Progressive mean control chart is not a special case of an exponentially weighted moving average control chart

The progressive mean (PM) statistic is based on a simple idea of accumulating information of each subgroup by calculating the average progressively. Its weighting structure is based on a subgroup number that changes arithmetically, which makes the PM chart unique and efficient compared with the existing classical memory control charts. In a recent article (see reference 1), it was claimed that the PM chart is a special case of the exponentially weighted moving average (EMWA) chart. In this article, it is shown that even though the PM statistic can be written in the form of an EWMA statistic, the variance of the PM statistic is different from that of the EWMA statistic. Consequently, the limits of the PM chart are different from that of the EWMA chart. Therefore, it is found that the PM chart is not a special case of the EWMA chart; hence, the claim in reference 1 is incorrect. Furthermore, it is pointed out in this paper that no adaptive property in the weighting parameter of the PM statistic exists, further contradicting the claim in reference 1.     

THE NATURE AND ORIGIN OF AUTHIGENIC CHLORITE AND RELATED CEMENTS IN OLIGO–MIOCENE RESERVOIR SANDSTONES,TAPTI GAS FIELDS,SURAT DEPRESSION,OFFSHORE WESTERN INDIA

Reservoir sandstones in the Mid‐ and South Tapti gas fields in the Surat Depression (Mumbai Offshore Basin, western India) have been investigated using a range of petrographic techniques, isotope geochemistry and basin modelling. Authigenic chlorite is abundant in the shallow‐marine sandstones of the Miocene Mahim Formation, a major reservoir rock in the Mid‐ and South Tapti fields, which are described here in terms of their quality and diagenetic characteristics. The sandstones are currently at burial depths of between ～1500 and 2800m. The authigenic chlorite has had a significant impact on the resulting reservoir quality of the sandstones and is interpreted to have originated as odinite clay of the verdine facies that replaced faecal or pseudo‐faecal pellets, together with volumetrically small but abundant grain coatings and grain rims, and formed at the site of major riverine iron influx onto the shallow‐marine shelf during periods of relatively low sea level. Pellets have been variably compacted to form pseudomatrix. Reservoir sandstones from similar depositional settings on the west coast of India or other sub‐tropical settings are likely to exhibit comparable diagenetic effects on reservoir quality. Compositionally, the chlorite is the iron‐rich form known as chamosite. The chemistry of all the chlorite morphologies is the same in all studied samples. Oxygen isotope analyses of carbonate cements in the Mahim Formation sandstones have provided an approximate temperature framework for diagenesis of the non‐carbonate cements. Oxygen isotope results for the chlorite, however, suggest much higher temperatures than its position in the paragenetic sequence would warrant. These results suggest that the clay formed first as 1:1 layer clays, in this case odinite, which were then transformed to Fe‐chlorite as burial depths and temperatures increased. Reservoirs in the Mahim, Daman and Mahuva Formation sandstones are thus greatly influenced by the diagenesis of authigenic chlorite and locally by the precipitation of carbonate cements. Reservoir quality is good where thick, continuous chlorite rim cements are present and where chlorite pellets are sufficiently indurated for them not to be compacted. Chlorite rim cements have reduced the extent of quartz overgrowth cementation in the sandstones.     

Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.     

Drug‐loaded polyurethane/clay nanocomposite nanofibers for topical drug‐delivery application

In this study, polyurethane/nanoclay nanocomposite nanofibrous webs were prepared by electrospinning. An antiseptic drug, chlorhexidine acetate (CA), was loaded onto montmorillonite clay and was then incorporated into polyurethane nanofibers. For comparison, the CA drug was loaded directly into the polyurethane solution dope used to electrospin the nanofibers. The emphasis was on investigating the effect of the drug loading into the nanoclay vis‐à‐vis direct drug loading on the drug‐release behavior of nanofibrous webs. The nanofibrous webs were also evaluated for other properties, such as moisture vapor transmission, porosity determination, contact angle measurement, and antibacterial activity, which are important for topical drug‐delivery application. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40230.     

Preparation of CaCO3‐based biomineralized polyvinylpyrrolidone–carboxymethylcellulose hydrogels and their viscoelastic behavior

In the blend of natural and synthetic polymer‐based biomaterial of polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC), fabrication of CaCO₃ was successfully accomplished using simple liquid diffusion technique. The present study emphasizes the biomimetic mineralization in PVP–CMC hydrogel, and furthermore, several properties of this regenerated and functionalized hydrogel membranes were investigated. The physical properties were studied and confirmed the presence of CaCO₃ mineral in hydrogel by Fourier transform infrared spectroscopy and Scanning electron microscopy. Moreover, the absorptivity of water and mineral by PVP–CMC hydrogel was studied to determine its absorption capacity. Further, the viscoelastic properties (storage modulus, loss modulus, and complex viscosity) of mineralized and swelled samples (time: 5–150 min) were measured against angular frequency. It is interesting to know the increase of elastic nature of mineralized hydrogel filled with CaCO₃ maintaining the correlation between elastic property and viscous one of pure hydrogel. All these properties of biomineralized hydrogel suggest its application in biomedical field, like bone treatment, bone tissue regeneration, dental plaque and tissue replacement, etc. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40237.     

Impact behavior of unidirectional polyethylene–glass fibers: PMMA hybrid composite laminates

Unidirectional (UD) hybrid laminates based on glass fibers (GF) and high performance polyethylene fibers (PEF) were prepared with partially polymerized methyl methacrylate (MMA) at room temperature followed by heating at 55°C (well below the softening point of PEF) for 2 h. Izod impact strength of the composites was then measured. An interesting observation of the study was the change in impact strength that was largely dependent on the position of GF and PEF ply/plies present within the hybrid laminates. When the ply/plies of PEF were at the impacted surface, the impact strength showed a higher value than that of the case when GF ply/plies were at the impacted surface of the hybrid laminates. © 1996 John Wiley & Sons, Inc.     

Managing the Topological Expansion of Computer Networks in an Optimal Way

This article describes a subgradient-based near-optimal heuristic algorithm designed for minimizing the search of links that need to be added to an existing telecommunications network to enhance the survivability and routability of the network.