Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains and its application to the hydrogel

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains were obtained in 62–78 % yields by a radical copolymerization of limonene oxide (LO) and PEG methylacrylate (PEGA) with different feed ratios. Degree of LO incorporation into the copolymer was determined as 12–23 % by ¹H NMR spectroscopic analysis. The copolymer having LO unit:PEGA unit = 19:81 formed polymer associates in water, particle diameter of which was ranged mainly from 4 to 66 nm and hydrodynamic mean diameter was 12.3 nm. Its critical micelle concentration was determined as 0.53 g/L by fluorescence spectroscopic analysis. A cross-linking reaction of the epoxy groups in the side chains was conducted with 3.97 mol% (to the epoxy group) of branched poly(ethylene imine) as a cross-linker to give the corresponding hydrogel in 56 % yield. The hydrogel can absorb water as much as 13 times its own mass.     

Development of localization system using ultrasonic sensor for an underwater robot to survey narrow environment

This paper describes a localization system for a swimming robot to survey underwater narrow environments. In that environment, external sensors cannot be set up to localize the robot position, as there are many structures and the robot moves three-dimensionally. Therefore, the position needs to be calculated only by internal sensors. In this work, a new localization method based on map-matching is proposed, referring to cross-sectional shape data cut from a three-dimensional computer-aided design (CAD) data as an environmental map and structural shapes measured by a range sensor. As a range sensor, an ultrasonic sensor which is two-dimensional scanning-type was developed. The reflected signals of the ultrasonic sensor have some noise. Only structural shape data are extracted from the reflected signals. The image correlation is used as the matching method. Experiments to evaluate the performance of the proposed system were implemented at a mock-up environment. As a result, it was confirmed that the position was detected with an accuracy of 100 mm. The error is mainly caused by measurement error of the ultrasonic sensor that is used to calculate structural shapes. We concluded to improve the measurement accuracy of the ultrasonic sensor to reduce localization error.     

Yield of OH radicals in water under heavy ion irradiation. Dependence on mass, specific energy, and elapsed time

Dependence of yields of OH （hydroxyl） radicals on the mass and specific energy of heavy ions and elapsed time after irradiation was investigated, to understand chemical reactions of aqueous solutions. The yields of irradiation products of phenol, super-linearly increased with the incident energy of He, C, and Ne ions ranging from 2 to 18 MeV/u. The yields of the OH radicals were estimated by analyzing the yields of the irradiation products of phenol. The yields of the OH radicals increased with the specific energy for each ion, but decreased both with the mass of each ion at the same specific energy and elapsed time after irradiation.     

Fabrication of elastic composite hydrogels using surface‐modified cellulose nanofiber as a multifunctional crosslinker

We fabricate composite hydrogels using surface‐modified cellulose nanofiber (CNF) and N‐isopropylacrylamide (NIPAm) as a multifunctional crosslinker and monomer, respectively. We expect to produce unique network structures that lead to elastomeric properties rarely reported for CNF‐based materials. The modification of CNF is performed to introduce polymerizable vinyl groups onto the surface of CNF via condensation between the surface hydroxyl groups and 3‐(trimethoxysilyl)propylmethacrylate. The modification and morphology of the surface‐modified CNF (mCNF) are confirmed by FTIR, solid‐state NMR, and FE‐SEM, respectively. We conduct in situ radical polymerization under various conditions using mixtures of the mCNF aqueous suspension, NIPAm monomer, radical initiator, and catalyst. The mechanical properties of the obtained hydrogels (water content = 90 wt %) are evaluated. The gels can be elastically stretched to more than 700 times their original lengths and exhibit an apparent shape recovery with a small permanent deformation (～1/5 of the applied deformation under the gravity field). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42906.     

Combination of cytomegalovirus enhancer with human cellular promoters for gene-induced chondrogenesis of human bone marrow mesenchymal stem cells

High-expression plasmid vectors for human mesenchymal stem cells (MSCs) were constructed by combination of cytomegalovirus immediate-early enhancer with cellular promoters. MSCs transfected with the vector showed higher transgene production of a cytokine, which increased the differentiation level to chondrocytes.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.