Effect of active oxygen species on the productivity of torularhodin by Rhodotorula glutinis No. 21

The effect of active oxygen species on the productivity of torularhodin, an effective antioxidant, by soil yeast, Rhodotorula glutinis no. 21, was examined. Methylene blue, methyviologen and AAPH [2,2'-azobis(2-amidinopropane) dihydrochloride] were used as generators of singlet oxygen, superoxide anion radicals and peroxy radicals, respectively. All of them indicated effectiveness at a dose of 1.0 x 10(-10) to 3.0 x 10(-6) M. Addition of these generators to the culture medium had almost no influence on the biosynthesis of beta-carotene, whereas it had marked enhancement on those of torulene and torularhodin. Production of uric acid by xanthineoxidase remained unchanged at a torularhodin concentration of up to 100 microM. This result suggests that torularhodin does not directly affect the productivity of superoxide anions. It has been proved that torularhodin has a more potent effect on the scavenging of peroxyl radicals and inhibits substrate degradation by singlet oxygen more effectively than beta-carotene does. Continuous addition of methylene blue enhanced the torularhodin accumulation more markedly than single addition.     

Composition dependence of young’s modulus in Ti-V, Ti-Nb, and Ti-V-Sn alloys

The Young’s modulus of Ti-V and Ti-V-Sn alloys quenched from the β-phase region after solution treatment and cold rolling was investigated in relation to alloy compositions, microstructures, and constituent phases. The composition dependence of the Young’s modulus for quenched Ti-V binary alloys shows two minima of 69 GPa at Ti-10 mass pct V and 72 GPa at Ti-26 mass pct V. Between the two compositions, athermalω or stress-induced ω is introduced in retainedβ phase and increases Young’s modulus. That is, a low Young’s modulus is attained unless alloys undergoω transformation. In Ti-5 and -8 mass pct V, which under goα′ (hcp) martensitic transformation on quenching, the Young’s modulus further decreases by cold rolling, which can be reasonably explained by the formation ofα′ rolling texture. Comparing Young’s modulus in Ti-V binary alloy with that in Ti-Nb binary alloy, it is found that Young’s modulus is remarkably increased by athermal- or stress inducedω phase, and it shows a minimum when both martensitic andω transformation are suppressed during quenching in metastableβ alloys. The Sn addition to Ti-V binary alloy retards or suppresses athermal and stress-inducedω transformation, thereby decreasing Young’s modulus. Young’s modulus exhibits minimum values of 51 GPa in quenched (Ti-12 pct V)-2 pct Sn and of 57 GPa in cold-rolled (Ti-12 pct V)-6 pct Sn.     

High levels of transforming growth factor beta 1 in patients with colorectal cancer: association with disease progression

BACKGROUND & AIMS: Contribution of transforming growth factor beta 1 (TGF-beta 1) to tumor progression has been suggested. However, little is known about the role of TGF-beta 1 in colorectal cancer. Plasma TGF-beta 1 levels and its expression were analyzed in patients with colorectal cancer. METHODS: Plasma TGF-beta 1 levels were measured in 22 patients with colorectal cancer using a TGF-beta 1 enzyme-linked immunosorbent assay. Expression of TGF-beta 1 messenger RNA and immunohistochemical distribution of the protein in colorectal cancer tissues were examined. RESULTS: Plasma TGF-beta 1 levels in patients with colorectal cancer (14.8 +/- 8.4 ng/mL) were significantly higher than in normal controls (1.9 +/- 1.4; n = 22) (P < 0.001). After curative surgical resection, plasma TGF-beta 1 levels decreased in examined patients from 11.9 +/- 6.7 to 3.8 +/- 1.2 ng/mL (P < 0.01). TGF-beta 1 messenger RNA was about 2 1/2 times more abundant in colorectal cancer tissues than in control (P < 0.01). TGF-beta 1 was detected in the cytoplasm of colorectal cancer cells immunohistochemically. Both TGF-beta 1 messenger RNA expression in colorectal adenocarcinoma tissues and its plasma levels were associated with tumor stage of Dukes' classification (P < 0.05). CONCLUSIONS: These results suggest that plasma TGF-beta 1 levels may reflect overexpression of the gene in colon cancer tissues and are associated with disease progression.     

