Peptide-assisted synthesis of gold nanoparticles and their self-assembly

A novel gold nanoparticle-tripeptide (GNP-tripeptide) conjugate was prepared by peptide in-situ redox technique at ambient temperatureusing a newly designed tripeptide. This new tripeptide was nso designed that it has a C-terminus tyrosine residue, which reduced Au+3 to Au, and the terminally located free amino group was bound to the gold nanoparticle (GNP) surface resulting in highly stable Au colloids. The average diameter of the tripeptide-stabilized GNP is 8.7 +/- 2.3 nm. Tripeptide bound gold nanoparticles formed three-dimensional assemblies in the presence of an excess of similar or disimilar tripeptides. The aggregation of GNPs results in a red shift in the surface plasmon resonance from lambda max = 527 to 556 nm. The effect of the solvent, concentration, and nature of the tripeptides on the assembly process were investigated by TEM and UV-visible spectroscopy.     

Facile route to the synthesis of porous α-Fe2O3 nanorods

The requirements of simple and reliable protocols for the synthesis of anisotropic structures with controlled morphology continue to be a major challenge in nanoscience. In this paper we describe the facile synthesis of porous hematite (α-Fe₂O₃) nanorods using anionic surfactant as a rod-like template. α-FeOOH nanorods with diameters of 170–210 nm and lengths up to 3–5 μm were synthesized in high yield via hydrothermal method using sodium dodecyl sulphate as a template. The porous α-Fe₂O₃ was obtained after solvent extraction and calcining the as-obtained α-FeOOH nanorods at 500 °C for 6 h. Even after removal of template by solvent extraction and calcination the shape of the nanorods was intact except the generation of pores on the nanorods. The porous nanorods were analysed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission and high-resolution transmission electron microscopy (TEM & HRTEM), scanning electron microscopy (SEM) and superconducting quantum interference device (SQUID) measurements. SEM and TEM images showed that the morphology of hematite nanostructure is homogeneous in the shape of rods and full of porosity and magnetization measurements of the porous α-Fe₂O₃ nanorods showed weak ferromagnetic behavior. The surfactant SDS (sodium dodecyl sulphate) plays a key role in controlling the nucleation and growth of the nanorods and their use as a new class of inorganic scaffolds for the synthesis of nanomaterials are salient features of the work with implications in crystal engineering and nanocomposites design for various applications.     

An upper bound solution for closed die sinter forging of hexagonal shapes

The paper reports on an investigation into the various aspects of closed die cold forging of hexagonal powder preforms, which have been compacted and sintered from atomized powder. It is found that for certain dimensional ratios of the preform, the die pressure is minimum. An attempt has been made determine the die pressures developed during the closed die forging of the hexagonal powder preform by using an upper bound approach. The results so obtained are discussed critically to illustrate the interaction of various process parameters involved and are presented graphically     

Influence of Temperature and High Electric Field on Power Consumption by Piezoelectric Actuated Integrated Structure

The influence of electric field and temperature on power consumption of piezoelectric actuated integrated structure is studied by using a single degree of freedom mass-spring-damper system model coupled with a piezoactuator. The material lead zirconate titanate, is considered as it is capable of producing relatively high strains (e.g., 3000με). Actuators are often subject to high electric fields to increase the induced strain produced, resulting in field dependant piezoelectric coefficient d₃₁, dielectric coefficient ε₃₃ and dissipation factor δ. Piezostructures are also likely to be used across a wide range of temperatures in aerospace and undersea operations. Again, the piezoelectric properties can vary with temperature. Recent experimental studies by physics researchers have looked at the effect of high electric field and temperature on piezoelectric properties. These properties are used together with an impedance based power consumption model. Results show that including the nonlinear variation of dielectric permittivity and dissipation factor with electric field is important. Temperature dependence of the dielectric constant also should be considered.     

