Highly efficient[C8mim][Cl] ionic liquid accompanied with magnetite nanoparticles and different salts for interfacial tension reduction

The 1-octyl-3-methylimidazolium chloride, [C_8 mim][Cl] ionic liquid(IL) was used as a novel surfactant in n-heptane/water system. The interfacial tensions(IFT) were measured and corresponding variations were investigated. An IFT reduction of 80.8% was appropriate under the IL CMC of about 0.1 mol·L~(-1) and stronger effects were achieved when magnetite nanoparticles and salts were present profoundly under alkaline p Hs.The equilibrium IFT data were accurately simulated with the Frumkin adsorption model. Hereafter, the saturated surface concentration, equilibrium constant and interaction parameter were obtained and their variations were demonstrated. Further, emulsion stability and contact angle of oil/water interface over quartz surface were studied. The oil/water emulsion stability was hardly changed with nanoparticles; however, the stability of oil/water + IL emulsions was significantly improved. It was also revealed that the presence of sodium and calcium chloride electrolytes fortifies the IL impact, whereas sodium sulfate weakens. From dynamic IFT data and fitting with kinetic models, it was found that the IL migration toward interface follows the mixed diffusion–kinetic control model. Consequently, the IL diffusion coefficient and the appropriate activation energy were determined.     

A Pyropheophorbide Analogue Containing a Fused Methoxy Cyclohexenone Ring System Shows Promising Cancer-Imaging Ability

Herein we report the synthesis, photophysical properties, positron emission tomography (PET) imaging and photodynamic therapy (PDT) efficacy of methyl 3-(1′-m-iodobenzyloxy)ethyl-3-devinyl-verdin 4 (with or without the ¹²⁴I isotope). The PET imaging ability and ex vivo biodistribution of [¹²⁴I] 4 were compared with the well-studied methyl [3-(¹²⁴1′-m-iodobenzyloxy)ethyl]-3-devinyl-pyropheophorbide-a methyl ester (PET-ONCO or [¹²⁴I] 2 ) and [¹⁸F]fluorodeoxyglucose ([¹⁸F]FDG) in BALB/c mice bearing colon-26 tumors. Whole-body PET images of [¹²⁴I] 4 containing a fused methoxy cyclohexenone ring system showed excellent tumor contrast with time (72>48>24 h post-injection). Ex vivo biodistribution results indicate that relative to the current clinical standard [¹⁸F]FDG and [¹²⁴I] 2 in 2 % ethanol formulation, [¹²⁴I] 4 , at the same radioactive dose (25 μCi per mouse), showed higher tumor uptake at 24 h post-injection and longer tumor retention. In biological environments, compound 4 showed lower fluorescence and lower singlet oxygen yield than 2 , which is possibly due to higher aggregation caused by the presence of a fused cyclohexenone ring system, resulting in limited in vitro/in vivo PDT efficacy. Therefore, the chlorophyll-a analogue [¹²⁴I] 4 provides easy access to a novel PET imaging agent (with no skin phototoxicity) to image cancer types—brain, renal carcinomas, pancreas—in which [¹⁸F]FDG shows limitations.     

Fabrication and characterization of electrospun Plantago major seed mucilage/PVA nanofibers

Electrospinning is a well-known technique for producing nanofibers using synthetic and natural polymers like mucilage. In this study, Plantago major Mucilage (PMM) was blended with polyvinyl alcohol (PVA) as a nontoxic adding agent, in order to produce electrospun nanofiber. Electrospinning parameters (voltage, tip-to-collector distance, feed rate, and PMM/PVA ratio) were optimized and solution properties were analyzed. The morphology of nanofibers was investigated using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET). Mechanical strength of nanofibers was determined, and cell viability on nanofibers was discussed by MTT assay. The results of SEM indicated that the PMM/PVA (50/50) nanofibers obtained with average diameter of 250 nm. Viscosity, electrical conductivity, and surface tension of PMM/PVA solution were 550 Cp, 575 μS/cm, and 47.044 mN/m, respectively. FTIR and XRD results verified the exiting PMM in produced nanofibers and no chemical reaction between PMM and PVA. Improvement in mechanical strength and cell viability of nanofibers by adding PMM to PVA nanofibers indicated the potential application of PMM-based nanofibers for medical and food industries. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47852.     

AMBO: All Members-Based Optimizer for Solving Optimization Problems

There are many optimization problems in different branches of science that should be solved using an appropriate methodology. Population-based optimization algorithms are one of the most efficient approaches to solve this type of problems. In this paper, a new optimization algorithm called All Members-Based Optimizer (AMBO) is introduced to solve various optimization problems. The main idea in designing the proposed AMBO algorithm is to use more information from the population members of the algorithm instead of just a few specific members (such as best member and worst member) to update the population matrix. Therefore, in AMBO, any member of the population can play a role in updating the population matrix. The theory of AMBO is described and then mathematically modeled for implementation on optimization problems. The performance of the proposed algorithm is evaluated on a set of twenty-three standard objective functions, which belong to three different categories: unimodal, high-dimensional multimodal, and fixed-dimensional multimodal functions. In order to analyze and compare the optimization results for the mentioned objective functions obtained by AMBO, eight other well-known algorithms have been also implemented. The optimization results demonstrate the ability of AMBO to solve various optimization problems. Also, comparison and analysis of the results show that AMBO is superior and more competitive than the other mentioned algorithms in providing suitable solution.     

Comparisons of the Microstructure and Magnetic Properties of Anisotropic NdFeB Magnets Prepared by Hot Pressing and Spark Plasma Sintering

Journal of Superconductivity and Novel Magnetism - NdFeB hot-pressed and hot-deformed magnets were prepared by hot-pressed (HP) sintering and spark plasma sintering (SPS). The effects of sintering...     

Magnetic Properties and Microstructural Modifications of Sm-Co-Hf Alloy Ribbons by B Addition

Journal of Superconductivity and Novel Magnetism - Microstructure optimization is highly desirable for improving the magnetic properties of permanent magnetic materials. To optimize the...     

An Efficient Digital Confidentiality Scheme Based on Commutative Chaotic Polynomial

Multimedia Tools and Applications - One of the most critical aspects of this technologically progressive era is the propagation of information through an unsecured communication channel. The...