Compression molding and melt‐spinning of the blends of poly(lactic acid) and poly(butylene succinate‐co‐adipate)

Poly(lactic acid) (PLA) is a biobased polymer made from biomass having high mechanical properties for engineering materials applications. However, PLA has certain limited properties such as its brittleness and low heat distortion temperature. Thus, the aim of this study is to improve toughness of PLA by blending with poly(butylene succinate‐co‐adipate) (PBSA), the biodegradable polymer having high toughness. Polymer blends of PLA and PBSA were prepared using a twin screw extruder. The melt rheology and the thermal property of the blends were examined. Further the blends were fabricated into compression molded parts and melt‐spun fiber and were subjected to tensile and impact tests. When the PBSA content was low, PBSA phase was finely dispersed in the PLA matrix. On the other hand, when the PBSA content was high, this minor phase dispersed as a large droplet. Mechanical properties of the compression molded parts were affected by the dispersion state of PBSA minor component in PLA matrix. Impact strength of the compression molded parts was also improved by the addition of soft PBSA. The improvement was pronounced when the PBSA phase was finely dispersed in PLA matrix. However, the mechanical property of the blend fibers was affected by the postdrawing condition as well as the PBSA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41856.     

Well‐Defined End‐Functionalized Conjugated Polymers/Oligomers Exhibiting Unique Emission Properties through the End Groups: The Exclusive Synthesis by Combined Olefin Metathesis with Wittig‐type Coupling

Acyclic diene metathesis polymerization using ruthenium–carbene catalysts affords defect‐free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The exclusive end‐functionalization in the resultant poly(fluorene vinylene)s or poly(phenylene vinylene)s can be attained by treating the vinyl end groups using a molybdenum–alkylidene catalyst/reagent (through olefin metathesis) followed by addition of various aldehydes (Wittig‐type coupling). Some of these end‐modified conjugated materials display unique emission properties, which are different from the original ones, through an interaction (energy transfer or structural change in the excited state) between the conjugated main chain and the end groups [oligo(thiophene)s, F‐BODIPY, etc.]. Exclusive synthesis of well‐defined, all‐trans end‐functionalized oligo(2,5‐dialkoxy‐1,4‐phenylene vinylene)s [(oligo(phenylene vinylene), alkoxy = O(CH₂)₂OSiⁱ Pr₃, up to 31 repeat units] is demonstrated by adopting a stepwise synthetic approach (olefin metathesis and the subsequent Wittig‐type cleavage). It is clearly demonstrated that their optical properties (especially the fluorescence spectra including photoluminescence quantum yields) are strongly affected by the end groups as well as the conjugation repeat units.     

Efficacy of Chemical Mimicry by Aphid Predators Depends on Aphid-Learning by Ants

Chemical mimicry is an effective strategy when signal receivers recognize and discriminate models by relying on chemical cues. Some aphid enemies mimic the cuticular chemicals of aphids through various means thus avoiding detection and attack by aphid-tending ants. However, because ants have been reported to learn the chemical signatures of aphids in order to distinguish the aphids, the efficacy of chemical mimicry is predicted to depend on the experience of the ants that had tended aphids. The present study tested this hypothesis using two predator species: larvae of the green lacewing Mallada desjardinsi, and larvae of the ladybeetle Scymnus posticalis. Lacewing larvae carry the carcasses of aphids on which they have preyed upon their backs, and these function via chemical camouflage to reduce the aggressiveness of aphid-tending ants toward the larvae. Ladybeetle larvae reportedly produce a covering of wax structures, and their chemicals appear to attenuate ant aggression. We examined whether the behavior of the ant Tetramorium tsushimae toward these predators changed depending on their aphid-tending experience. Ants moderated their aggressiveness toward both predators when they had previously tended aphids, indicating that chemical mimicry by both aphid predators is dependent on previous experience of the ants in tending aphids. Chemical mimicry by the predators of ant-tended aphids is therefore considered to exploit learning-dependent aphid recognition systems of ants.     

A multilevel PWM strategy suitable for high‐voltage motor direct drive systems with consideration of the adverse effect of dead time

Recently, high‐voltage motor direct drive systems have been put to practical use, and various multilevel PWM strategies have also been proposed. This paper describes a multilevel PWM strategy [our group calls it the Carrier Phase Selection Method (CPS)] that has the lowest line voltage harmonic distortion in order to prevent the degradation of high‐voltage motor winding insulations. This method takes the adverse effect of dead time into consideration, and it controls the shift direction of a carrier phase. Therefore, a favorable output waveform without instantaneous voltage surges is achieved even if the line voltage level changes. Moreover, the switching transitions across all switching devices are well‐balanced, so the utilization of inverter unit cells is equalized. This is an important factor when designing the entire system. Based on simulation and experimental results, it is shown that this CPS method is particularly effective in high‐voltage motor direct drive systems. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(2): 77–88, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20474     

Room temperature continuous wave operation of GaInP/AlInP visible-light laser with GaInP/AlInP superlattice confinement layer grown by gas source molecular beam epitaxy

