Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

纳米Pt膜的晶粒尺寸及其对热导率的影响

采用电子束-物理气相沉积法（EB-PVD）制备了6个厚度为15-62nm的铂薄膜,研究了纳米薄膜的晶粒尺寸及其对热导率的影响规律．当薄膜厚度小于30nm时,晶粒平均尺寸接近于薄膜的厚度;晶粒尺寸随着薄膜厚度的增加而增大并趋于定值;当薄膜厚度大于30nm时,晶粒尺寸约为20nm．受薄膜的表面和内部晶界的综合影响,铂纳米薄膜的热导率大大低于体材料的值,并且纳米薄膜的热导率随着薄膜厚度的增加而增大并趋于一个低于体材料热导率的值．     

Development of –1 MV DC Filter and High‐Voltage DC Measurement Systems for ITER NBI

This paper presents the development results of a ?1 MV dc filter and dc measurement systems for an ITER (International Thermonuclear Experimental Reactor) neutral beam injector (NBI) system. High accuracy of 0.5% and fast responsivity of 3.3 μs, ?3 dB are required for the dc measurement systems: both dc voltage dividers and DCCTs. Circuit design and thermal flow design were carried out to clarify and minimize their effects on the accuracy and responsivity. The validity of the established design was demonstrated by the actual‐product tests; temperature rise of each components fell below the allowable value; inner components of dc filter withstood dc ?1.2 MV; each voltage divider accurately measured the voltage during the dc ?1.2 MV withstand voltage test; the voltage dividers and the DCCTs were adequate to the requirements of responsivity (3.3 μs, ?3 dB).     

A new methodology to guarantee the structural integrity of Al2O3/SiC composite using crack healing and a proof test

Structural ceramics are brittle and sensitive to flaws. As a result, the structural integrity of a ceramic component may be seriously affected by inherent flaws. Self-crack-healing is an excellent answer to this problem. At the moment, however, there is no technique to heal embedded flaws. Therefore, a technique to guarantee the reliability of ceramic components is demanded, and thus a technique using crack healing followed by proof test was developed by K. Ando et al. to accomplish this. With this technique, testing the mechanical behaviour of the crack-healed zone is very important for ensuring the structural integrity of a ceramic component. In this study, first Al₂O₃/SiC composite with an excellent crack-healing ability was sintered. Second, a crack was introduced on the sample (3 mm × 4 mm × 36 mm), which reduced the bending strength by about 80%, and subsequently the crack was healed. Third, a proof test was carried out on the crack-healed sample. Last, using the crack-healed and proof-tested sample, a fracture test was carried out up to 1373 K. The measured minimum fracture stress (σ_Fmin) was compared with the theoretical minimum strength (σ_G) from room temperature (R.T.) to 1373 K. It was concluded that σ_G showed good agreement with σ_Fmin up to 1373 K and that the crack healing followed by proof test was an excellent technique to increase the survival probability by administering a proof test and to guarantee the reliability of Al₂O₃/SiC composite.     

Investigation of Water Tree Degradation in Dry‐Cured and Extruded Three‐Layer (E‐E Type) 6.6‐kV Removed XLPE Cables

Dry‐cured and extruded three‐layer (E‐E type) 6.6‐kV cross‐linked polyethylene (XLPE) cables were introduced into electric power systems more than 30 years ago, but they do not experience failures because of water tree degradation. Also, the degradation index of water treeing for these cables has not been established. Therefore, investigating results of residual breakdown voltage and water tree degradation of these cables will help us plan for cable replacement and determine water tree degradation diagnosis scheduling, and will be fundamental data for cable lifetime evaluation. In this study, the authors measured the ac breakdown voltages of dry‐cured and E‐E type 6.6‐kV XLPE cables removed after 18 to 25 years of operation and observed the water trees in their XLPE insulation. As a result, it was observed that breakdown voltages were larger than the maximum operating voltage (6.9 kV) and the ac voltage for the dielectric withstanding test (10.3 kV). Water trees were mainly bow‐tie water trees and their maximum length was approximately 1 mm. Although the number of measured cables was limited, the lifetime of this type of cable was estimated to be approximately 40 years, even experiencing water immersion.     

Formation and microwave dielectric properties of Sr(Ga0.5Ta0.5)O3-based complex perovskites

The Sr(Ga0.5Ta0.5)O3-based perovskites with O2- and/or Sr2+ vacancies were formed by changing the A-site and/or B-site cation ratios. The Sr-deficient perovskites with a limited composition of Sr0.86(Ga0.36Ta0.64)O3 could be obtained, whereas oxygen vacancies were hardly created. The B′-site Ga3+ cation could be replaced with large Sc3+, In3+, Y3+, Nd3+ and La3+. The crystal symmetry of the complex perovskites changed from cubic (B′=Ga3+, Sc3+, In3+) to tetragonal (B′=La3+) through rhombohedral (B′=Y3+, Nd3+). The dielectric permittivities of these ceramics indicated no distinct dependence on the B′-site cation species. The temperature coefficient of permittivity might be associated with the symmetry change of the perovskite phases. Higher microwave Qf values, >Qf=38 000 GHz, were obtained for our complex perovskite ceramics, except with B′=La3+. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solidification behaviour of calcium carbonate via aragonite-calcite wet transformation with hydrothermal hot pressing

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Bearing failure in plain woven C_C composites

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

X100试验管线钢管的规范和生产

介绍了位于英国诺林伯利亚,钢管直径1 219 mm(48 in),输气压力18 MPa(180 bar),由英国BP公司承建的X100试验管线的建设概况.根据X100试验管线的设计参数制定了相应的钢管规范,设计了X100管线钢管母材、焊缝金属和热影响区的合金成分.按设计的合金成分由住友金属鹿岛钢铁厂生产了钢材、钢板,并...