Modeling the flow-level performance of hierarchical modulation in?OFDMA-based networks

Hierarchical Modulation (HM) is a means to enhance the spectral efficiency of a system by superposing, in terms of modulation, an additional stream for a given user with good radio conditions on a basic stream of a user with worse radio conditions. This, in turn, increases the throughput of the former user and hence the overall performance of the whole system. We consider, in this work, such a performance at the flow level, for a realistic dynamic setting where users come to the system and leave it after a finite duration corresponding, for instance, to the completion of a file transfer. We specifically model and quantify, both analytically and via simulations, the gain thus achieved and propose two extensions to the basic HM algorithm: a first one in which a user with bad radio conditions is also superposed on one with better radio conditions and a second one in which a user of one type is further superposed on a user of the same type as well.     

Study of defect levels in CdTe using thermoelectric effect spectroscopy

We have studied the defect levels in as grown and post growth processed cadmium telluride (CdTe) using thermoelectric effect spectroscopy (TEES) and thermally stimulated current (TSC) techniques. We have extracted the thermal energy (E_th) and trapping cross section (σ_th) for the defect levels using the initial rise and variable heating rate methods. We have identified 10 different defect levels in the crystals. Thermal ionization energy values obtained experimentally were compared to theoretical values of the transition-energy levels of intrinsic and extrinsic defects and defect complexes in CdTe determined by first-principles band-structure calculations. On the basis of this comparison, we have associated the observed ionization levels with various native defects and impurity complexes.     

Microscopic details of asphaltenes aggregation onset during waterflooding

We report detailed microscopic studies of asphaltenes aggregation onset during waterflooding of petroleum reservoirs. To achieve this objective, a series of simulations are performed on asphaltenic-oil miscibilized with water at high pressure and temperature through molecular dynamics. Results of this simulation onset are applicable to asphaltenes behavior in real crude oils. Our simulation results illustrate that the aggregation onset in waterflooding generally follows three sequential steps: (i) Asphaltene-water interaction; (ii) Water bridging; (iii) Face-to-face stacking. Then, asphaltene-water and water-water hydrogen-bonding network surround every aggregate boosting the intensity of aggregation onset. We intend to utilize such understanding of these details in our predictive and preventive measures of arterial blockage in oil reservoirs during waterflooding.     

Experimental Analysis of Punch-Through Conditions in Power P-I- N Diodes

Commercial power diodes are optimized to feature punch-through behavior. However, a tradeoff between the width and the doping level of the diode epitaxial layer leads to various levels of optimization. For a given breakdown voltage, a shorter epitaxial layer width leads to better transient performances. Device datasheets do not cover this issue and a simple experimental setup is presented to assess the optimization conditions inside the diode epitaxial layer. Three commercial devices are tested and experimental results are confronted to device simulations. A good agreement is found     

Analysis and simulation of interrupt overhead impact on OS throughput in high‐speed networks

The paper presents analytical and simulation models to study the impact of interrupt overhead on operating system throughput of network elements such as PC‐based routers, servers, and hosts when subjected to high‐speed network traffic. Under such high network traffic, the system throughput will be negatively affected due to interrupt overhead caused by the incoming traffic. We first present an analytical model for the ideal system when interrupt overhead is ignored. We then present two models which describe the impact of high interrupt rate on system throughput. One model is for employing PIO in which network adapters are not equipped with DMA engines, and the other model is for employing DMA in which network adapters are equipped with DMA engines. The paper also describes detailed discrete‐event simulation models for the ideal system and for systems with DMA and PIO. Simulations results as well as reported experimental measurements show that our analytical models are valid and give a good approximation. Our analysis and simulation work can be valuable in providing insight to understand and predict system behaviour, as well as improving and maintaining good host performance. The paper identifies analytically critical design operation points such as that of overload condition. The paper also proposes solutions and recommendations for improving performance. Copyright © 2005 John Wiley & Sons, Ltd.     

Location Management in PCS Networks by Caching Two-Level Forwarding-Pointers

One of the challenging tasks in Personal Communication Services (PCS) is to efficiently maintain the location of PCS subscribers who move from one region to another (hereafter called mobile users). When a mobile user receives a call, the network has to quickly determine its current location. The existing location management scheme suffers from high signaling traffic in locating the mobile users. Two-level forwarding pointer scheme has been proposed from per-user forwarding pointer scheme to reduce the cost of signaling traffic. In this paper, we enhance the two-level forwarding pointer scheme. When a mobile user moves from its current Registered Area (RA), which is served by Mobile Switching Center (MSC), to another RA the local switch that acts as a parent of those two MSCs maintains this movement in its memory (hereafter called cache entry). A cache entry is used to locate rapidly the mobile user instead of querying the Home Location Register (HLR) and waiting for its reply. HLR is centralized in the network and far away from the mobile users so that the signaling traffic crossing it is expensive. Sometimes the cache entry may be failed to reach the mobile user then a two-level forwarding pointers will be created from the corresponding Visitor Location Register (VLR), attached to its MSC, through a correct path to locate the mobile user. Thus, there is a saving in cost of querying the underlying HLR. The analytical results indicate that such proposal efficiently reduces the signaling traffic cost for all values of Call to Mobility Ratio (CMR), this is especially considerable when CMR ≥1, without any increase in the call setup delay. Salah M. Ramadan (samohra@yahoo.com) received the BS and MS degrees from Computers Engineering Department, Al-Azhar University, Cairo, Egypt, in 1995 and 2002, respectively. From 2002, he was a Ph.D. student in Computers Engineering Department at Al-Azhar University and is currently pursuing the Ph.D. degree, where he is a research assistant in the Wireless Networks Branch. His research interests include traffic management in ATM networks, routing protocols, mobility management in PCS networks, and mobile computing. He is currently an instructor in Cisco Academy, Egypt. Ahmed M. El-Sherbini (Sherbini@mcit.gov.eg) received the Ph.D. in Electrical and Communication Engineering, Case Western University, U.S.A. March 1983 and M.Sc. in Communication Engineering, Cairo University, Giza, Egypt, June 1980. (M. Sc. Research Studies at the Ecole Nationale Superieure des Telecommunications (ENST), Paris, France). He is the Director, National Telecommunication Institute – Ministry of Communications and Information Technology, Egypt and Professor of Electrical and Communication Engineering Dept. Faculty of Engineering, Cairo University, Egypt. M. I. Marie received his B.Sc., M.Sc. and Ph.D. in electronic and communication engineering from Cairo University on 1972, 1981, 1985, respectively. Now he is a professor of communications at Computer and System Engineering department Al-Azhar University, Cairo, Egypt. His fields of interest includes digital communication, computer networks and protocols development. M. Zaki (azhar@mailer.scu.eun.eg) is the professor of software engineering, Computer and System Engineering Department, Faculty of Engineering, Al-Azhar University at Cairo. He received his B.Sc. and M.Sc. degrees in electrical engineering from Cairo University in 1968 and 1973 respectively. He received his Ph.D. degrees in computer engineering from Warsaw Technical University, Poland in 1977. His fields of interest include artificial intelligence, soft computing, and distributed system.     

