Modeling of friction-stir butt-welds and its application in automotive bumper impact performance Part 1. Thermo-mechanical weld process modeling

The demand for better structural performance in joining of components for road vehicles prompts the implementation of aluminum alloy friction stir welding technology in the automotive industry. The aim of current study is the creation of a 3-D finite element (FE) friction thermal model and stir welding (FSW) process of dissimilar aluminum alloy and for the estimation of crash worthiness performance of FSW fabricated shock absorber assembly. Thermo mechanical simulations and analysis are performed to understand the thermal behavior in the FSW weld zones. The developed models are correlated against published experimental results in terms of temperature profile of the weld zone. The developed models are then implemented for fabricating vehicle bumper parts to illustrate the performance of FSW welded components during an impact. Customary sled testing for low-speed guard necessities is performed utilizing a grating blend welded test apparatus at Wichita State University (WSU) at the National Institute for Aviation Research (NIAR). A few guard congregations are then appended to the test installation utilizing FSW and conventional Gas bend GMAW welding strategies. Numerical models are likewise created where limited component investigation is utilized to contrast the anticipated harm and the real harm maintained by both of the FSW and GMAW manufactured guards. During the research, a new FSW weld mold is created that allows for a better representation of the desired progressive crack propagation. The FSW fabricated bumper based on the Johnson-Cook failure model yields better failure prediction and is in good agreement to the test. The results from this study provide a guideline for an accurate finite element modeling of a FSW fabricated components and their application in the crashworthiness of such structural components.     

Effect of marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends

The effect of physical compatibilization on the deformation and coalescence of droplets in immiscible polymer blends is discussed. Evidence is provided for the existence of concentration gradients in block copolymers along the interface during deformation. This causes complex changes in droplet shapes during deformation and relaxation. These concentration gradients also result in Marangoni stresses, which stabilize the droplets against deformation and breakup. Coalescence experiments have been performed, varying both the compatibilizer concentration and the shear rate. Existing coalescence models have been evaluated. An empirical extension of Chesters' partially mobile interface model is presented, that treats the effects of Marangoni stresses on the coalescence process as a higher effective viscosity ratio.     

Review:Mg and Its Alloy——Scope, Future Perspectives and Recent Advancements in Welding and Processing

镁/镁合金焊接与加工的最新进展与未来展望

Sachin Kumar,武传松

（山东大学 材料科学与工程学院,济南 250061）

中文说明：

该文非常详细地综述了镁及镁合金的生产、加工及焊接的研究现状。尤其是在镁合金焊接部分,作者比较详细地阐述了熔化焊、激光焊、固相焊及钎焊等方法在镁合金焊接中的研究现状、存在问题与发展动向。该文对于镁合金焊接研究人员具有重要的参考价值。

关键词：镁;镁合金;加工;焊接;连接;最新进展

     

Tunable,Grating-Gated,Graphene-On-Polyimide Terahertz Modulators

An electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth is presented and it is exploited to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal grating used as a gate electrode, with an HfO₂/AlO_x gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. The authors achieve 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9–2.7 THz range. The modulator is then integrated with a multimode THz QCL. By adjusting the modulator operational bandwidth, the authors demonstrate that the graphene modulator can partially compensate the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the operational range, with 98 equidistant optical modes and a spectral coverage ~1.2 THz. This paves the way for applications in the terahertz, such as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and metrological tools for spectroscopy at THz frequencies.     

Artificial intelligence techniques and their application in oil and gas industry

Artificial Intelligence Review - Data are being continuously generated from various operational steps in the oil and gas industry. The recordings of these data and their proper utilization have...     

Parametric optimization of multiwalled carbon nanotube-assisted electric discharge machining of Al-10%SiCp metal matrix composite by response surface methodology

The demand for miniaturized products having a glossy surface or nano-level surface is increasing exponentially in automobile, aerospace, biomedical, and semiconductor industries. The mirror-like surface finish has generated a need to develop advanced machining processes. The addition of powder particle into electric discharge machining (EDM) oil is considered a promising technique to achieve surface integrity at the miniaturization level. In this research, the Al–10%SiC_p metal matrix composite (MMC) has been machined after mixing the appropriate amount of multiwalled carbon nanotubes (MWCNTs) into the EDM dielectric fluid. An advanced experimental setup has been designed and fabricated in the laboratory for conducting the experiments. This proposed technology is called nano powder mixed electric discharge machining (NPMEDM). The input parameters of NPMEDM are also optimized using central composite rotatable design (CCRD) based on response surface methodology (RSM) in order to obtain the best surface finish and material removal rate (MRR). The MRR has been increased by 38.22% and surface finish has been improved by 46.06% after mixing the MWCNTs into the EDM dielectric fluid. The results indicate that the combination of parameters A5, B5, C5, and D5 might have produced maximum MRR, whereas A1, B1, C1, and D3 have produced minimum surface roughness (SR).     

