Effect of melt spinning on the microstructure and mechanical properties of three Ni-base superalloys

A microstructural and mechanical analysis was performed on three rapidly solidified nickel base superalloys. Transmission and scanning electron microscopy along with tensile tests were performed on the ribbons in the as-cast and aged condition. This investigation permitted a correlation to be made between cooling rate, microstructure, and mechanical properties. It was found that melt spinning significantly altered the physical characteristics of the alloys studied. The rapid cooling rates (∼10⁷ K/s) produced ribbons with a low dislocation density and small (∼1 μm) low angle cells. The precipitation of γ′ was suppressed, producing alloys with a smaller volume fraction of precipitates and lower APBE than in the conventionally cast condition. Also, the matrix/precipitate lattice mismatch was higher in the melt spun foils. Tensile strengths were similar to those in the conventional form; however, no measurable ductility was present. Aging the ribbons resulted in increases in γ′ volume fraction, tensile strengths, APBE, and elongations compared to the as-cast ribbons. The results of this work suggest that many of the microstructural refinements produced by melt spinning are lost after a short aging time at moderate temperatures.     

Does a regional accent perturb speech processing?

The processing costs involved in regional accent normalization were evaluated by measuring differences in lexical decision latencies for targets placed at the end of sentences with different French regional accents. Over a series of 6 experiments, the authors examined the time course of comprehension disruption by manipulating the duration and presentation conditions of accented speech. Taken together, the findings of these experiments indicate that regional accent normalization involves a short-term adjustment mechanism that develops as a certain amount of accented signal is available, resulting in a temporary perturbation in speech processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assessing and interpreting personality change and continuity in patients treated for major depression.

Structural, mean- and individual-level, differential, and ipsative personality continuity were examined in 599 patients treated for major depression assigned to 1 of 6 forms of a 6-month pharmaco-psychotherapy program. Covariation among traits from the Five Factor model remained invariant across treatment, and patients described themselves as slightly more extraverted, open to experience, agreeable and conscientious, and substantially more emotional stable after treatment. Trait changes were only to a small extent explained by changes in depression severity. There was evidence for differential, individual-level, and ipsative stability, with stable personality profiles in terms of shape and to a lesser extent in terms of scatter and elevation. Traits remain relatively stable, except for emotional stability, despite the depressive state and the psychopharmacological interventions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modal Kalman filtering based impedance relaying

An algorithm is presented for computer distance relaying. It is based on modal Kalman filtering (MKF) to estimate fundamental phasors, MKF exploits all the measurement information available from a three-phase line and is founded on enhanced models of the electromagnetic transients noise. To support the modeling of noise for different faults, a study of nontrivial electrical networks with accurate electromagnetic transients modeling is made for 400 kV transmission lines. MKF fits the behavior of the different modal noise for the Clarke phasors, but it is invariant for each type of fault, assuring robustness and minimum error variance. To computer distance, Clarke αB phasors are transformed to +/- symmetrical components, and then a well-known expression is used to computer the positive impedance. Statistical analysis if presented to assess observation time versus estimation accuracy for the different types of line faults     

A study of mixtures of poly(ethylene oxide) with polystyrene or poly(styrene-co-acrylic acid) by inverse gas chromatography and viscosimetry

Summary Systems of poly(ethylene oxide)/polystyrene and of poly(ethylene oxide)/poly(styrene-co-acrylic acid) of different ratios were studied by inverse gas chromatography using benzene and n-decane as molecule probes and by viscosimetry in tetrahydrofuran. The transition temperatures as shown in the retention diagrams and the interaction parameters as determined by inverse gas chromatography and by viscosimetry showed that whereas poly(ethylene oxide) is incompatible with polystyrene, the introduction of amounts of acrylic acid groups into polystyrene chains by free radical copolymerization led to compatible systems of the acidic copolymer with the poly(ethylene oxide).     

Specific consumption of liquid biofuels in gasoline fuelled engines

Oxygenated fuels increase fuel consumption due to their low enthalpy of combustion; however, their high antiknock index renders them suitable for use in engines with a high compression rate, increasing their thermal yield. This study evaluated the performance of biorenewable oxygenated fuels (ethanol and isoamyl alcohol) and partially renewable fuels (ETBE: ethyl tert-butyl ether, TAEE: tert-amyl ethyl ether and di-TAE: di-tert-amyl ether) with high degree of purity and in mixtures with automotive gasoline, based on tests with Otto cycle engines. Among the oxygenated fuels evaluated here, di-TAE was found to present the best characteristics of performance, both individually and in mixtures with gasoline.     

Dogs (Canis familiaris) learn their owners via observation in a manipulation task.

Eighty-seven pet dogs (Canis familiaris) were involved in an experiment in which they had to solve a task to obtain a ball. After witnessing a full demonstration by their owner (10 times pushing the handle of the box, which released a ball), most dogs preferred to touch the handle sooner and more frequently in comparison with other parts of the box, and they used the handle to get the ball. In contrast dogs in 3 control groups developed their own respective methods. The lack of emergence of the ball and playing after the demonstration did not affect the learning performance strongly. This suggests that in dogs the outcome of a demonstration plays only a restricted role in the manifestation of social learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nitrogen dioxide effect in the reduction of nitric oxide by propane in oxidizing atmosphere

The role of nitrogen dioxide in the selective reduction of NO by propane over a Cu-MFI zeolite is investigated. NO₂ and NO reductions were carried out under similar conditions of reaction. In the presence of oxygen, the reduction of NO by C₃H₈ does not differ significantly from that of NO₂. In the absence of oxygen, the reduction of NO₂ by propane occurs with a partial decomposition of the nitric dioxide molecule. Such a decomposition leads to the formation of oxygen, which is responsible for the increase in catalytic activity by comparison with the same reaction performed with NO. NO₂ formed and released in the gas phase during the reduction of NO by propane in the presence of oxygen does not play a predominant role in the catalytic process.     

Electrophilic chlorination of methane over superacidic sulfated zirconia

Catalytic chlorination of methane was studied over SO ₄ ^2– /ZrO₂, Pt/SO ₄ ^2– /ZrO₂, and Fe/Mn/SO ₄ ^2– /ZrO₂ solid superacid catalysts. The reactions were carried out in a continuous flow reactor under atmospheric pressure, at temperatures below 240°C, with a gaseous hourly space velocity of 1000 ml/g h and a methane to chlorine ratio of 4 to 1. At 200°C with 30% chlorine converted the selectivity in methyl chloride exceeds 90%. At more elevated temperatures, the selectivity decreases but stays above 80% in methyl chloride at 225°C using the sulfated zirconia catalysts. The selectivity can be enhanced by adding platinum to sulfated zirconia catalysts. An iron and manganese-doped catalyst exhibited excellent selectivities at somewhat lower conversions. Methyl chloride is obtained at 235°C in selectivities greater than 85%. No chloroform or carbon tetrachloride is formed. The electrophilic insertion involves electron-deficient metal-coordinated chlorine into the methane C-H bond.Catalysis by solid superacids, 29. For part 28 see ref. [14].