Leaching behavior of heat-treated waste ash

The leaching behavior of heat-treated waste ash was studied to verify the possibility of the thermal treatment of waste incineration ash in existing incinerators and boiler combustion chambers. The influence of temperature, oxygen concentration and treatment time on the leaching behaviors of harmful heavy metals, especially lead (Pb) and chromium(VI) (Cr (VI)) were studied to clarify effective treatment conditions to suppress leaching. By examining the leaching behavior of Pb and Cr from ash heat-treated under various conditions, it was found that leaching can be suppressed by heat-treating the ash under conventional combustion conditions of around 900-1000 °C at 5-10% oxygen concentration. The leaching behaviors of Pb and Cr (VI) from real ash with different particle sizes and from model samples were also investigated in detail to find an effective method to suppress Pb leaching. It was found that the formation and growth of gehlenite (SiO₂·2CaO·Al₂O₃) in the ashes led to the decrease in the amount of Pb leaching. Therefore it was considered that the addition of an inorganic matrix with a high silica content that can promote gehlenite growth in the ash, for example, coal ash or waste glass is effective to suppress of Pb leaching.     

Intramolecular hydrogen bonding (proton transfer) of 1-phenyl-1,3-butanedione

Through the (1)H and (13)C NMR measurements for the symmetrical beta-diketones such as 2,4-pentanedione and 1,3-diphenyl-1,3-propanedione and unsymmetrical one such as 1-phenyl-1,3-butanedione at various concentrations and temperatures, we confirmed that 1-phenyl-1,3-butanedione in CDCl(3) exists as monomers in its relatively low concentration. In addition, the 1-phenyl-1,3-butanedione in CDCl(3) exists not as a keto-form but as two kinds of cis-enol forms. The proton transfer between the two kinds of cis-enols for 1-phenyl-1,3-butanedione was discussed thermodynamically; it is concluded that the OH proton of enol of 1-phenyl-1,3-butanedione is considerably located near the oxygen atom attached to the carbon atom linking to a phenyl group.     

Culture characteristics of carotenoid-producing filamentous fungus T-1, and carotenoid production

The culture characteristics, carotenoid production, and associated biosynthetic pathway of strain T-1 were examined. As a result of examining the culture temperature and light irradiation, an increase of neurosporaxanthin and neurosporaxanthin beta-D-glucopyranoside was observed at a low temperature and 0 lx. It was suggested that highly polar carotenoids, such as neurosporaxanthin, and carotenoid glycosides were involved in the stabilization of membrane during nutrition storage other than the defense function of fungus bodies. Strain T-1 produced lycopene, beta-carotene, gamma-carotene, torulene, neurosporaxanthin, and neurosporaxanthin beta-D-glucopyranoside, as assessed by HPLC, LC-MS, and NMR analysis. Carotenoid biosynthesis begins with neurosporene, passing to lycopene and gamma-carotene through cyclization, and produces beta-carotene. In addition, it is saturated, gamma-carotene is converted to torulene, and neurosporaxanthin is produced. Thus, the carotenoid biosynthetic pathway in strain T-1 was estimated.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Control of swelling height of Si crystal by irradiating Ar beam

It has been found that ion implantation can induce a swelling (step-height) phenomenon on crystal surface. In this paper, we studied about the control of swelling height of Si crystal by irradiating Ar beam under various parameters (fluence, charge and energy). These irradiation parameters were regulated by an irradiation facility that enables to achieve the multiple ionization. For both charges, the swelling height was studied with the various fluencies of two different charges Ar(1+) and Ar(4+). The swelling height increased with increasing the fluence. The swelling height was also studied by changing energy of Ar(4+) beam. The swelling height increased by increasing the energy. The obtained swelling heights are understood base on the contribution of ion-beam induced defect, which is evaluated by SRIM. By comparing with the previous results, it was found that the expansion phenomena also depend on irradiated ion. The swelling structures were found to be stable more than two months. The present results have shown that this method of producing swelling structure indicates the potential application to fabricate 3-D nanostructure.     