Removal of neutrophil gelatinase‐associated lipocalin by extracorporeal therapies

Neutrophil gelatinase‐associated lipocalin (NGAL) protein is an early biomarker for acute kidney injury (AKI). It is unknown if extracorporeal therapies (EC) have an effect on circulating NGAL levels. This study was designed to describe the kinetics of NGAL molecule in different EC techniques and to evaluate NGAL clearance in different operational conditions. A mock hemofiltration (HF) and hemoperfusion (HP) setup was used. NGAL was added to the blood reservoir and then measured at 30‐minute intervals from arterial, venous, and ultrafiltrate (UF) lines. Removal kinetics and NGAL sieving coefficient were calculated. In our experiments, baseline NGAL concentration averaged 452 μg/L. There was a consistent downward trend throughout the experiment. NGAL concentration in the UF was between 80 and 90 μg/L, though it showed a slight increase in the second hour. The sieving coefficient of NGAL ranged from 0.2 to 0.4 during HF and it appeared to increase with time, suggesting an initial effect of membrane adsorption. HP proved clearly that there was adsorption of NGAL by the membrane and the point of saturation occured at approximately 60 minutes from the start of circulation. Our evaluation demonstrates that NGAL can be adsorbed and ultrafiltrated with polysulfone membranes. This should be taken into consideration when using NGAL as an AKI biomarker in patients undergoing EC circulation.     

TrustTimeout后无线USB PTK的管理方法

根据无线USB规范1.0,在TrustTimeout(可信超时)后,旧的成对临时密钥(Pairwise Temporal Key,PTK)过期,需要更换.但该规范并没有明确定义何时应抛弃旧的PTK.在TrustTimeout后,无线USB主机可以立即删除PTK,或永久保留,也可以保留某段时间.本文根据这一特点提出了一种新的PTK管理方法.它有两个新颖之处:     

A review on current trends in potential use of metal-organic framework for hydrogen storage

Hydrogen can be a promising clean energy carrier for the replenishment of non-renewable fossil fuels. The set back of hydrogen as an alternative fuel is due to its difficulties in feasible storage and safety concerns. Current hydrogen adsorption technologies, such as cryo-compressed and liquefied storage, are costly for practical applications. Metal-organic frameworks (MOFs) are crystalline materials that have structural versatility, high porosity and surface area, which can adsorb hydrogen efficiently. Hydrogen is adsorbed by physisorption on the MOFs through weak van der Waals force of attraction which can be easily desorbed by applying suitable heat or pressure. The strategies to improve the MOFs surface area, hydrogen uptake capacities and parameters affecting them are studied. Hydrogen spill over mechanism is found to provide high-density storage when compared to other mechanisms. MOFs can be used as proton exchange membranes to convert the stored hydrogen into electricity and can be used as electrodes for the fuel cells. In this review, we addressed the key strategies that could improve hydrogen storage properties for utilizing hydrogen as fuel and opportunities for further growth to meet energy demands.     

Composite polymeric microsponge-based long-acting gel formulation for topical delivery of mupirocin

Topical delivery of medicaments in a controlled manner is still a promising area of research. Drug-containing dammar gum-ethyl cellulose composite microsponge loaded gel formulation (D-MSPG) was developed for controlled topical delivery of mupirocin. The drug-loaded microsponges (D-MSPs) were formulated by the quasi-emulsion solvent diffusion method and were evaluated for morphology, particle size distribution, entrapment efficiency, thermal properties, and crystallinity. The optimized D-MSPs (entrapment efficiency 91.5 ± 4.0% and particle size of 55.15 ± 2.9 μm) were dispersed in carbopol 934 gel (D-MSPG). The final product was characterized for pH, viscosity, texture, spreadability, consistency, syneresis, in vitro drug release, and ex vivo skin penetration study. A comparative study with marketed formulation was performed. For optimized gel formulation (G4), drug content was 104.19 ± 1.68%, and drug release was 84.19% after 24 h. The pH of the optimized gel was observed to be 6.05 ± 0.04. Viscosity of the optimized gel formulation was found to be 1212.15 ± 434.85 mPa-s at 50 s⁻¹. The steady-state flux (J) in ex vivo skin permeation was observed to be 53.96 μg cm⁻² h⁻¹ and the permeability coefficient was 2.69 cm/h for the optimized gel formulation. According to the findings, the D-MSPG-based formulation strategy can act well to prolong the topical delivery of mupirocin or similar drug molecules.