Elasto-plastic analysis of orthogonally stiffened plates with initial imperfections under uniaxial compression

In general, the stiffened plates consisting of steel plate elements are unavoidably accompanied by initial imperfections such as residual stresses and initial deflections, which have considerable effects on their ultimate strength. Therefore, it is needed for designing them to develop more rational method taking the ultimate strength influenced by initial imperfections into account rather than the conventional design method being on the basis of the linear elastic buckling theory.From this point of view, this study aims to evaluate rigorously the ultimate strength of orthogonally stiffened plate with initial imperfections under uniaxial in-plane compression. The elasto-plastic finite element method is applied to attain this purpose. By a happy combination of modal analytical technique and conventional finite element method, much reduction of the degree of freedom can be expected to be realized herewith. Some numerical calculations are performed by means of this rigorous method to examine the exactness of the analysis. Moreover, the numerical results are compared with the experimental ones.     

Cover Picture: Assembly and Photoinduced Organization of Mono‐ and Oligopeptide Molecules Containing an Azobenzene Moiety (Adv. Funct. Mater. 9/2007)

An illustration of the phototriggered organization and dispersion of tri‐peptide‐substituted azobenzene derivatives, as reported on p. 1507 by Yoko Matsuzawa and co‐workers. The tri‐peptide units form a beta‐sheet structure through hydrogen bonding to assemble a fibrous network system. Cis–trans photoisomerization of the azobenzene moiety leads to a large polarity change of the component molecule to break and re‐form hydrogen bonds between the tri‐peptide units. Assembled systems consisting of an azobenzene moiety as the photofunctional component and valyl units as the network backbone are investigated. The molecular ordering of these assemblies is examined by spectroscopy and theoretical calculations. The number of valyl units greatly influences the molecular order in the organized systems. Only N‐(L ‐valyl‐L ‐valyl‐L ‐valyl)azobenzene‐4‐carboxamide ( 3 ) forms a complete β‐sheet structure in this artificial assembly. Upon photoirradiation, the azobenzene moieties isomerize completely, revealing the reversibility in the structural organization through the flexibility of the β‐sheet network in this system.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.     

A background optimization method for PLL by measuring phase jitter performance

This paper describes a background (BG) optimization method for a phase-locked loop (PLL) by changing the circuit parameters of the PLL circuits. Measuring the phase shift of the voltage-controlled oscillator (VCO) at each input reference clock, we can determine the phase jitter performance with accuracy equal to a time interval analyzer (TIA). Using the combination of the global optimization method at initial stage and the local optimization method for the background calibration always gives the PLL the smallest jitter performance under process variation, supply voltage modulation, and temperature variation. The test environment fabricated by the 0.15-/spl mu/m CMOS controlled by an external FPGA demonstrates enough ability to suppress the impacts of the environmental variations.     

Enzymatic enrichment of arachidonic acid from Mortierella single-cell oil

An attempt was made to enrich arachidonic acid (AA) from Mortierella single-cell oil, which had an AA content of 25%. The first step involved the hydrolysis of the oil with Pseudomonas sp. lipase. A mixture of 2.5 g oil, 2.5 g water, and 4000 units (U) Pseudomonas lipase was incubated at 40°C for 40 h with stirring at 500 rpm. The hydrolysis was 90% complete after 40 h, and the resulting free fatty acids (FFA) were extracted with n-hexane (AA content, 25%; recovery of AA, 91%). The second step involved the selective esterification of the fatty acids with lauryl alcohol and Candida rugosa lipase. A mixture of 3.5 g fatty acids/lauryl alcohol (1:1, mol/mol), 1.5 g water, and 1000 U Candida lipase was incubated at 30°C for 16 h with stirring at 500 rpm. Under these conditions, 55% of the fatty acids were esterified, and the AA content in the FFA fraction was raised to 51% with a 92% yield. The long-chain saturated fatty acids in the FFA fraction were eliminated as urea adducts. This procedure raised the AA content to 63%. To further elevate the AA content, the fatty acids were esterified again in the same manner with Candida lipase. The repeated esterification raised the AA content to 75% with a recovery of 71% of its initial content.     

Simulation of thermophysical flow in axisymmetric nozzle with expansion chamber

Axisymmetric nozzle flows with a free‐jet expansion are simulated considering several substances and several flow conditions, and the thermophysical properties in the nozzle and the free‐jet region are predicted. The present numerical method is based on the preconditioning method developed by Yamamoto and the mathematical models of thermophysical properties of the substances. As numerical examples show, gas flows of carbon dioxide, water, and nitrogen under a subcritical pressure condition are first calculated. Calculated distances to the Mach disk are compared with the experimental results, and also the density distributions are compared among these three substances. Second, carbon dioxide flows while changing the pressure from subcritical to supercritical values are calculated and the effect of pressure on the flow field is investigated. Third, flows of water vapor with and without nonequilibrium condensation are calculated and the effect of condensation on the flow field is investigated. © 2010 American Institute of Chemical Engineers AIChE J, 2011