Experimental evaluation of quinolinium and isoquinolinium derivatives as corrosion inhibitors of mild steel in 0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript> solution

The 1-methylquinolinium iodide (I) Qui⁺, I^– and 2-methylisoquinolinium iodide isoQui⁺, I^– were investigated as a corrosion inhibitors for mild steel in sulfuric acid using electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The results indicated that the corrosion inhibition efficiency and extent of surface coverage were increased with increase in inhibitors concentrations. Polarization curves revealed that both inhibitors acted as a mixed-type inhibitor. The thermodynamic parameters were evaluated for corrosion inhibition process. The adsorption of both inhibitors on mild steel surface obeyed Langmuir adsorption isotherm.     

Bioactive and Physicochemical Properties of Persimmon as Affected by Drying Methods

In this study, the effects of three different drying methods (freeze drying, oven drying, and vacuum oven drying) on bioactive (total phenolics, total flavonoids, condensed tannin and total hydrolyzable tannin contents, antiradical activity, and antidiabetic activity) and some physicochemical (dry matter, ash, water activity (a _w ), color, protein, hydroxymethylfurfural, glucose and fructose content) properties of persimmon fruit were investigated. Simplex lattice mixture design methodology was applied to determine the best solvent mixture for the extraction of phenolics from the samples. It was found that the mixture of acetone:water at the ratio of 50:50 % (v/v) was the best solvent mixture for the extraction. The persimmon powder sample obtained from freeze drying showed significantly (p <0.05) higher bioactivity values than oven- and vacuum-oven-dried samples. Antiradical activity changed significantly depending on the drying method employed and it was superior in freeze-dried samples than that of the other drying methods.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

A 2D numerical simulation of sub-cooled flow boiling at low-pressure and low-flow rates

The main purpose of this study is to apply a two-fluid mathematical model to numerical simulation of two-phase flow at low-pressure condition. Although models of sub-cooled boiling flow at one-dimension and high-pressure have been studied extensively, there are few equivalent studies for numerical simulation at two-dimension and low-pressure (1-2 bar) conditions. Recent literature studies on sub-cooled boiling flow at low-pressure have shown that empirical models developed for high-pressure situations are not valid at low-pressures. Since the mathematical model used in this study is accomplished at low-pressure, the transport equations for the variables of each phase are substituted in low-pressure. The governing equations of two-phase flow with an allowance to inter-phase transfer of mass, momentum and heat, are solved using a two-fluid; non-equilibrium model. The finite volume discretization scheme is used to create a linearized system of equations that are solved by SIMPLE staggered grid solution technique for a rectangular channel. Improvement of the void fraction prediction of our model for the case of low-pressure sub-cooled flow boiling conditions was achieved. It is found that the heat transfer due to evaporation and surface quenching is higher than that by convection. Good agreement is achieved with the predicted results against the experimental data’s available in the literatures for a number of test cases.     

A smart multi-user massive MIMO system for next G Wireless communications using evolutionary optimized antenna selection

Recently multiserver queues with setup times have been extensively studied because they have applications in power-saving data centers. A challenging model is the M/M/c/Setup queue where a server is turned off when it is idle and is turned on if there are some waiting jobs. Recently, Gandhi et al. (in: Proceedings of the ACM SIGMETRICS, pp. 153–166, ACM, 2013; Queueing Syst. 77(2):177–209, 2014) obtain the generating function of the number of jobs in the system, as well as the Laplace transform of the response time using the recursive renewal reward approach and the distributional Little’s law (Keilson and Servi in Oper Res Lett 7(5):223– 227, 1988). In this paper, we derive exact solutions for the joint stationary queue length distribution of the same model using two alternative methodologies: generating function approach and matrix analytic method. The generating function approach yields exact closed form expressions for the joint stationary queue length distribution and the conditional decomposition formula. On the other hand, the matrix analytic approach leads to an exact recursive algorithm to calculate the joint stationary distribution and performance measures so as to provide some application insights.     

Performance evaluation of OFDM and single‐carrier systems using frequency domain equalization and phase modulation

In this paper, we study the performance of the continuous phase modulation (CPM)‐based orthogonal frequency division multiplexing (CPM‐OFDM) system. Also, we propose a CPM‐based single‐carrier frequency domain equalization (CPM‐SC‐FDE) structure for broadband wireless communication systems. The proposed structure combines the advantages of the low complexity of SC‐FDE, in addition to exploiting the channel frequency diversity and the power efficiency of CPM. Both the CPM‐OFDM system and the proposed system are implemented with FDE to avoid the complexity of the equalization. Two types of frequency domain equalizers are considered and compared for performance evaluation of both systems; the zero forcing (ZF) equalizer and the minimum mean square error (MMSE) equalizer. Simulation experiments are performed for a variety of multipath fading channels. Simulation results show that the performance of the CPM‐based systems with multipath fading is better than their performance with single path fading. The performance over a multipath channel is at least 5 and 12 dB better than the performance over a single path channel, for the CPM‐OFDM system and the proposed CPM‐SC‐FDE system, respectively. The results also show that, when CPM is utilized in SC‐FDE systems, they can outperform CPM‐OFDM systems by about 5 dB. Copyright © 2010 John Wiley & Sons, Ltd.     

Making concrete with saline well-water

Permitted limits of salt concentrations in water used for making mortar and plain concrete differ from one country to another, but in any event geographical conditions prevent this guidance being applied directly to Saudi Arabia. Comparing the effects on compressive strength of saline well-water and drinking quality water, scientists at the Department of Building Research in the Saudi Arabian Standards Organisation show in this article that well-water with total dissolved salts (TDS) concentrations up to 4500 ppm can be suitable for mixing and curing mortars and plain concrete.