Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling

Metallurgical and Materials Transactions A - The evolution of microstructure and texture of a two-phase austenite-ferrite twinning-induced plasticity steel during cold rolling was investigated and...     

Novel optical and structural properties of porous GaAs formed by anodic etching of n+-GaAs in a HF:C2H5OH:HCl:H2O2:H2O electrolyte: effect of etching time

Porous GaAs layers have been formed by anodic etching of n ⁺-type GaAs (10.0) substrates in a HF:C₂H₅OH:HCl:H₂O₂:H₂O electrolyte. A dramatic impact of etching time on the optical and structural properties of porous GaAs layer is demonstrated. The nano/micro-features of porous GaAs layers are revealed by scanning electron microscopy (SEM) imaging. Two-peak room temperature photoluminescence (PL), “blue-green” and “green-yellow”, is obtained in all prepared porous GaAs samples. Proper adjustment of etching time is found to produce a white color layer, instead of the usual dark gray color of porous GaAs. This is found to cause vast enhancement in the intensity of the visible PL in porous GaAs layer. Chemical composition and structural characterization by means of X-ray photoelectron spectroscopic (XPS), X-ray diffraction (XRD), and micro-Raman spectroscopy, confirm that this layer is characterized with monoclinic β-Ga₂O₃ rich surface. Etching time induced—modification of structural and chemical properties of porous GaAs layer is discussed and correlated to its PL behavior. It is inferred that the “blue-green” PL in porous GaAs can be ascribed to different degrees of quantum confinement in GaAs nanocrystallites, whereas, the “green-yellow” PL is highly influenced by the As₂O₃ and Ga₂O₃, content in the porous GaAs layer. In addition, the reflectance measurements reveal an anti-refection trend of behavior of porous GaAs layers in the spectral range (500–1,100 nm).     

Catalytic graphitization and formation of macroporous-activated carbon nanofibers from salt-induced and H2S-treated polyacrylonitrile

We present here a facile method to produce macroporous-activated carbon nanofibers (AMP-CNFs) by post-treating electrospun cobalt(II) chloride (CoCl₂) containing polyacrylonitrile (PAN/CoCl₂) nanofibers with hydrogen sulfide (H₂S) followed by carbonization. A range of techniques including scanning and transmission electron microscopy, FTIR and Raman spectroscopy is used to examine and characterize the process. Because of the phase behavior between carbon and cobalt, cobalt particles are formed in the nanofibers, some of which leave the fibers during the heat treatment process leading to macroporous fibrous structures. The number of the macroporous increase significantly with increasing CoCl₂ concentration in the precursor H₂S-treated PAN/CoCl₂ nanofibers. The cobalt phase in the fibers also leads to catalytic graphitization of the carbon nanofibers. The produced AMP-CNFs may be a promising candidates in many applications including anode layer in lithium ion batteries, air and liquid purifiers in filters, as well as in biomedical applications.     

Suppression of hydrogen-induced blisters in SK4 carbon steel alloy by friction stir processing

The feasibility of using friction stir-processing technique as a microstructural refining method for preventing hydrogen-induced blisters of SK4 carbon steel alloy containing microstructure of hard cementite particles in a ductile ferrite matrix was examined. Amount and size of hydrogen-induced blisters decreased in the stirred layers with increasing rotation speed and completely disappeared when rotation speed attained 400 rpm because of the formation of a hard and fine microstructure consisting of pearlite, martensite, and retained austenite instead of that containing hard spheroidized cementite particles in a soft ferrite matrix. Interfaces between ferrite matrix and cementite particles were the preferential sites for the hydrogen blisters initiation.     

Comparative study on oxidative decomposition behavior of vegetable oils and its correlation with iodine value using thermogravimetric analysis

A comparative study of oxidative decomposition behavior of a wide range of vegetable oils and its correlation to iodine value (IV) using thermogravimetric analysis (TGA) was described. The oxidative decomposition of saturated fatty acids shows weight loss before 385 degrees C while oxidative decomposition of unsaturated fatty acids shows lower rate of weight loss (dWt/dt) compared to saturated fatty acids due to the oxidation process ('up taking ' of oxygen) involving breaking down of double bond to form primary and secondary oxidation products, which leads to some weight gain in the sample before being decomposed. The relative differences in the dWt/dt (%/min) of the both fatty acids give different decomposition steps in TGA thermogram, enabling IV to be determined through the percentage weight loss of saturated fatty acids per 100% of total sample weight (excluding weight loss from moisture and volatile compounds). Therefore, TGA method can be used as an alternative method for IV determination with no sample pre-dilution and solvent consumption. Using the TGA methods, good correlation (r = 0.9889) with standard AOCS method was achieved.     

