The effect of charge relaxation on the electromagnetic radiation of an oscillating charged viscous drop

A dispersion equation for the capillary oscillations of a charged drop of incompressible liquid possessing a finite electric conductivity is derived with an allowance for the energy lost as a result of the electromagnetic wave emission. The magnitude of the electromagnetic radiation losses of the oscillating drop linearly increases with the electric conductivity and the surface mobility of charge carriers.     

Analysis of the Safety of the Burial Grounds of Decontamination Waste of Chernobyl Origin in the Territory of Belarus

Unsatisfactory conditions of storage of decontamination waste (DW) in the storages formed in the territory of Belarus after the Chernobyl accident require the evaluation of the level of protection of the environment and population. The potential hazard of the decontamination waste burial grounds (DWBGs) has been evaluated based on the use of a generalized multichamber model that was verified by comparing the calculation results and the results obtained by the American (GW SCREEN) model. The characteristics of the 24 largest and most hazardous DWBGs are given and the evaluations of their safety are presented. The zones of influence of these storages, whose size varies from 100 to 330 m, have been determined. The reliability of the prediction evaluation of a possible hazardous radioactive contamination of water near the storages has been verified using the Dudichi DWBG as an example.     

Useful solar heat gains in multi-zone non-domestic buildings as a function of orientation and thermal time constant

Two parameters affecting useful solar absorption are orientation and thermal mass. Solar energy absorption in buildings depends on these parameters in a complex manner particularly when considering large glazing ratios and large direct components of insolation. Therefore, where parameters of different zones in a multi-zone building vary, useful solar absorption will also vary. For higher northern latitudes, compared with south orientation, useful solar absorption differs by about 2%, 4% and 6% between large and small time constants for east, west and north orientations, respectively. The smallest and largest differences are for east and north orientations, respectively. Fenestration design should be a consequence of orientation and overshading, seeking to balance daylight, solar gains and heat losses.     

Ultrasonic Evaluation of Solution Infiltration Depth in a Porous Material

The paper presents investigations of the solution infiltration depth in porous materials measured using changes in the velocity of the longitudinal ultrasonic wave versus penetration depth.     

Inductive switching of 4H-SiC gate turn-off thyristors

The high-temperature operation of a silicon carbide gate turn-off thyristor is evaluated for use in inductively loaded switching circuits. Compared to purely resistive load elements, inductive loads subject the switching device to higher internal power dissipation. The ability of silicon carbide components to operate at elevated temperatures and high power dissipations are important factors for their use in future power conversion/control systems. In this work, a maximum current density of 540 A/cm² at 600 V was switched at a frequency of 2 kHz and at several case temperatures up to 150°C. The turn-off and turn-on characteristics of the thyristor are discussed     

Present and preferred housing of one-personhouseholds in the Netherlands, 1998

The number of never-married and divorcedpersons living in one-person households willcontinue to increase strongly. The presenthousing stock shows different housingcharacteristics for highly urbanized and lessurbanized areas. There are differences inowner-occupancy, the share of one-familyhouses, the average number of rooms, and houseprices in the present and the preferreddistribution of these characteristics forone-person households. One-person householdscannot be treated as a single group. Severalgroups must be distinguished, each with its ownpreferences and perspectives. Solutions for thegap between present and preferred housing couldbe found in promoting mobility in the housingmarket and adequate new construction.     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

The ponding problem on elastic membranes: an analog equation solution

 In this paper, the nonlinear response of elastic membranes with arbitrary shape under partial and full ponding loads has been analyzed. Large deflections are considered, which result from nonlinear kinematic relations. The problem is formulated in terms of the displacements components and the three coupled nonlinear governing equations are solved using the analog equation method (AEM). The membrane may be prestressed either by prescribed boundary displacements or tractions. Using the concept of the analog equation the three coupled nonlinear equations are replaced by three uncoupled Poisson's equations with fictitious sources under the same boundary conditions. Subsequently, the fictitious sources are established using a procedure based on the BEM and the displacement components as well as the stress resultants at any point of the membrane are evaluated from their integral representations. In addition to the geometrical nonlinearity, the ponding problem is itself nonlinear, because the ponding load depends on the deflection surface that it produces. Iterative schemes are developed which converge to the equilibrium state of the membrane under the ponding loads. Several membranes are analyzed which illustrate the method and demonstrate its efficiency and accuracy. The method has all the advantages of the pure BEM, since the discretization and integration is limited only to the boundary. Received 28 July 2001     

Literature reviews in student project reports

Writing project reports is an important part of the engineering curriculum at Singapore universities. One important section of the formal report is the literature review. Most universities around the world provide guidelines on writing reviews, emphasizing that plagiarism is unethical. However, these guidelines do not offer explicit training on how to avoid plagiarism. In order to write academically acceptable reviews while avoiding copying from source materials, students face a major challenge and resort to employing various strategies to cope with the task. In this study, we examined the literature review sections of final year project reports to find out how engineering undergraduates in a Singapore university cope with writing reviews and to suggest ways in which they can extend their skills to improve their literature reviews.     

Changes in physicochemical properties of active carbon within a grain

Commercial active carbons were subjected to abrasion in a spouted bed and as a result, active carbons, with external layers removed to different degrees, were obtained. For active carbons so obtained, physicochemical properties were determined from densimetric and adsorption investigation.It was found that radial changes in the properties of active carbons resulted from the nature of the activation reaction.It seems that the method of working by abrasion in spouted beds can also be used for investigating other processes taking place in fluid—solid system.