Continuous separation of molybdenum and zirconium from simulated high-level liquid waste with a Taylor–Couette contactor

Reprocessing of spent nuclear fuels generates high-level liquid waste (HLLW) which undergoes vitrification into borosilicate glass before final geological disposal. To ensure the quality of the glass, control of the concentration of chemical species such as molybdenum (Mo), which has an adverse impact on the vitrification process, is critical. Also, zirconium (Zr) can cause crud in washing process and Zr-93 is a long-lived fission product needed to be separated. In this study, a liquid–liquid countercurrent centrifugal contactor with Taylor–Couette flow (TC contactor) was applied to practical multi-species cases. Continuous separation of Mo and Zr from a simulated HLLW with bis(2-ethylhexyl) phosphoric acid (HDEHP) as extractant has been performed. Among a variety of metals in simulated HLLW, Mo, Zr, Y, and Fe are extractable, Mo and Zr were separated from HLLW by equilibrium, and Fe/Y separation was achieved by the effect of non-equilibrium state in TC contactor. Addition of tributyl phosphate could improve extraction of Mo. This study has expanded the scope of the TC contactor to multi-species separation processes.     

NR5A1 is required for functional maturation of Sertoli cells during postnatal development

The orphan nuclear receptor steroidogenic factor 1 (NR5A1 (SF-1)) is expressed in both Sertoli and Leydig cells in the testes. This study investigates the postnatal development of the testes of a gonad-specific Nr5a1 knockout (KO) mouse, in which Nr5a1 was specifically inactivated. The KO testes appeared histologically normal from postnatal day 0 (P0) until P7. However, disorganized germ cells, vacuoles, and giant cells appeared by P14 in the seminiferous tubules of KO but not control mice. Expression of NR5A1 and various factors was examined by immunohistochemistry (IHC). The number of NR5A1-positive Sertoli cells in the KO testes was lower compared with controls at all the developmental stages and decreased to nearly undetectable levels by P21. IHC for anti-Müllerian hormone and p27, immature and mature Sertoli cell markers, respectively, indicated a delay in Sertoli cell maturation in the KO testes. The number of Sertoli cell-expressing factors involved in Sertoli cell differentiation including WT1, SOX9, GATA4, and androgen receptor were lower in the KO testes compared with controls. Furthermore, fewer proliferating cell nuclear antigen-positive proliferative germ cells were observed, and the number of TUNEL-labeled cells was significantly higher in the KO testes compared with controls at P14 and P21, indicating impaired spermatogenesis. IHC for CYP11A1 (SCC) indicated the presence of steroidogenic Leydig cells in the interstitium of the KO testes at all stages examined. These results suggest that NR5A1 is essential for Sertoli cell maturation and therefore spermatogenesis, during postnatal testis development.     

Shock sensitivity of blasting explosive cartridges

Abstract

The undersand variable gap–initiator test was applied to most Japanese blasting explosive cartridges and found useful as the sensitivity test for the cartridges. The recent Japanese watergel and emulsion explosives were shown to be more shock–sensitive than previous ones. The blast noise in the undersand explosion was shown to decrease when the depth of sand cover the cartridge was increased. For 100g of explosive, a sand layer 20cm deep was effective in reducing the blast noise, when the depth of the sand layer was increased, there was no additional effect. All blasting explosives excluding Kuro Carlit were not ignited by a small gas flame. A cartridge of 100g Kuro Carlit was ignited undersand but did not show the phenomenon of deflagration to detonation     

Lipid composition of platelets from patients with atherosclerosis: Effect of purified eicosapentaenoic acid ethyl ester administration

Although eicosapentaenoic acid (EPA) has been shown to have beneficial effects in the prevention of atherosclerosis, the mechanism by which these effects occur is not entirely clear. We investigated the lipid composition of platelets in paired subjects with and without atherosclerotic disease, either hypercholesterolemic (low density lipoprotein [LDL] cholesterol [Chol]≥170 mg/dl) or normocholesterolemic (LDL-Chol<170 mg/dl). Platelets from patients with atherosclerotic disease had a lower phosphatidylcholine (PC)/Chol ratio, when compared with those from patients without atherosclerotic disease, irrespective of LDL-Chol levels. Eleven patients with atherosclerotic disease were treated with purified. EPA ethyl ester (1.8 g/day), and changes in lipid composition of platelets were investigated. Plasma levels of total Chol and LDL-Chol decreased significantly after EPA administration. The phospholipid (PL)/Chol ratio and the PC/Chol ratio in platelets from patients with atherosclerotic disease increased significantly after 4–10 wk EPA treatment. The EPA content in platelets increased, while the arachidonic acid (AA) content decreased. EPA-induced changes in the PL/Chol and the PC/Chol ratios of platelets, as well as fatty acyl chain shifts, may be related to the beneficial effects in preventing atherosclerosis, possibly by increase in the membrane fluidity.