Characterisation of the spoilage microbiota in raw salmon (Salmo salar) steaks stored under vacuum or modified atmosphere packaging combining conventional methods and PCR-TTGE

In order to characterise the spoilage related to microbiota of raw salmon, a combination of culture-dependent and -independent methods, including PCR–TTGE, was used to analyse 3 raw salmon batches stored for 3 days at chilled temperature in modified atmosphere packaging (MAP) (50% CO₂/50% N₂) or under vacuum. Sensory evaluation, microbiological enumeration and chemical analysis were performed after 3, 7 and 10 days of storage. At the onset of spoilage, 65 bacterial isolates were picked from the plates. Thus, 13 different genera or species were identified by phenotypic and molecular tests: Serratia spp., Photobacterium phosphoreum, Yersinia intermedia, Hafnia alvei, Buttiauxella gaviniae, Pseudomonas sp., Carnobacterium maltaromaticum, Carnobacterium divergens, Lactococcus piscium, Lactobacillus fuchuensis, Vagococcus carniphilus, Leuconostoc gasicomitatum and Brochothrix thermosphacta. The PCR–TTGE profiles and band identification enabled a shift of the dominant populations during the storage to be visualised for all the batches, probably due to the temperature change and the packaging. At the beginning of storage, Pseudomonas sp. dominated the raw salmon microbiota while in the following days (7 and 10), P. phosphoreum and L. piscium were identified as the main bacterial groups. This study enhances the knowledge of MAP and vacuum-packed raw salmon spoilage microbiota.     

Densified biomass can cost-effectively mitigate greenhouse gas emissions and address energy security in thermal applications

Regional supplies of biomass are currently being evaluated as feedstocks in energy applications to meet renewable portfolio (RPS) and low carbon fuel standards. We investigate the life cycle greenhouse gas (GHG) emissions and associated abatement costs resulting from using densified switchgrass for thermal and electrical energy. In contrast to the large and positive abatement costs for using biomass in electricity generation ($149/Mg CO(2)e) due to the low cost of coal and high feedstock and power plant operation costs, abatement costs for replacing fuel oil with biomass in thermal applications are large and negative (-$52 to -$92/Mg CO(2)e), resulting in cost savings. Replacing fuel oil with biomass in thermal applications results in least cost reductions compared to replacing coal in electricity generation, an alternative that has gained attention due to RPS legislation and the centralized production model most often considered in U.S. policy. Our estimates indicate a more than doubling of liquid fuel displacement when switchgrass is substituted for fuel oil as opposed to gasoline, suggesting that, in certain U.S. locations, such as the northeast, densified biomass would help to significantly decarbonize energy supply with regionally sourced feedstock, while also reducing imported oil. On the basis of supply projections from the recently released Billion Ton Report, there will be enough sustainably harvested biomass available in the northeast by 2022 to offset the entirety of heating oil demand in the same region. This will save NE consumers between $2.3 and $3.9 billion annually. Diverting the same resource to electricity generation would cost the region $7.7 billion per year. While there is great need for finding low carbon substitutes for coal power and liquid transportation fuels in the U.S., we argue that in certain regions it makes cost- (and GHG mitigation-) effective sense to phase out liquid heating fuels with locally produced biomass first.     

Polyphenol compounds in artichoke plant tissues and varieties

Polyphenol compounds, particularly caffeoylquinic acids and flavonoids, were measured in different tissues and developmental stages of 6 artichoke varietal types diffused in the Mediterranean region. Flower heads were subdivided into external, intermediate, internal bracts, and receptacle, while leaves were collected at the vegetative and productive stages. The main polyphenols detected were chlorogenic acid, cynarin, luteolin 7-O-rutinoside, and luteolin 7-O-glucoside. "Violet de Provence" artichoke proved to retain the highest content of total phenols. Single polyphenols accumulated preferentially in specific parts of capitula. In leaves, most polyphenols were detected in the productive stage of the plant. Altogether, results provide useful indications for the promotion of artichoke as nutraceutical food and for the extraction of health-promoting substances in particular tissues/stages of the artichoke plant. PRACTICAL APPLICATION: We describe the content of phenolic compounds in various artichoke tissues, developmental stages, and varieties. Results indicate that artichoke leaves represent an important source of these health-promoting compounds, also useful for phytopharmaceutical applications. A wider utilization of specific artichoke types should be strongly encouraged not only as a food for the fresh market, as they are now used, but also for the pharmaceutical industry, since the content of phenolic compounds is abundant both in the heads and in the leaves.     

