Anticorrosion Potential of Flectofenine on Mild Steel in Hydrochloric Acid Media: Experimental and Theoretical Study

Journal of Failure Analysis and Prevention - The inhibition effect of Flectofenine on corrosion of mild steel in 1M HCl solution was investigated by using traditional weight loss method and...     

Periodically Fully Developed Heat and Fluid Flow Characteristics in a Furrowed Wavy Channel

Periodically fully developed two-dimensional (2D) flow in a furrowed wavy channel is investigated numerically at various Reynolds numbers (100–2123). For the laminar and transitional flow regime, the study is done for six geometrically different channels; corresponding to various nondimensional amplitude (0.05, 0.075, and 0.1) and wavelength (0.5 and 1). Critical Reynolds number—for the onset of periodic flow—decreases with increasing amplitude and wavelength. A flow regime map—demarcating steady and unsteady flow regime—is proposed. It is shown that the size of the vortex in streamlines and waviness in isotherms increase with increasing Reynolds number, amplitude and wavelength. The performance of wavy as compared to straight channel is studied with the help of ratio of Nusselt number, friction factor and area-goodness factor, and thermal-performance factor. With increasing Reynolds number, all these parameters remain almost constant in the steady regime and increase almost linearly in the unsteady regime. For the largest Reynolds number (close to 2000) studied here, the increase in the Nusselt number ratio—within the periodic flow regime—is 11.21% and 133% for the amplitude equal to 0.075 and 0.1, respectively, at a wavelength of 0.5; at a wavelength of 1.0, the increase is 101%, 134%, and 181% for the amplitude of 0.05, 0.075, and 0.1, respectively.     

Structural and Luminescence Studies on Barium Sodium Borosilicate Glasses Containing Uranium Oxides

Barium sodium borosilicate glasses containing different amounts of uranium oxides were prepared by conventional melt quench method and investigated for their structural aspects by ²⁹Si and ¹¹B MAS NMR technique combined with steady‐state luminescence and lifetime measurements. Based on MAS NMR studies, it is confirmed that uranium ions act as network modifier up to 15 wt% and beyond which a separate uranium containing phase is formed. From the luminescence studies, it is inferred that uranyl species is in a highly distorted environment. For more than 15 wt% uranium oxide incorporation, weaker U–O–U linkages are formed at the expense stronger U–O–Si/B linkages, as suggested by the excited state lifetime value of the uranyl species as well as red shift in emission peak maximum. For glass samples containing more than 25 wt% uranium oxides, crystalline barium uranium silicate gets phase separated from glass matrix as confirmed by XRD studies.     

Iodine speciation studies on Bunsen reaction of S–I cycle using spectroscopic techniques

Bunsen reaction is an important step of sulfur–iodine cycle for hydrogen production from thermochemical splitting of water. Polyiodide species generated during the separation process need to be identified for complete understanding of the mechanism involved. Speciation of these polyiodide species formed during Bunsen reaction can lead to better understanding of kinetics of the process. HIx species formed have been analyzed using UV–visible and Raman spectroscopic techniques. Peak corresponding to HI₃ species have been ascertained and their conversion to higher HI₅, HI₇ …… species has been observed.     

FTIR micro‐reflectance absorption spectroscopic analysis of chemisorbed reaction films for tribological applications

Chemisorbed reaction films (CRFs) were prepared by using iron (Fe) particles (100–200 mess size) and thio (sulfur) derivatives of ethyl octadecenoate and methyl 12‐hydroxy octadecenoate in the light viscosity paraffin liquid medium. The reaction was conducted in a simulated condition of tribo‐chemical situation. CRFs were obtained in solid amorphous phase. The CRFs were examined for elemental composition and layer analysis using C‐H‐N‐O‐S analyzer and Fourier transform infrared spectroscopy micro‐reflectance absorption spectroscopic technique. Further, the CRFs were isolated into organic solvent soluble fractions using polar solvents of increasing polar strength. Their elemental analyses were studied, and chemical constitutions were known. Friction coefficient and wear scar diameter were evaluated by high frequency reciprocating rig, PLINT TE‐77 machine. Thermal stability was studied using thermogravimetric analysis technique in nitrogen environment. These studies inferred that CRFs appeared varying in its composition, luster, phase, chemical structure and thermal stability. Nonetheless, these were also found anomalous in elemental distribution throughout the layer structure of the CRFs. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of heating the catalytic converter on emission characteristic of gasoline automotive vehicles

Gasoline engines have been widely used as engineering machinery, automobile and shipping power equipment due to their excellent drivability and economy. At the same time, gasoline engines are major contributors to various types of air pollutants such as carbon monoxide (CO), oxides of nitrogen (NO_x), and other harmful compounds. With the increasing concern of environment and more stringent government regulation on exhaust emissions, the reduction in engine emissions such as particulate matter and NO_x is a major research objective in engine development. In this article the effect of heating the catalytic converter on emission characteristic of automotive vehicles in its starting phase of combustion has been studied. In this work, the emission characteristic of hydrocarbons has been improved from 800 to 15 ppm, CO from 4 to 0.07 (V/V%) and NO_x from 1200 to 115 ppm.     

Occurrence and Source Apportionment of Polycyclic Aromatic Hydrocarbons in Urban Residential Soils from National Capital Region,Uttar Pradesh,India

This study aims to investigate the level of priority polycyclic aromatic hydrocarbons (PAHs) and identification of their potential sources in residential soils. During the study, a total 36 soil samples collected from twelve residential locations at Sahibabad-Ghaziabad area of western Uttar Pradesh, India, a constituted part of the National Capital Region of India. Samples extracted using ultrasonication, cleaned with silica and analyzed by diode array detector–high-performance liquid chromatography using acetonitrile/water as mobile phase. The 25th and 75th percentile concentration of ∑PAHs was 264 μg kg^?1 and 584 μg kg^?1, respectively, with mean and median of 445 μg kg^?1 and 421 μg kg^?1. The detection frequency of PAHs in all samples was lower for low molecular weight PAHs (19%) than high molecular weight PAHs (81%). The concentration of seven probable carcinogenic PAHs accounted for 67% of the ∑PAHs. PAHs toxicity potential as benzo(a)pyrene toxicity equivalent ranged between 2.52–253 μg BaP_TEQ kg^?1. Composition profile of PAHs with different aromatic rings and selected diagnostic molecular ratios suggested the local pyrogenic sources of PAHs from vehicular emissions, diesel engines, biomass combustion, gasoline, and coal combustions.     

Assessment of Interface Trap Charges on Proposed TFET for Low Power High-Frequency Application

Silicon - Accumulation of trap charges at the semiconductor and oxide interface is the most dominating factor and cannot be neglected as it degrades device performance and reliability. This...