A remarkable threshold current density reduction (from 3.5 kA/cm/sup 2/ to 1.6 kA/cm/sup 2/) of GaInP/AlInP visible light lasers grown by gas source molecular beam epitaxy (GS-MBE) was obtained by introducing 50 pairs of GaInP(7.1 AA)/AlInP(7.1 AA) short period superlattice confinement (SLC) layers. As a result, the room temperature continuous wave (CW) operation was obtained at 669 nm with a minimum threshold current of 50 mA and maximum light output of 10.5 mW.<>     

Instability of the Solid-Liquid Interface of 4He during a Large Transformation

We report an instability of ⁴He crystal surface during a large modification of its shape observed by schlieren photography. ⁴He crystal was nucleated on an ultrasound transducer which was placed in the upper part of the sample cell facing the bottom. The crystal was grown on the transducer and the lowest part of it eventually touched the bottom of the cell. Almost immediately, the crystal started to change shape very quickly to adjust itself to the new boundary condition. During this large deformation, the hexagonal shape of the crystal surrounded by facets became unstable and the surface became corrugated. The corrugation pattern during the deformation was observed by a high-speed camera. The results were compared with Kelvin-Helmholtz type instability which Uwaha and Nozières predicted.      

Electrolytic removal of ammonia from brine wastewater: scale‐up,operation and pilot‐scale evaluation

Brine wastewater with a high ammonia content from an iodine processing plant (commonly called kansui in Japan) was treated by electrolysis. The system, which can be considered as an indirect electrolytic treatment process, generates chlorine at the anodes and initiates the formation of mixed oxidants like hypochlorous acid. The oxidants then act as agents for ammonia destruction. Laboratory‐scale experiments showed that high ammonia concentrations (as much as 200 mg dm^?3) could be completely removed within a few minutes, and could be considered a good alternative for efficient ammonia removal from saline wastewaters. From laboratory‐scale experiments in the batch and continuous modes, the charge dose was analyzed and used as the operating and scale‐up factor. The value of the charge dose was not severely affected by changes in operating conditions such as electrode spacing and temperature. The charge dose from batch and continuous runs was found to be in the range of 23 C (mg NH₄‐N removed)^?1 to 29 C (mg NH₄‐N removed)^?1. Using the charge dose obtained from laboratory‐scale continuous electrolysis experiments as the scale‐up factor, a pilot‐scale reactor was designed, and the operating conditions were calculated. In the pilot‐scale reactor tests at different flow rates, the effluent ammonia concentrations were reasonably close to the calculated values predicted from the charge dose equation. Copyright © 2004 Society of Chemical Industry     

Isolated Schwann cells can synthesize the basement membrane in vivo

The purpose of the present study is to examine whether isolated Schwann cells that are not in contact with axons can synthesize the basement membrane in vivo. Schwann cells obtained from sciatic nerve of neonate Wistar rats were prepared in culture, harvested, and mixed with collagen matrix. The silicone tube filled with the collagen matrix containing Schwann cells was closed by a Millipore membrane at both ends to isolate the interior from the outer environment and was implanted in a gap between proximal and distal stumps of transected sciatic nerve of an adult Wistar rat. Ten days later, the implanted silicone tube was prepared for electron microscopic observations. Schwann cells in the tube were elongated longitudinally and lined up parallel to the proximo-distal direction. No regenerating axons penetrated the Millipore membrane into the tube. The basement membrane showing almost normal structure was produced on the surface of the Schwann cells. While the silicone tube was placed side by side to the intact sciatic nerve, Schwann cells in the tube were scattered and no basement membrane was observed. These results suggest that some humoral factors might be released from the transected nerve stumps, which may be responsible for the regular arrangement and the basement membrane formation by Schwann cells without any contact with axons.     

Syntheses of alpha-arbutin-alpha-glycosides and their inhibitory effects on human tyrosinase

Alpha-arbutin is a tyrosinase inhibitor. We synthesized alpha-arbutin-alpha-glycosides by the transglycosylation reaction of cyclomaltodextrin glucanotransferase from Bacillus macerans using alpha-arbutin and starch as acceptor and donor molecules, respectively. We isolated and characterized two major products from the reaction mixture. The structural analyses using 13C- and 1H-NMR spectroscopy proved that they were 4-hydroxyphenyl alpha-maltoside (alpha-Ab-alpha-G1) and 4-hydroxyphenyl alpha-maltotrioside (alpha-Ab-alpha-G2). Both alpha-Ab-alpha-G1 and alpha-Ab-alpha-G2 exhibited competitive-type inhibition on human tyrosinase as alpha-arbutin does. Their K(i) values were calculated to be 0.6 mM and 2.8 mM, respectively, which is slightly and significantly higher than that of alpha-arbutin (0.2 mM).     

Growth of bubbles containing plasma in water by high-frequency irradiation

Plasma was generated in water by irradiation at high frequency of 13.56 MHz, and the behavior of bubbles including the plasma was observed by a high-speed camera. The generation pattern of the bubbles was classified into four types according to liquid temperature and supplied power. Conducting the simulation, the maximum temperature in the bubble was found to be from 3500 K to 4300 K, and the decomposition of water molecule occurred. The gas in the bubble was found to become high ratio of hydrogen. The phenomenon can be regarded as a film boiling of exceptionally high heat flux.