Determination of the degree of substitution of hydrolysed octenylsuccinate-derivatised starch

Aim of the present study was to compare two methods for the determination of the degree of substitution of starch esterified with octenyl succinic anhydride (OSA). A maximum degree of substitution of 0.034 was analysed in commercial samples of hydrolysed OSA starch using a method based on acidification of the free carboxyl group of the OSA-starch molecule after its optimization. In contrast a high degree of substitution up to 0.134 was determined when analysing the same samples using a method based on saponification of the OSA groups. An interference with reducing sugars was hypothesized as possible reason and confirmed by control experiments using different reducing and non reducing low molecular weight carbohydrates.     

Low‐Cost Post‐Growth Treatments of Crystalline Silicon Nanoparticles Improving Surface and Electronic Properties

Freestanding silicon nanocrystals (Si‐ncs) offer unique optical and electronic properties for new photovoltaic, thermoelectric, and other electronic devices. A method to fabricate Si‐ncs which is scalable to industrial usage has been developed in recent years. However, barriers to the widespread utilization of these nanocrystals are the presence of charge‐trapping defects and an oxide shell formed upon ambient atmosphere exposure hindering the charge transport. Here, we exploit low‐cost post‐growth treatment routes based on wet‐etching in hydrofluoric acid plus surface hydrosilylation or annealing enabling a complete native oxide removal and a reduction of the defect density by up to two orders of magnitude. Moreover, when compared with only H‐terminated Si‐ncs we report an enhancement of the conductivity by up to a factor of 400 for films of HF etched and annealed Si‐ncs, which retain a defect density below that of untreated Si‐ncs even after several months of air exposure. Further, we demonstrate that HF etched and hydrosilylated Si‐ncs are extremely stable against oxidation and maintain a very low defect density after a long‐term storage in air, opening the possibility of device processing in ambient atmosphere.     

Inhibition of humic substances mediated photooxygenation of furfuryl alcohol by 2,4,6-trimethylphenol. Evidence for reactivity of the phenol with humic triplet excited states

To probe the reactivity of 2,4,6-trimethylphenol with humic triplet excited states, we investigated its influence on the humic substances-mediated photooxygenation offurfuryl alcohol. Elliott soil humic and fulvic acids were employed for these experiments. When added in the concentration range of 10(-4) - 10(-3) M, 2,4,6-trimethylphenol inhibited furfuryl alcohol photooxygenation to an extent depending on its concentration. The inhibiting effect decreased as the oxygen concentration was increased. By postulating that 2,4,6-trimethylphenol competes with oxygen for reaction with humic triplet excited states and with furfuryl alcohol for reaction with singlet oxygen, we obtained kinetic laws describing the consumption profiles of furfuryl alcohol and 2,4,6-trimethylphenol. Experimental rates of 2,4,6-trimethylphenol and furfuryl alcohol loss could be satisfactorily fitted with 1.09-1.16 for the ratio k2/k3, where k2 and k3 are the reaction rate constants of humic triplet excited states with oxygen and 2,4,6-trimethylphenol, respectively. These types of experiments could be extended to a variety of substrates to measure their reaction rate constants with humic triplet excited states.     

