Large area CIGS2 thin film solar cells on foils: nucleus of a pilot plant

In earlier research, conversion efficiency of 10.4% (AM1.5) and 9.9% (AM0) has been achieved on small area CuIn_xGa_1−xS₂ (CIGS2) solar cell on 127 μm thick stainless steel substrate. The area of research is mainly focused on studying CIGS2 thin films as solar cell absorber material and growing high efficiency cells on ultralightweight and flexible metallic foils such as 127 μm thick stainless steel and SiO₂ coated 25 μm thick Ti foils. This paper presents the scaling up process of CIGS2 thin film substrate from 2.5 × 2.5 cm² to 10 × 10 cm². Initial scaling up efforts focused on achieving uniform thickness and stress-free films. Process of scaling up consisted of refurbishment of selenization/sulfurization furnace, design and fabrication of scrubber and enlargement of new CdS deposition setup. The scaling up from 2.5 × 2.5 cm² to 10 × 10 cm² substrate size has laid the foundation for PV Materials Lab of Florida Solar Energy Center becoming the nucleus of a pilot plant.     

Effect of Graphene Nanoplatelets Addition on the Mechanical,Tribological and Corrosion Properties of Cu–Ni/Gr Nanocomposite Coatings by Electro-co-deposition Method

Transactions of the Indian Institute of Metals - Nowadays, corrosion of metals is a major problem faced by marine, chemical and automobile industries. Therefore, several researchers are taking...     

Performance Evaluation of RF Energy Harvesting Circuit with DRA and Planar Antennas

Wireless Personal Communications - In this paper, we have proposed a lightweight blockchain based model to provide distributed authentication and anonymous authorization in IoD. We have proposed...     

Process Parametric Dependency of Axial Downward Force and Macro- and Microstructural Morphologies in Ultrasonically Assisted Friction Stir Welding of Al/Mg Alloys

Metallurgical and Materials Transactions A - An elementary analysis is proposed to quantify the effects of ultrasonic vibrations during friction stir welding (FSW) of AA6061-T6 to AZ31B Mg alloy....     

Active power flow control in a distribution system using discontinuous voltage controller

This paper proposes a hybrid discontinuous control methodology for a voltage source converter (VSC), which is used in an uninterrupted power supply (UPS) application. The UPS controls the voltage at the point of common coupling (PCC). An LC filter is connected at the output of the VSC to bypass switching harmonics. With the help of both filter inductor current and filter capacitor voltage control, the voltage across the filter capacitor is controlled. Based on the voltage error, the control is switched between current and voltage control modes. In this scheme, an extra diode state is used that makes the VSC output current discontinuous. This diode state reduces the switching losses. The UPS controls the active power it supplies to a three-phase, four-wire distribution system. This gives a full flexibility to the grid to buy power from the UPS system depending on its cost and load requirement at any given time. The scheme is validated through simulation using PSCAD.     

Study of formulation variables on properties of drug-gellan beads by factorial design

The aim of the present study was to obtain cross-linked calcium-gellan beads containing diclofenac sodium as model drug, using full 3(3) factorial design. Drug quantity, pH of cross-linking solution, and speed of agitation were selected as variables for factorial design. The resultant beads were evaluated by scanning electron microscopy (SEM), percent yield, entrapment efficiency, micromeritic properties, swelling and drug release studies. The drug-loaded beads were spherical with size range of 0.85-1.8 mm. Percent yield and entrapment efficiency of various batches were in the range of 86.48-98.28% w/w and 72.52-92.74% w/w, respectively. Calcium-gellan beads containing diclofenac sodium showed pH-dependent swelling and drug release properties. Swelling and drug release were significantly higher in pH 7.4 phosphate buffer than 0.1N HCl. The swelling ratio for beads was up to 22 and 3 for phosphate buffer and 0.1N HCl, respectively. Cumulative diclofenac sodium release from calcium-gellan beads was 12-35% in 0.1N HCl within 2 h, whereas complete drug release was observed within 3-4 h in pH 7.4 phosphate buffer.     

Formulation of ternary complexes of glyburide with hydroxypropyl-β-cyclodextrin and other solubilizing agents and their effect on release behavior of glyburide in aqueous and buffered media at different agitation speeds

Glyburide, a sulfonylurea derivative, widely used as hypoglycaemic agent. In the present study, an attempt has been made to investigate the most effective third component which can be used with hydroxylpropyl-β-cyclodextrin (HPβCd) to form a ternary complex with glyburide in order to enhance its dissolution rate, as well as reduce the amount of HPβCd used for formulating the binary complex with glyburide. Moreover, the objective of this study was also to develop a discriminatory dissolution media in order to discriminate the effect of the different solubilizing agents used for formulating the ternary complex system. Sodium lauryl sulphate, Poloxamer-188, Polyvinylpyrrolidone K-30, lactose and l-arginine were used to formulate ternary system along with HPβCd and glyburide. The ternary system formulated with glyburide:HPβCd:l-arginine in a proportion of 1:1:0.5 has shown the fastest dissolution rate when compared to other solubilizing agents. Unbuffered aqueous media with stirring speed 50?rpm has produced the most discriminatory dissolution profiles. The DSC thermograms and the powder X-ray analysis revealed the decrease in crystallinity of the drug. This was an indication of amorphous solid dispersion or molecular encapsulation of the drug into the cyclodextrin cavity.     

Molecular communication using Brownian motion with drift

Inspired by biological communication systems, molecular communication has been proposed as a viable scheme to communicate between nano-sized devices separated by a very short distance. Here, molecules are released by the transmitter into the medium, which are then sensed by the receiver. This paper develops a preliminary version of such a communication system focusing on the release of either one or two molecules into a fluid medium with drift. We analyze the mutual information between transmitter and the receiver when information is encoded in the time of release of the molecule. Simplifying assumptions are required in order to calculate the mutual information, and theoretical results are provided to show that these calculations are upper bounds on the true mutual information. Furthermore, optimized degree distributions are provided, which suggest transmission strategies for a variety of drift velocities.     

Sizing and control of trailing edge flaps on a smart rotor for maximum power generation in low fatigue wind regimes

An extension of the spectrum of applicability of rotors with active aerodynamic devices is presented in this paper. Besides the classical purpose of load alleviation, a secondary objective is established: optimization of power capture. As a first step, wind speed regions that contribute little to fatigue damage have been identified. In these regions, the turbine energy output can be increased by deflecting the trailing edge (TE) flap in order to track the maximum power coefficient as a function of local, instantaneous speed ratios. For this purpose, the TE flap configuration for maximum power generation has been using blade element momentum theory. As a first step, the operation in non‐uniform wind field conditions was analysed. Firstly, the deterministic fluctuation in local tip speed ratio due to wind shear was evaluated. The second effect is associated with time delays in adapting the rotor speed to inflow fluctuations caused by atmospheric turbulence. The increase in power generation obtained by accounting for wind shear has been demonstrated with an increase in energy production of 1%. Finally, a control logic based on inflow wind speeds has been devised, and the potential of enhanced power generation has been shown by time‐domain simulations. Copyright © 2015 John Wiley & Sons, Ltd.