An optical solution to the 3-SAT problem using wavelength based selectors

In this paper, an optical wavelength-based method to solve a well-known NP-complete problem 3-SAT is provided. In the 3-SAT problem, a formula F in the form of conjunction of some clauses over Boolean variables is given and the question is to find if F is satisfiable or not. The provided method uses exponential number of different wavelengths in a light ray and considers each group of wavelengths as a possible value-assignment for the variables. It then uses optical devices to drop wavelengths not satisfying F from the light ray. At the end, remaining wavelengths indicate satisfiability of the formula. The method provides two ways to arrange the optical devices to select satisfying wavelengths for a given clause: simple clause selectors and combined clause selectors, both requiring exponential preprocessing time. After preprocessing phase, the provided method requires polynomial time and optical devices to solve each problem instance.     

Optimum weight design of fiber composite plates in flexure based on a two level strategy

This paper offers a method for weight optimization of multilayer fiber composite plates under the action of lateral loadings. The objective is to design a fiber composite plate of minimum thickness which can sustain multiple static loadings applied normal to its surface without exhibiting failure based on Tsai-Hill criterion in any of its layers. In this investigation, fiber orientation angles are treated as discrete variables, which can vary only by pre-assigned increments, while thicknesses of layers are treated as continuous variables. The optimization procedure is based on a two stage strategy; in the first of which only the fiber orientation angles for the layers are treated as variables, and in the second, only the layer thicknesses. A powerful criterion based on a load factor has been defined to find the best angle for a new layer in the first stage, and the method of center points has been used for thickness optimization in the second stage. After any angle and thickness optimization has been done, a new layer is added to the thickness and the procedure is repeated for other new layers. The end of the two stage procedure is signaled whenever the thickness of the new layer in the optimization process approaches zero; meaning that no new layers would improve the set of layers already found. In this way at the end of the optimization procedure the plate thickness would be made of a minimum number of layers whose fibers are optimally oriented, and whose thicknesses are minimal. A poor choice of layers in the stack produce near zero thickness for the respective layer, and are thus deleted from the set. A repeat process is performed after each cycle, to modify layer angles in order to compensate for errors due to approximations involved. The priorities exercised in the choice of new layers for inclusion in the set and exclusion of all the un-necessary ones, allow an optimal state of stacking sequence to be achieved. Several examples are given to demonstrate the operation of the algorithm.     

Noise analysis and characterization of a sigma-delta capacitive microaccelerometer

This paper reports a high-sensitivity low-noise capacitive accelerometer system with one micro-g//spl radic/Hz resolution. The accelerometer and interface electronics together operate as a second-order electromechanical sigma-delta modulator. A detailed noise analysis of electromechanical sigma-delta capacitive accelerometers with a final goal of achieving sub-/spl mu/g resolution is also presented. The analysis and test results have shown that amplifier thermal and sensor charging reference voltage noises are dominant in open-loop mode of operation. For closed-loop mode of operation, mass-residual motion is the dominant noise source at low sampling frequencies. By increasing the sampling frequency, both open-loop and closed-loop overall noise can be reduced significantly. The interface circuit has more than 120 dB dynamic range and can resolve better than 10 aF. The complete module operates from a single 5-V supply and has a measured sensitivity of 960 mV/g with a noise floor of 1.08 /spl mu/g//spl radic/Hz in open-loop. This system can resolve better than 10 /spl mu/g//spl radic/Hz in closed-loop.     

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

Facile one-pot synthesis of novel dicyanoanilines fused to tetrahydro-4H-thiopyran-4-one ring via Et3N/H2O catalyzed pseudo four-component reaction

A facile procedure is developed for one-pot synthesis of a new group of dicyanoanilines. Tetrahydro-4H-thiopyran-4-one, 1, undergoes a pseudo four-component reaction with various aldehydes bearing different groups and two equivalents of malononitrile in aqueous media in the presence of triethylamine (Et₃N). As a result, novel thiopyran-fused dicyanoanilines 4 are formed efficiently in the reaction mixtures in 90–97% yield within 9–12?h mixing at 40°C. Due to the polarity of the medium, products precipitate in the mixture spontaneously allowing for easy purification by recrystallization avoiding cumbersome chromatographic separations. Characterization of the products was performed by spectroscopic methods and, in one case, was further supported by X-ray crystallographic experiments.     

High Gain Modified Dual-Band and Dual-Circularly Polarized Array Antenna

Wireless Personal Communications - A novel design of double-layer dual-band circularly polarized array antennas (DDCPAAs) is presented in this paper. First, a DDCP single antenna is introduced as...     

Locality‐Conscious Nested‐Loops Parallelization

To speed up data‐intensive programs, two complementary techniques, namely nested loops parallelization and data locality optimization, should be considered. Effective parallelization techniques distribute the computation and necessary data across different processors, whereas data locality places data on the same processor. Therefore, locality and parallelization may demand different loop transformations. As such, an integrated approach that combines these two can generate much better results than each individual approach. This paper proposes a unified approach that integrates these two techniques to obtain an appropriate loop transformation. Applying this transformation results in coarse grain parallelism through exploiting the largest possible groups of outer permutable loops in addition to data locality through dependence satisfaction at inner loops. These groups can be further tiled to improve data locality through exploiting data reuse in multiple dimensions.