Structure,molecular orientation,and resultant mechanical properties in core/ sheath poly(lactic acid)/polypropylene composites

We study the coaxial spinning of poly(lactic acid) (PLA) with polypropylene (PP) in a core/sheath configuration. PP_core/PLA_sheath and PLA_core/PP_sheath fibers maintain the high breaking strength that PP and PLA exhibit individually, showing marked improvement in strength over previous reports of PP/PLA blend fibers. Crystalline morphologies are greatly affected by the location within the fiber (i.e., core, sheath, or spun individually), and hence, co-spinning provides a route to tailor the morphology and fiber diameter beyond that available with single component fibers. A new approach to estimate molecular orientation of core sheath fibers based on the tensile response of the fiber is developed, and indicates that co-spinning PP with PLA results in a synergistic effect with increases in the molecular orientation above that which is possible with spinning either PP or PLA individually.     

Shake Table Studies of a Concrete Bridge Pier Utilizing Pipe-Pin Two-Way Hinges

Pipe-pin two-way hinge details were recently developed by California Department of Transportation (Caltrans) to eliminate moments while transferring shear and axial loads from integral bridge bent caps to reinforced concrete bridge columns. The hinges consist of a steel pipe that is anchored in the column with an extended segment into the cap beam. There is no specific design guideline for these hinges, and the current design method is primeval and only controls shear failure of the steel pipe. In this study, a rational method is proposed on the basis of the possible limit states to obtain the lateral capacity of these hinges. To validate the proposed method, a large-scale two-column bridge pier model utilizing pipe-pin hinges was tested on a shake table. The model was subjected to increasing levels of one of the Sylmar-Northridge 1994 earthquake records. A comprehensive analytical modeling of the pier was also performed using OpenSees; for this purpose, a macro model was developed for pipe-pin hinges in this study. The experimental results confirmed that the hinges designed on the basis of the proposed guideline remain elastic with no damage. The good correlation between the analytical and experimental data indicated that the macro model and other modeling assumptions were appropriate.     

RAB10 Interacts with ABCB4 and Regulates Its Intracellular Traffic

ABCB4 (ATP-binding cassette subfamily B member 4) is an ABC transporter expressed at the canalicular membrane of hepatocytes where it ensures phosphatidylcholine secretion into bile. Genetic variations of ABCB4 are associated with several rare cholestatic diseases. The available treatments are not efficient for a significant proportion of patients with ABCB4-related diseases and liver transplantation is often required. The development of novel therapies requires a deep understanding of the molecular mechanisms regulating ABCB4 expression, intracellular traffic, and function. Using an immunoprecipitation approach combined with mass spectrometry analyses, we have identified the small GTPase RAB10 as a novel molecular partner of ABCB4. Our results indicate that the overexpression of wild type RAB10 or its dominant-active mutant significantly increases the amount of ABCB4 at the plasma membrane expression and its phosphatidylcholine floppase function. Contrariwise, RAB10 silencing induces the intracellular retention of ABCB4 and then indirectly diminishes its secretory function. Taken together, our findings suggest that RAB10 regulates the plasma membrane targeting of ABCB4 and consequently its capacity to mediate phosphatidylcholine secretion.     

Cooperative localization techniques for wireless sensor networks: free,signal and angle based techniques

This paper addresses the problem of localization in sensor networks where, initially, a certain number of sensors are aware of their positions (either by using GPS or by being hand‐placed) and are referred to as anchors. Our goal is to localize all sensors with high accuracy, while using a limited number of anchors. Sensors can be equipped with different technologies for signal and angle measurements. These measures can be altered by some errors because of the network environment that induces position inaccuracies. In this paper, we propose a family (AT‐Family) of three new distributed localization techniques in wireless sensor networks: free‐measurement (AT‐Free) where sensors have no capability of measure, signal‐measurement (AT‐Dist) where sensors can calculate distances, and angle‐measurement (AT‐Angle) where sensors can calculate angles. These methods determine the position of each sensor while indicating the accuracy of its position. They have two important properties: first, a sensor node can deduce if its estimated position is close to its real position and contribute to the positioning of others nodes; second, a sensor can eliminate wrong information received about its position. This last property allows to manage measure errors that are the main drawback of measure‐based methods such as AT‐Dist and AT‐Angle techniques. By varying the density and the error rate, simulations show that the three proposed techniques achieve good performances in term of high accuracy of localized nodes and less energy consuming while assuming presence of measure errors and considering low number of anchors. Copyright © 2012 John Wiley & Sons, Ltd.