Antioxidant and anticholinesterase activity of essential oils and ethanol extracts of <Emphasis Type="Italic">Thymus algeriensis</Emphasis> and <Emphasis Type="Italic">Teucrium polium</Emphasis> from Algeria

This study aimed to investigate the cholinesterase (ChE) inhibitory and antioxidant activities of essential oil (EO) and ethanolic extract (EE) of two Lamiaceae medicinal plants from Algeria: Thymus algeriensis Boiss. & Reut. and Teucrieum polium subsp capitatum. The chemical composition of EOs analyzed by GC and GC–MS revealed the presence of carvacrol (43.2%), p-cymene (18.7%) and γ-terpinene (14.8%) as major compounds in T. algeriensis, while germacrene D (25.0%), bicyclogermacrene (10.4%), β-pinene (11.3%) and spathulenol (5.8%) were the most important components in T. polium oil. The best inhibitory activity on acetylcholinesterase (AChE) was exhibited by the EO of T. algeriensis. On the other hand, T. polium oil was more efficient against butyrylcholinesterase (BChE) than against AChE, whereas EEs showed weak or no inhibitory effect, particularly against AChE. Antioxidant activity was evaluated by β-carotene bleaching, ferric and cupric reducing powers and inhibition of ABTS^?+, DPPH^? and superoxide radicals. EOs showed different antioxidant trends depending on the assay used while ethanol extracts had high activity with all tests.     

Assessment of a regulatory sanitization process in Egyptian dairy plants in regard to the adherence of some food-borne pathogens and their biofilms

Food-borne pathogens may develop certain strategies that enable them to defy harsh conditions such as chemical sanitization. Biofilm formation represents a prominent one among those adopted strategies, by which food-borne pathogens protect themselves against external threats. Thus, bacterial biofilm is considered as a major hazard for safe food production. This study was designed to investigate the adherence and the biofilm formation ability of some food-borne pathogens on stainless steel and polypropylene surfaces using chip assay, and to validate regular sanitizing process (sodium hypochlorite 250mg/L) for effective elimination of those pathogens. Sixteen pathogenic bacterial strains, previously isolated from raw milk and dairy products at Zagazig city, Egypt (9 Staphylococcus aureus, 4 Cronobacter sakazakii and 3 Salmonella enterica serovar Typhimurium), were chosen for this study. Strains showed different patterns of adherence and biofilm formation on tested surfaces with minor significance between surfaces. The ability of sodium hypochlorite to completely eradicate either adhered or biofilm-embedded pathogens varied significantly depending on the strain and type of surface used. Whilst, sodium hypochlorite reduced tested pathogens counts per cm(2) of produced biofilms, but it was not able to entirely eliminate neither them nor adherent Cronobacter sakazakii to stainless steel surface. This study revealed that biofilm is considered as a sustainable source of contamination of dairy products with these pathogens, and also emphasized the need of paying more attention to the cleaning and sanitizing processes of food contact surfaces.     

Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.     

Fluorescence spectroscopy coupled with factorial discriminant analysis technique to identify sheep milk from different feeding systems

Rapid measurements of milk properties and discrimination of milk origin are necessary techniques for quality control of milk products. The present study was undertaken to evaluate the potential of using front face fluorescence spectroscopy (FFFS) and synchronous fluorescence spectroscopy (SFS) for monitoring the quality of forty-five ewe’s milk samples originating from different feeding systems. Physico-chemical analyses and fluorescence spectra were conducted on samples during lactation periods (the first 11 weeks). The principal component analysis (PCA) separately applied to the physico-chemical and fluorescence spectral data showed only small discrimination between milk samples based on lactation periods and diet compositions. Similar results were obtained by separately applying factorial discriminant analysis (FDA) on each technique. In a second step, concatenation technique were applied to FFF spectra acquired after excitation set at 250, 290, 380 nm and emission set at 410 nm. Results obtained showed a good discrimination among milk samples with regard to feeding systems given to the ewes throughout the lactation periods. In addition, a better discrimination was observed with FFFS than with SFS.