Development of a MAGLEV superconducting magnet for the Yamanashitest line in Japan: vibration characteristics and analysis for design

A high-performance and high-reliability magnetically levitated (MAGLEV) superconducting magnet (SCM) was developed. Its heat generation per unit time by the electromagnetic forces due to the spatially fifth ripple magnetic fields from levitation coils is under 2 W at the frequency range in which vehicles are levitated. The vibration mode of inner vessels that makes the largest contribution to heat generation in SCMs is clarified, the torsion mode. A modeling method to analyze SCM vibration, which considers the effect of the bogie frames of a vehicle, is examined, and heat generation in SCMs is calculated from the vibration of the inner vessel. Using the numerical analysis method, new SCMs combined with new bogie frames for the Yamanashi Test Line are designed. Good performance in vibration and heat generation of these SCMs is predicted by numerical analysis     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Performance analysis of variable optical delay circuit using highly nonlinear fiber parametric wavelength converters

The performance of a variable optical delay circuit that employs a fiber loop with highly nonlinear fiber parametric wavelength converters is discussed using both experiments and simulations. In our optical delay circuit, the delay time is determined from the number of circulations, which is controlled by the initially selected wavelength of the optical signal. We discuss the factors that limit the number of circulations described in our previous paper, derive the parameters that provide good performance levels, and confirm the performance by simulation. The simulated results indicate that 100 wavelength conversions can be achieved, namely, 100 different delay times can be given to optical packets.     

Smart Ferrofluid with Quick Gel Transformation in Tumors for MRI‐Guided Local Magnetic Thermochemotherapy

Improved techniques for local administration of anticancer drugs are needed to reduce the side effects of chemotherapy owing to leakage of anticancer drugs from tumors and to enhance therapeutic efficacy. This study presents the development of smart ferrofluid that transforms immediately into a gel in tumors and generates heat in response to an alternating magnetic field (AMF), simultaneously releasing the anticancer drug. The smart ferrofluid, which is synthesized using less toxic magnetic materials (Fe₃O₄ nanoparticles), natural polysaccharides (alginate), and amino acids (cysteine), can also act as a contrast agent for magnetic resonance imaging (MRI). The ferrofluid also incorporates an anticancer drug (i.e., doxorubicin, DOX) via hydrogen bonds. AMF causes heating of gels prepared from the DOX‐containing ferrofluid, resulting in gel shrinkage and DOX release. In vivo experiments demonstrated that the ferrofluid transforms into a gel in the tumor, with the gel remaining in the tumor. Furthermore, magnetic thermochemotherapy using this ferrofluid inhibited tumor growth, while magnetic hyperthermia alone had only a marginal effect. Thus, the combination of magnetic hyperthermia and chemotherapy may be important for suppressing tumor growth. In summary, the ferrofluid presented here has the potential to facilitate MRI‐guided magnetic thermochemotherapy through a combination of endoscopic technologies in the future.     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Gain-shifted TDFA employing high concentration doping techniquewith high internal power conversion efficiency of 70%

The amplification characteristics of a high Tm³⁺ concentration gain-shifted Tm-doped fluoride fibre amplifier (GS-TDFA) have been determined with a high input signal power. This GS-TDFA achieved the highest reported internal power conversion efficiency of 70% with a double pass configuration