CMV colitis masquerading as colon cancer--an unusual presentation of acquired immunodeficiency syndrome

To determine whether there is any correlation between sudden decrease in barometric pressure and onset of labor, a non-experimental, retrospective study at a 948-bed tertiary care hospital was done. Pregnant patients of 36 weeks gestation or more who presented with spontaneous onset of labor during the 48 hours surrounding the 12 occurrences of significant drop in barometric pressure in 1992 were included in the study. Significantly more occurrences of onset of labor were identified in the 24 hours after a drop in barometric pressure than were identified in the 24 hours prior to the drop in barometric pressure (P < 0.05). Therefore, the overall number of labor onsets increased in the 24 hours following a significant drop in barometric pressure.     

Evaluating generalized predictive control for a brushless DC drive

This paper proposes a new control approach for a brushless DC motor drive using the generalized predictive control (GPC) algorithm. Based on the same least-squares framework as in the controller design, we further develop the method to design an observer. The GPC algorithm uses the receding horizon approach whereby the control signals are determined by minimizing a quadratic cost function. Our study shows that the rise time and settling time of the servo system have an approximate linear relationship with the prediction horizon. Thus, it is used to tune the controller of the drive. Moreover, the control weighting factor can be used to smooth the controller output. The proposed algorithm has been implemented using a digital signal processor (DSP) and tested in real time with a prototype system. The performance and robustness of the algorithms have been evaluated both in simulation and experiment. The results show that the drive performs reasonably well despite load changes and step changes in the position setpoint. Furthermore, it is fairly robust against motor parameters change     

用金字塔图法匹配边界图象的三眼立体视觉方法

本文在分析了双眼立体视觉面临的本质困难之后，提出了用金字塔图法匹配特征基元的三眼立体视觉方法，这种方法由于建筑在透视投影几何原理的稳固基础上，无须任何先验限制，也不以图象相似性为基础，故可较好地解决精度与匹配难度的矛盾，且运用金字塔图法进行匹配传播使在保证精度的基础上，匹配速度大大提高，对计算机人工图象的匹配结果表明，误匹配率几乎为零，且有较高的匹配速度和精度。     

计算机集成制造系统（CIMS）国际发展动态

ＣＩＭＳ（计算机集成制造系统）是世界上高技术开发项目之一．ＣＩＭＳ是涉及广泛技术领域的复杂系统，当前的研究课题覆盖了ＣＩＭ中方法学、技术和应用领域的部分内容．本文简要讨论ＣＩＭＳ的国际发展动态．     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

Extended application of the complex source-point theory

In this paper, the complex source-point theory used for a symmetric concave spherical resonator is extended to an asymmetric concave spherical resonator. Thus, the formulae for the field distribution of the asymmetric spherical resonator can be easily deduced from the formulae for the field distribution of the symmetric resonator, thereby the application range of the complex source-point theory is enlarged and a convenient method is provided for the field analysis of an arbitrary spherical resonator.     

NaY晶化母液制备硅铝胶的技术探讨

在导向剂法合成Y型分子筛的工艺下，晶化母液中SiO₂的含量为50～55g/l,Na₂O含量为20～25g/l，相当于模数为1.65～2.58的稀水玻璃，将晶化母液分离处理后，在晶化母液中加入一定量的硫酸铝溶液使硅沉淀,经过滤和水洗后即可制备出合格的硅铝胶，以便进行重新利用。     

工艺因素对金属封装外引线弯曲疲劳的影响

考察了金属封装外壳制造工艺对外引线弯曲疲劳的影响,发现电镀镍是导致外引线弯曲次数明显减少的最主要工艺步骤,且随镀镍层厚度的增加,弯曲次数减少。此外还讨论了外引线的氢含量和晶粒度对引线抗疲劳能力的影响。     

既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

7-羟基全氢化噁唑并噁嗪鞣剂的合成及其鞣性研究

报导了新型鞣剂 7-羟基全氢化唑并嗪 (以下简称 OX- Z)的合成方法。试验确定合成的最佳条件为 :在氮气保护下 ,将等摩尔量的二乙醇胺在 10℃水浴中缓慢滴入乙二醛中 ,滴加时间 0 .5 h,在 2 0℃水浴中继续反应 1.5 h,产率为 6 2 .9%。 OX- Z对浸酸绵羊皮单独鞣制 ,可使收缩温度升高到 87℃。最佳鞣制条件为 :p H10 .0 ,OX- Z用量 5 % ,鞣制时间 8h。在对 OX- Z与皮胶原的结合类型的研究中证明它们之间是以化学键结合的。