HVOF sprayed WC–Co coatings: Microstructure,mechanical properties and friction moment prediction

This study aims at gaining a better understanding of the microstructural features that control the mechanical and the tribological performances of WC–12 wt.% Co coatings under High Velocity Oxygen Fuel (HVOF) spraying conditions. This paper looks at the influences of the HVOF process parameters for WC–12Co material on the microstructural and the tribological behaviours of the coatings. The correlation between the coating microstructure and the wear behaviour is investigated by observing and analysing the microstructure and by studying the friction moment using enhanced statistical tool based on neural computations. According to the experimental and the numerical results, it has been shown that the spray parameters affect the phase composition, hardness and porosity of HVOF sprayed WC–12Co coatings and the correlations with HVOF process parameters are fully predictable in the steady-state regime.     

Techno-economic assessment of gas pressure-based electricity generation (A case study of Iran)

The pipeline gas pressure can be recovered as electricity by installing a turbo-expander in parallel with throttle valves at pressure reduction stations. This paper aims to provide a techno-economic assessment of electricity generation at a gas pressure reduction station. Owing to the gas flow rate of the station, technical assessment showed two installation capacities of 2853 kw (Case I) and 4169 kw (Case II). As a result, NPV and IRR for Case I is calculated €1,669,623.93 and 28.95%; and for Case II, NPV and IRR is €1,393,871.91 and 23.91% respectively. The analysis indicated case I is more profitable than case II.     

Comparison of ionic liquid,acid and alkali pretreatments for sugarcane bagasse enzymatic saccharification

BACKGROUND: Much attention has been given to applying ionic liquids (ILs) as an alternative pretreatment method for lignocellulosic biomass. This study aims to select the most suitable type of IL for pretreating sugarcane bagasse (SCB). The potential of ILs for pretreatment was evaluated and compared with conventional pretreatment media, acids and alkalis. The performance of the pretreatment media was evaluated based on the amount of reducing sugar produced from enzymatic saccharification, the energy requirement, and changes in the chemical structure and crystallinity index of the pretreated bagasse. RESULTS: 1‐ethyl‐3‐methylimidazolium acetate [EMIM]oAc was selected as the most suitable IL for SCB pretreatment. The optimum yields of reducing sugar obtained from [EMIM]oAc‐, alkali‐, and acid‐pretreated SCB were 69.5%, 92.8% and 41.3%, respectively. Although a lower yield of reducing sugar was obtained, [EMIM]oAc pretreatment required the least energy to pretreat 1 kg of SCB. Moreover, the percentage of SCB loss during [EMIM]oAc pretreatment was the lowest. [EMIM]oAc‐pretreated SCB also had the lowest crystallinity index (CI) with the most amorphous structure. CONCLUSION: [EMIM]oAc appears to be another option for pretreating SCB, and other issues such as the recyclability of [EMIM]oAc is worth investigating. Copyright © 2011 Society of Chemical Industry     

Miscibility of poly(acrylic acid)/poly(methyl vinyl ketone) blend and in vitro application as drug carrier system

A series of poly(acrylic acid)/poly(methyl vinyl ketone) (PAA/PMVK) blends with different compositions were prepared by the solvent casting method. The miscibility of this pair of polymers was investigated by differential scanning calorimetry(DSC), Fourier transform infra-red (FTIR) and X-Ray diffraction (XRD) techniques. An in-vitro cytotoxicity test of the drug-carrier system via MTT (3-(4,5-demethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay revealed no significant cytotoxic effects at concentrations up to 100 µg· ml^?1. The STX/PAA-50 drug carrier systems were also prepared by solvent casting of solutions containing the sulfamethoxazole (STX) used as drug model and PAA/PMVK blend in N.N-dimethylformamide then crosslinked with acidified ethylene glycol. The release dynamic of STX from the prepared hydrogels was investigated in which the diffusion through the polymer matrix, the enhancement of the water solubility of STX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamic was evaluated. According to the total gastrointestinal transit time estimated by Belzer, the estimate distribution of STX released in the different organs indicated that the performance is obtained with the drug – carrier-system containing equal ratios of polymer and 10 wt% of STX (STX-10/PAA-50).     

Thermal performance of different pond cells under actual climatic conditions in Qatar

Experimental work was undertaken to study the thermal performance of three different pond cells under actual climatic conditions of Qatar. The first cell was an open pond. In the second unit, a finned radiator, painted black, was placed over the pond. In the third cell, the water was contained in a polyethylene bag. Experimental results indicated that the exposed pond cell came out best, when considered in terms of how quickly the temperature of the stored water could be reduced, and how low that temperature could be. The water in the exposed pond was cooled directly (by evaporation and radiation to sky) whereas in the case of the finned radiator cell, heat had to be transferred from the stored water to the radiator, and then from the radiator to the surrounding. In the case of water-in-bag cell, evaporation was eliminated and radiative exchange with the sky was reduced due to the partial transparency of the polyethylene bag (in the infrared region).     

A genetic programming model for bankruptcy prediction: Empirical evidence from Iran

Prediction of corporate bankruptcy is a phenomenon of increasing interest to investors/creditors, borrowing firms, and governments alike. Timely identification of firms’ impending failure is indeed desirable. By this time, several methods have been used for predicting bankruptcy but some of them suffer from underlying shortcomings. In recent years, Genetic Programming (GP) has reached great attention in academic and empirical fields for efficient solving high complex problems. GP is a technique for programming computers by means of natural selection. It is a variant of the genetic algorithm, which is based on the concept of adaptive survival in natural organisms. In this study, we investigated application of GP for bankruptcy prediction modeling. GP was applied to classify 144 bankrupt and non-bankrupt Iranian firms listed in Tehran stock exchange (TSE). Then a multiple discriminant analysis (MDA) was used to benchmarking GP model. Genetic model achieved 94% and 90% accuracy rates in training and holdout samples, respectively; while MDA model achieved only 77% and 73% accuracy rates in training and holdout samples, respectively. McNemar test showed that GP approach outperforms MDA to the problem of corporate bankruptcy prediction.     

Marble mosaic tiling automation with a four degrees of freedom Cartesian robot

The art of mosaic has arisen thousands of years ago. Despite all those years and all the attention it has received till today, mosaic tiling is still being carried out manually and mosaic tiling processes have never been changed except the tool and material developments.     

A High-Frequency Variable-Voltage-Fed Inverter

A half-bridge inverter circuit capable of providing a wide range of ac output voltages and frequencies is presented. The inverter uses asymmetrical thyristors (ASCR's), which have the advantages of high-power handling capability, small turn-on and turn-off times, and exhibit the same ruggedness associated with conventional thyristors in regards to surge current and gating requirements. By using ASCR's for the main and auxiliary devices, the inverter offers other advantages such as low snubber-power loss, low commutation loss, simple protection circuits, and the ability to operate at high frequencies with different types of loads. Output voltage control is obtained by feeding the inverter from a variable dc source. Two fixed-value auxiliary dc sources are used to obtain a constant-current interruption capability. The performance of the inverter is evaluated both analytically and experimentally.