Short‐span seeking control of hard disk drive with vibration suppression PTC

In a short‐span seeking‐mode of hard disk drives, the resonance modes are getting crucial obstruction to meet the demand on high‐speed data access. In this paper, a novel vibration suppression perfect tracking control (PTC) method is proposed based on controllable canonical realization. In the proposed method, it is assumed that the plant is modeled as the rigid and primary resonance mode. By using this model, the feed forward controller is designed with PTC by multirate sampling control in order to suppress the primary vibration. Additionally, the higher‐order resonance vibration is attenuated by using the trajectory MHVT. The proposed method achieved 16% faster seeking than MPVT, a conventional method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 66–72, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20546     

Adaptive Playout Buffer Algorithm for Enhancing Perceived Quality of Streaming Applications

An end-to-end packet delay in the Internet is an important performance parameter, because it heavily affects the quality of real-time applications. In the current Internet, however, because the packet transmission qualities (e.g., transmission delays, jitters, packet losses) may vary dynamically, it is not easy to handle a real-time traffic. In UDP-based real-time applications, a smoothing buffer (playout buffer) is typically used at a client host to compensate for variable delays. The issue of playout control has been studied by some previous works, and several algorithms controlling the playout buffer have been proposed. These studies have controlled the network parameters (e.g., packet loss ratio and playout delay), not considered the quality perceived by users. In this paper, we first clarify the relationship between Mean Opinion Score (MOS) of played audio and network parameters (e.g., packet loss, packet transmission delay, transmission rate). Next, utilizing the MOS function, we propose a new playout buffer algorithm considering user's perceived quality of real-time applications. Our simulation and implementation tests show that it can enhance the perceived quality, compared with existing algorithms.     

Antihypertensive effect of chronic KT3-671, a structurally new nonpeptide angiotensin AT1-receptor antagonist, in stroke-prone spontaneously hypertensive rats

KT3-671 (2-propyl-8-oxo-1-[(2'-(1H-tetrazole-5-yl)biphenyl-4-yl)methyl]-4,5,6, 7-tetrahydrocycloheptimidazole), a structurally new nonpeptide angiotensin AT1-receptor antagonist, was administered orally and repeatedly to 15-week-old stroke-prone spontaneously hypertensive rats for 7 weeks; and its effects on blood pressure, heart rate, renal function, plasma renin concentration (PRC), plasma aldosterone concentration (PAC) and hypertension-related tissue damage in the brain, heart, kidney and mesenteric artery were investigated. KT3-671 at a dose of 3 or 10 mg/kg, p.o. per day prevented development of hypertension and produced a significant and consistent reduction of blood pressure in a dose-dependent manner. Enalapril at a dose of 10 mg/kg per day produced cardiovascular effects similar to those of KT3-671 at 10 mg/kg. Despite marked reduction in blood pressure, neither KT3-671 nor enalapril affected the heart rate. KT3-671 at 10 mg/kg produced a transient and significant reduction of urinary sodium excretion in the second week, but did not affect renal function at any other time during the experimental period. Both KT3-671 at 10 mg/kg and enalapril at 10 mg/kg produced a significant increase in PRC and showed a tendency to decrease PAC. Repeated administration of KT3-671 reduced the severity of the pathological changes in the kidney. These results suggest that KT3-671 is a potentially useful antihypertensive drug.     

Synthesis of stereoblock poly(methyl methacrylate) via transformation of isotactic-specific living polymer anion to syndiotactic-specific anion

Polymerization of methyl methacrylate (MMA) by isotactic poly(methyl methacrylate) (PMMA) living anion, prepared with t-C₄H₉MgBr in toluene at ?60°C, was carried out at ?78°C in the presence of trialkylaluminiums (R₃Al; R = CH₃, C₂H₅, and n-C₄H₉) to obtain a stereoblock PMMA, isotactic PMMA-block-syndiotactic PMMA. Among the R₃Als, (CH₃)₃Al gave most effectively the steroblock PMMA with narrow molecular weight distribution. The fraction of rr triad in the syndiotactic PMMA block increased with increase in the ratio of Al/Mg and reached about 76% at a ratio of Al/Mg ≥ 6. The method was also used to prepare stereoblock copolymer comprising isotactic PMMA block and syndiotactic block of butyl methacrylate. Stereocomplex formation and solution viscosity of the stereoblock PMMA were also studied.     

Bloch line propagation with Co-Pt bit patterns in stripe domainsconfined by grooves

Bloch Line (BL) pair propagation using a field-access scheme has been investigated in the straight pair of stripe domains stabilized around completely etched grooves. Potential wells to define the bit position for the BL pairs were produced by the stray field from Co-Pt thin-film patterns with high coercivity. By applying a series of asymmetric triangular bias pulsed fields, a BL pair was propagated at 500 kHz with a 14% bias field margin. At 1 MHz, however, the bias field margin was only 7%. This reduction was due to the long relaxation time of the domain walls. The drive field margins depended on the orientation of the propagation direction relative to the magnetized direction of the Co-Pt bit patterns. This dependence became small when the in-plane bias field was decreased     

Numerical simulation and PIV measurement of the flow-field in optical disc drives

A system of numerical flow simulation with an automated mesh generator and parallelized solver was developed and applied to the flow-field inside an optical disc drive. In this simulation system, a uniformly spaced Cartesian grid is used to reduce time and automatically generate a mesh from CAD data for complicated geometries, such as optical disc drives. The simulation results of optical disc drives are validated by particle image velocimetry (PIV) and pressure-distribution measurements. The measured velocity distributions above a rotating disc and around a pick-up unit show quantitative agreement with the simulated distributions. For the pressure distributions on a top case of an optical disc drive, although there is an error of 10% between simulated and measured results, the position of the peaks and distribution of pressure show good agreement. Comparing both sets of measurements, the simulation results in a Cartesian grid system are sufficiently accurate to enable the flow-field to be quantitatively assessed. This numerical flow simulation is applied to investigate the detailed flow-field in a commercial optical disc drive.     

Correlation between maximum temperature increase and peak SAR with different average schemes and masses

This paper investigates the correlation between maximum temperature increases and peak spatial-average specific absorption rates (SARs), calculated by different average schemes and masses. For evaluating the effect of mass on the correlation properly, a three-dimensional Green's function is presented. From our computational investigation, no best average mass for peak spatial-average SAR exist from the aspect of the correlation with maximum temperature increase. This is attributed to the frequency dependent penetration depth of EM waves. Maximum temperature increase in the head including the pinna is reasonably correlated with peak spatial-average SARs for most average schemes and masses considered in this paper. Maximum temperature increase in the head only (excluding the pinna) is reasonably correlated with peak 10-g SARs for the average schemes considered in this paper. The rationale for this result is explained using the Green's function. The point to be stressed here is that the slope correlating them is largely dependent on the average scheme and mass. Additionally, good agreement is observed in the slopes obtained by using two head models, which have been developed at Osaka University and Nagoya Institute of Technology. However, weak correlation is observed for the brain, which is caused by the difference of the positions where peak SAR and maximum temperature increase appear. The 95th percentile values of the slope correlating maximum temperature increases in the head or brain and peak spatial-average SAR are quantified for different average schemes and masses.