How similar are two-unit bicycle and motorcycle crashes?

This paper explores the similarities and differences between bicycle and motorcycle crashes with other motor vehicles. If similar treatments can be effective for both bicycle and motorcycle crashes, then greater benefits in terms of crash costs saved may be possible for the same investment in treatments. To reduce the biases associated with under-reporting of these crashes to police, property damage and minor injury crashes were excluded. The most common crash type for both bicycles (31.1%) and motorcycles (24.5%) was intersection from adjacent approaches. Drivers of other vehicles were coded most at fault in the majority of two-unit bicycle (57.0%) and motorcycle crashes (62.7%). The crash types, patterns of fault and factors affecting fault were generally similar for bicycle and motorcycle crashes. This confirms the need to combat the factors contributing to failure of other drivers to yield right of way to two-wheelers, and suggest that some of these actions should prove beneficial to the safety of both motorized and non-motorized two-wheelers. In contrast, child bicyclists were more often at fault, particularly in crashes involving a vehicle leaving the driveway or footpath. The greater reporting of violations by riders and drivers in motorcycle crashes also deserves further investigation.     

Recovery of deuterium from hydrogen–deuterium mixture using palladium

The applicability of palladium for the separation of hydrogen isotopes (hydrogen and deuterium) is evaluated systematically by generating isotherm data and conducting column experiments in a laboratory set-up. Effect of various parameters such as concentration of the isotopic mixture, particle size, eluent flow rate, etc. is studied experimentally. A fixed-bed chromatographic model is developed and validated using the experimental data. The model is further used to predict the performance of a multi-column configuration for large-scale separation. Chromatographic separation is thus found to be a promising technique to achieve the required purity and hence it may be clubbed with the existing systems (e.g. cryogenic distillation) to obtain enhanced performance.     

Reduced Maternal Erythrocyte Long Chain Polyunsaturated Fatty Acids Exist in Early Pregnancy in Preeclampsia

The present prospective study examines proportions of maternal erythrocyte fatty acids across gestation and their association with cord erythrocyte fatty acids in normotensive control (NC) and preeclamptic pregnancies. We hypothesize that maternal fatty acid status in early pregnancy influences fetal fatty acid stores in preeclampsia. 137 NC women and 58 women with preeclampsia were included in this study. Maternal blood was collected at 3 time points during pregnancy (16–20th weeks, 26–30th weeks and at delivery). Cord blood was collected at delivery. Fatty acids were analyzed using gas chromatography. The proportions of maternal erythrocyte α‐linolenic acid, docosahexaenoic acid, nervonic acid, and monounsaturated fatty acids (MUFA) (p < 0.05 for all) were lower while total n‐6 fatty acids were higher (p < 0.05) at 16–20th weeks of gestation in preeclampsia as compared with NC. Cord 18:3n‐3, 22:6n‐3, 24:1n‐9, MUFA, and total n‐3 fatty acids (p < 0.05 for all) were also lower in preeclampsia as compared with NC. A positive association was observed between maternal erythrocyte 22:6n‐3 and 24:1n‐9 at 16–20th weeks with the same fatty acids in cord erythrocytes (p < 0.05 for both) in preeclampsia. Our study for the first time indicates alteration in maternal erythrocyte fatty acids at 16th weeks of gestation which is further reflected in cord erythrocytes at delivery in preeclampsia.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

Microwave-Hydrothermal Synthesis of Ni0.53Cu0.12Zn0.35Fe2O4/SiO2 Nanocomposites for MLCI

The nanocomposites of NiCuZnFe₂O₄-SiO₂ were prepared using Microwave-Hydrothermal method at 160°C/45 min.The as-synthesized powders were characterized using X-ray diffraction and Transmission Electron Microscope (TEM).The average particle size of the powders were found to be ～20 nm.The powders were densified at 900°C/30 min using Microwave sintering method. The sintered composite samples were characterized using XRD and Scanning Electron Microscopy (SEM). Crystallite size of the ferrites decreases with an increase of SiO₂ content. The density of the composites varies of 93–98% of theoretical density. The densities of the present composites were increasing with the addition of SiO_2. The bulk densities of the present composites were increasing with the addition of SiO₂. The structural changes in these samples were characterized using Fourier Transform Infrared Spectrometer (FTIR) in the 400–4000 cm^?1. The bands in the range of 580–880 cm^?1 show a slight increase in intensity, which could be ascribed to the enhanced interactions between the NiCuZnFe₂O₄ clusters and silica matrix. The resistivity of the sintered samples was increased with an addition of ferrite content. The real and imaginary parts of permittivity and permeability were measured in the frequency range of 1 MHz–1.8 GHz.The addition of SiO₂ alters the values of dielectric constant and permeability which is useful to the Multilayer Chip Inductors (MLCI) fabrication.     

Synthesis and characterization of niobium-doped potassium tetragonal tungsten bronzes, KxNbyW1?yO3

Needle-shaped crystals of sizes up to 5 μm × 5 μm × 40 μm of nominal composition K _x Nb _y W_1−y O₃ were synthesized by solid state method at 800 °C using appropriate amount of WO₃, WO₂, Nb₂O₅, and K₂WO₄. The samples were characterized with XRD, SEM, microprobe analysis, optical spectroscopy, and Raman spectroscopy. The XRD patterns of the samples show single phase of tetragonal tungsten bronze (TTB) type (P4/mbm, No. 127) up to y = 0.07. Structure refinements reveal an increase in cell parameter with increasing nominal niobium content within the TTB phase. The elemental compositions of the crystals determined by electron microprobe analysis also show an increase in Nb content with increasing y. With increasing Nb content the reflectivity minimum in the near infrared spectral range shifts towards lower wavenumber indicating the effect of decreasing carrier concentration. Pyrochlore type phase (KNbWO₆) is obtained as a second phase when nominal composition y > 0.07.