Determination of hydrodynamic properties of bare gold and silver nanoparticles as a fluorescent probe using its surface-plasmon-induced photoluminescence by fluorescence correlation spectroscopy

Noble-metal nanoparticles labeled with fluorescent molecules are used in a variety of applications requiring the measurement of size and diffusion properties of single nanoprobes. We have successfully used intrinsic surface-plasmon-induced photoluminescence (SPPL) signatures of monodispersed bare gold and silver nanoparticles in water to detect and measure their precise diffusion coefficient, concentration and hydrodynamic radius by fluorescence correlation spectroscopy (FCS). Measurement of the effective hydrodynamic radius confirms particle size to be 80 ± 8 and 64 ± 14 nm for gold and silver, respectively, which is in excellent agreement with scanning electron microscopic measurements made on the same particles. Detection of bare gold and silver nanoparticles at the single-molecule level with moderately high value of "per particle brightness" (PPB) confirms those particles to be used as fluorescent probes in biological research and in different medical and biotechnology applications where fluorescence detection plays a vital role. Additionally, these results demonstrate an alternative method for measuring hydrodynamic properties, particularly the size-distribution of bare noble-metal nanoparticles in solution using data-fitting algorithm for FCS based on the maximum entropy method (MEMFCS).     

Influence of Coating Granulation Process on Iron Ore Sinter Quality and Productivity

For better blast furnace performance, there has always been a need for better quality raw materials like sinter, lump ore, and pellets. Among these raw materials the usage of sinter in blast furnace is at higher side compared to other iron bearing materials. As the quality of sinter product improves, its usage in blast furnaces also increases. Iron ore fines are the main source for sinter making. To improve the sinter properties it is necessary to provide good quality of iron ore fines. Due to depletion of high grade iron ore resources, goethite and limonitic ore content in iron ore fines is expected to increase gradually. Usually limonitic and goethite ore are associated with higher alumina and LOI. The conventional sintering process is one of the well established processes for high quality hematite ore. It does not fully respond to the low grade iron ore associated with goethite and limonite. This has led to deterioration in sinter properties and productivity. In recent years the improvement in the quasi‐particle structure with the granulation process is an effective method for improving sinter quality and productivity. To improve the sinter quality and productivity for low grade iron ore fines, different granulation processes like the conventional one, and other two advanced granulation processes like coke breeze, and flux & coke breeze coating granulation were studied in detail by conducting laboratory pot grate sintering experiments. From the test results it was found that sinter productivity, physical and metallurgical properties of the sinter improved with flux & coke breeze coating granulation process compared to conventional and coke breeze coating granulation process. Proper selection of the granulation time is very important to achieve the desired sinter properties. In the present work detailed laboratory experiments have been carried out by varying the coating time from 30s to 110s to study the influence of flux & coke breeze coating granulation time on mineralogy, productivity, physical, and metallurgical properties of sinter. With a coating granulation time of 50s, higher productivity, higher yield, and stronger sinter (higher T.I) with lower RDI and ‐5mm size sinter were achieved.     

Investigation of Eccentric Open Eye Formation in a Slab Caster Tundish

Metallurgical and Materials Transactions B - Inert gas shrouding in tundish can result in the formation of a tundish open eye (TOE) due to the presence of reversed flows on the upper surface of the...     

The effect of curcumin on human B-cell immortalization by Epstein-Barr virus

Cyclosporine is a commonly used immunosuppressant in solid-organ transplantation. It is, however, associated with an increased incidence of Epstein-Barr virus (EBV)induced post-transplant lymphoproliferative disorder (PTLD). In this study, human B lymphocytes isolated from healthy volunteers were immortalized in vitro with EBV. The effect of oxidative stress mediated by cyclosporine A or hydrogen peroxide on in vitro B cell immortalization was studied by coculturing immortalized B cells with cyclosporine A and hydrogen peroxide. Curcumin, a phenolic extract of the spice turmeric, was then used to observe its effect on this process. We found that in vitro B-cell immortalization with EBV was promoted by the oxidative stress induced by cyclosporine A and hydrogen peroxide, with the maximum effect seen at concentrations of 500 ng/ml and 100 microM, respectively. Curcumin blocked the B-cell immortalization in a dose-dependent fashion with nearly complete inhibition at 20 microM. We conclude that, because both hydrogen peroxide and cyclosporine A strongly promote in vitro B-cell immortalization with EBV (the putative process responsible for PTLD) and curcumin, an extract of a common spice is an effective inhibitor of this process; curcumin may be an effective adjunct in the prevention of PTLD in the patients undergoing therapy with cyclosporine A.