Performance evaluation of a multichannel transceiver system forADSL and VHDSL services

The authors study the performance of a multichannel modulation method for asymmetric digital subscriber lines (ADSLs) and very high-speed digital subscriber lines (VHDSLs). In the ADSL case, over all unloaded North American subscriber lines in the test set, a unidirectional 1.536 Mb/s data rate service from the end office to the customer premises is possible on a single twisted pair at an error rate of 10^-7 with at least a 6 dB margin used coded multichannel modulation with sufficient transmit power. In the VHDSL case, data rates in excess of 100 Mb/s can be transmitted reliably, at an error rate of 10^-7, using uncoded multichannel modulation on a single twisted pair over a distance ⩽150 ft with a sufficiently high sampling rate (≈24 MHz) and transmit power. It is shown that a cost-effective multichannel transceiver design suggested for high-speed digital subscriber line (HDSL) service will also work well for ADSL and VHDSL services with only minimal modifications     

Assessment of underground cable ratings based on distributed temperature sensing

Numerous power utilities have installed advanced distributed temperature sensing (DTS) systems to measure the temperature of underground cables. This paper presents a general procedure for real-time assessment of underground cable ratings based on DTS. After the identification and location of hot spots on a cable, the cable installation data, load, and DTS-recorded temperature over a period of time are used to estimate soil thermal parameters and assess cable ratings under normal and overloading conditions. In order to accurately estimate soil thermal parameters, a combined technique of the finite-element method and gradient-based optimization is used. The technique was validated in the laboratory and applied to a rating assessment of a 230-kV/500-MVA cable circuit. The assessed continuous and emergency ratings are helpful in improving the operation of this circuit.     

New fault-location method for a single multiterminal transmission line using synchronized phasor measurements

This paper describes a new iterative method to locate a fault on a single multiterminal transmission line. The method uses synchronized voltage and current measurements from all terminals. Using positive-sequence components of the prefault and postfault waveforms, positive-sequence source impedances are estimated. Using these source impedances and the line data, the positive-sequence bus impedance matrix (Z/sub bus/) is formed. Using the properties of Z/sub bus/, an iterative algorithm is proposed. The algorithm first identifies the faulted section and then locates the fault on this section. This algorithm is applied to the data obtained from the Electromagnetic Transients Program simulation of a multiterminal transmission line. The simulation results show that the distinctive features of this method are that it performs with very high accuracy for all types of faults at different fault locations and is practically immune to fault resistance.     

Electric arcing burn hazards

The paper presents recent results in the area of high-power testing aimed at improving the safety of electrical staff working on live equipment. The driver for this work is the American Guide (IEEE 1584) on such exposure hazards, which has the potential for international adoption and, in the authors' opinion, does not provide a suitable methodology for assessing the hazard. A selection of results is presented, obtained in a high-power-system-supplied commercial test laboratory, using the latest charge-coupled device (CCD)-based high-speed video-recording methods. Results are reported for 415-V currents in the range of 1000-70 000 prospective root mean square (rms) amperes and for tests at 5000 V in the range of 1000-27 000 A. The impact of conventional protective devices is included together with some disturbing video results for circuit-breaker-protected systems. The major part of the material in this paper was first presented at the 7th International Conference on Electric Fuses and Their Applications, Jurata, Poland, in 2003.     

German codes and standards concerning metallic nuclear power plant components — Present state and trends expected

The German codes and standards for the design of nuclear power plants are the KTA Safety Standards. For integrating them into the international code activities the following aspects are presented: Organisation and function of the KTA, extend of standard activities, standards for metallic components, bases for the standard development, structure of a representative standard, comparison with international standards, and current activities in the standard work.     

The herbicide propachlor--14 C synthesis, toxicologic problems and methodology studies on the determination of residues in corn, potatoes, water and soil

Using the synthesized agent propachlor (N-isopropyl-2-chloroacetanilid) labelled with 14C, methodical investigations revealed an extremely high steam volatility not being assumed before because of the low vapour pressure. The method of steam distillation basing on this fact is of universal application to the processing of maize, potatoes, water, and soil, in which propachlor could be quantitatively determined by gas chromatography with a detection sensitivity of 0.02 ppm. Furthermore, this methods allows a simple purification of the raw product of synthesis containing impurities up to 20%. Propachlor codistilled with steam had a purity of more than 99%. Possibly, the high steam volatility of propachlor could have economic and toxicological consequences as to its application (volatilization in the open air with a high atmospheric humidity along with high temperatures). Therefore, an investigation of the steam volatility in the general screening programme for new agents is to be recommended in addition to the usual investigations of steam pressure.