Ethanol oxidation on a high temperature PBI-based DEFC using Pt/C, PtRu/C and Pt3Sn/C as catalysts

A high temperature ethanol-fed polymer electrolyte membrane fuel cell has been implemented by using H₃PO₄-doped m-polybenzimidazole as polymeric electrolyte. Commercial Pt/C, PtRu/C and Pt₃Sn/C catalysts are used in the anode. The performance was assessed in terms of polarization curves at different temperatures, feeding the cell with a high concentration ethanol solution (water/ethanol mass ratio of 2). The product distribution was measured with the support of a gas chromatograph. The use of bimetallic catalysts increased the current density. PtRu/C showed the best performance up to 175 °C, but it is outperformed by Pt₃Sn/C at 200 °C. In terms of oxidation products, higher temperatures and current densities favour the oxidation of ethanol. However, Pt₃Sn/C promoted the generation of more oxidized products compared to PtRu/C (in which most of the ethanol is oxidized to acetaldehyde), especially at high temperature. This accounts for the large current density. In terms of complete oxidation of ethanol to CO₂, Pt/C was by far the most efficient catalyst for C–C scission, achieving percentages of 56 % of CO₂, although operating above 175 °C dramatically boosted an undesirable methanation process that slashed the efficiency. The combination of fuel cell results and product distribution helped to suggest the different oxidation routes on the surface of the different catalysts.     

Oscillatory CO Oxidation Over Pt/Al2O3 Catalysts Studied by In situ XAS and DRIFTS

Fresh and mildly aged Pt/Al₂O₃ model diesel oxidation catalysts with small and large noble metal particle size have been studied during CO oxidation under lean burn reaction conditions to gain more insight into the structure and oscillatory reaction behaviour. The catalytic performance, CO adsorption characteristics using in situ DRIFTS and oxidation state using in situ XAS were correlated. Stable and pronounced oscillations only occurred over the catalyst with smaller particle sizes. Characteristic for this catalyst are low-coordinated surface Pt sites (more corner and edge atoms) which seem to become oxidized at elevated temperature as evidenced by in situ DRIFTS and in situ XAS. In situ XAS further uncovered that the oxidation of the Pt surface starts from the end of the catalyst bed and the oxidation state oscillates like the catalytic activity.     

Distribution of Alpha Thalassaemia Gene Variants in Diverse Ethnic Populations in Malaysia: Data from the Institute for Medical Research

Alpha thalassaemia is highly prevalent in the plural society of Malaysia and is a public health problem. Haematological and molecular data from 5016 unrelated patients referred from various hospitals to the Institute for Medical Research for α thalassaemia screening from 2007 to 2010 were retrieved. The aims of this retrospective analysis were to describe the distribution of various alpha thalassaemia alleles in different ethnic groups, along with their genotypic interactions, and to illustrate the haematological changes associated with each phenotype. Amongst the patients, 51.2% (n = 2567) were diagnosed with α thalassaemia. Of the 13 α thalassaemia determinants screened, eight different deletions and mutations were demonstrated: three double gene deletions, – – ^SEA, – – ^THAI, ––^FIL; two single-gene deletions, α–^3.7 and – α^4.2; and three non-deletion mutations, Cd59G > A (haemoglobin [Hb] Adana), Cd125T > C (Hb Quong Sze) and Cd142 (Hb Constant Spring). A high incidence of α–^3.7 deletion was observed in Malays, Indians, Sabahans, Sarawakians and Orang Asli people. However, the – – ^SEA deletion was the most common cause of alpha thalassaemia in Chinese, followed by the α–^3.7 deletion. As many as 27 genotypic interactions showed 1023 α thalassaemia silent carriers, 196 homozygous α⁺ thalassaemia traits, 973 heterozygous α⁰ thalassaemia carriers and 375 patients with Hb H disease. Statistical analysis showed a significant difference in the distribution of α thalassaemia determinants amongst the various ethnic groups. Hence, the heterogeneous distribution of common determinants indicated that the introduction of an ethnicity-targeted hierarchical α thalassaemia screening approach in this multi-ethnic Malaysian population would be effective.