specificity of this single-component pheromone system.     

Determination of correlations to predict the minimum agitation speed for complete solid suspension in agitated vessels

Experiments were conducted to determine the effects of impeller clearance, impeller diameter, and other operating variables on the minimum agitation speed for off-bottom solid suspension in agitated vessels, N_js, for disc turbines (DTs) and flat-blade turbines (FBTs). Only data for which the impellers produced recirculation flows above and below the impeller (the so-called “double-eight” flow pattern) were considered. Regression equations for N_js were obtained, in which explicit terms for impeller clearance and vessel diameter-to-impeller diameter ratio (T/D) were included. Modified Zwietering equations (Zwietering, 1958) were also obtained, in which Zwietering's parameter S was mathematically expressed as a function of vessel diameter-to-impeller clearance ratio and T/D ratio. When used together with the correlations of Armenante and Uehara Nagamine (1998) for impellers close to the vessel bottom, the equations presented here can be used to calculate N_js for DTs and FBTs for any typical impeller clearance.     

Synthesis of poly(phenylene oxide) — aromatic polyester multiblock copolymers

Summary Poly(phenylene oxide) (PPO) — aromatic polyester multiblock copolymers were synthesized by polycondensation of bisphenol-A / isophthalic acid or m- and p-hydroxybenzoic acids in the presence of PPO having a carboxylic acid at one end and a phenolic hydroxy group at the other using triphenylphosphine / hexachloroethane as coupling agent. TG analysis showed that the multiblock copolymer showed relatively high thermal stability. Received: 5 January 1998/Accepted: 4 February 1998     

A framework for constructing databases for supervisory control systems

This paper presents a framework for constructing databases for supervisory control systems. The proposed framework utilizes a generation-based approach and object-oriented framework libraries. In this framework, a database is designed for the target system from a design template, and the software for the database system is generated from the database design. The generated database system includes a domain-specific object system and a diagram and plant data editor, which provides effective data input functions. © 1998 Scripta Technica, Electr Eng Jpn, 123(1): 32–42, 1998     

Slab optical waveguide high-acidity sensor based on an absorbance change of protoporphyrin IX

A sensitive and fast-responsive evanescent wave absorption sensor has been constructed for pH measurements in highly acidic ranges. This sensor is based on a pH-dependent color change of protoporphyrin IX (PPIX). For the sensitive detection, a visible attenuated total reflection spectrometer with a slab optical waveguide (SOWG) was laboratory-made, and the guiding layer surface was modified with a PPIX-immobilized acrylamide-based thin membrane. The sensing membrane with a thickness of approximately 1 mum was directly fabricated on the SOWG glass surface by copolymerization of acrylamide, N,N'-methylene bisacrylamide, and PPIX in the narrow space confined by a cover plate. PPIX possesses two double bonds in its structure, and so it can be covalently incorporated into the membrane. The response characteristics of the PPIX-immobilized optode membrane were explored using aqueous solutions with different concentrations of HNO(3) or HCl. The optode membrane provided characteristic Soret band absorption spectra depending on the hydrogen ion concentration; the absorbance at 410 nm increased with increasing the concentrations in the range of 0.15-2 M, corresponding to the range of pH -0.3 to 0.8. The absorption signal reached 90% of its final value within 10 s, while the absorption signal was quite readily returned to background level simply by passing 2 mL of distilled water through a flow cell with a volume of 16.5 muL placed on the SOWG. Due to the rapid response and reversibility, this sensor could be operated in a flow-through mode as well as in a conventional static mode, where deionized water was conveniently used as a carrier and conditioning solution. In terms of the stability and precision, this sensor showed no significant change in response even after 100 assays and after being stored in a dry condition for over 6 months. Relative standard deviations for 10 replicate measurements were less than 1.8% in the linear range, and the detection limit calculated from 3 times of the standard deviation was 0.02 pH unit.     

Formation of 1D and 2D gold nanoparticle arrays by divalent DNA-gold nanoparticle conjugates

Divalent DNA-AuNP (gold nanoparticle) conjugates comprising two DNA strands at diametrically opposed positions are prepared. Highly linear 1D and tetragonal lattice-like 2D AuNP arrays are constructed using the conjugates and DNA assemblies based on T- and double-crossover motifs and the Holliday junction.     

Numerical analysis of residual stress distribution generated by welding after surface machining based on hardness variation in surface machined layer due to welding thermal cycle

Recently, stress corrosion cracking (SCC) has been observed near the welded zone of the primary loop recirculation pipes made of low-carbon austenitic stainless steel type 316L in boiling water reactors. SCC is initiated by superposition effect of three factors. They are material, environmental and mechanical factors. For non-sensitized material such as type 316L, residual stress as a mechanical factor of SCC is comparatively important. In the joining processes of pipes, butt welding is conducted after surface machining. Surface machining is performed in order to match the inside diameter and smooth surface finish of pipes. Residual stress is generated by both processes. Moreover, residual stress distribution generated by surface machining is varied by subsequent welding processes, and it has the maximum residual stress around 900 MPa near the weld metal. The variation of metallographic structure, such as recovery and recrystallization, in the surface machined layer due to the welding thermal cycle is an important factor for this residual stress distribution. In this study, thermal ageing tests were performed in order to evaluate hardness variation due to the thermal cycle in the surface machined layer. Results of thermal ageing tests were applied to the finite-element method as the additivity rule of the hardness variation. Varied hardness was converted into equivalent plastic strain. Then, thermo-elastic-plastic analysis was performed under residual stress fields generated by surface machining. As a result, analytical results of surface residual stress distribution generated by bead-on-plate welding after surface machining show good agreement with measured results by the X-ray diffraction method. The maximum residual stress near the weld metal is generated by the same mechanism as in the both-ends-fixed bar model in the surface machined layer that has high yield stress.     

Preparation of gelatin fiber by gel spinning and its mechanical properties

A gel‐spinning process was used in an attempt to prepare a gelatin fiber with a high level of drawability. A gel fiber prepared by extrusion of 15 wt % gelatin in dimethyl sulfoxide into methanol at ?20°C was drawn to sixteen times the original length. After extraction of the dispersion medium, the mechanical strength of the fiber increased markedly with the draw ratio, and the fiber exhibited a tensile strength of 146 MPa and a Young's modulus of 2.3 GPa when drawn to the maximum. A gelatin fiber with greater mechanical strength was obtained when ethylene glycol was used as the spinning solvent. The X‐ray diffraction profile indicated the formation of triple‐helical structures and their lateral association, which is responsible for the mechanical strength of the fiber. Heat‐treatment improved the water‐resistance of the prepared fiber. γ‐Irradiation and treatment with glutaraldehyde improved the mechanical strength of the fiber. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008