Effect of Sodium Carbonate on the Cloud Point in Alkyl Ether/Brine Systems: Apparent Relation with Dynamic Interfacial Tension Minimum

The effect of Na₂CO₃ on the cloud point in Na₂CO₃/surfactant/brine was investigated using two series of nonionic surfactants, C₁₃EO _x and C₁₇EO _x . The cloud point, T _cp, was found to decrease linearly with increasing Na₂CO₃ concentration. This was attributed to Na⁺ and particularly to CO₃ ^2?salting-out effect. The slope a = dTcp/d[Na₂CO₃] became more and more negative as the degree of ethoxylation is increased, suggesting that the higher the number of ethylene oxide (EO) groups the stronger is the cloud point depression for a given increment in Na⁺and CO₃ ^2?ions in solution. This was also illustrated by the linear variation of ΔT _cp = T _cp,0 ? T _cp,[Na2CO3] with the surfactant degree of ethoxylation.     

Facile Synthesis of Ferrocene-Based Polyamides and Their Organic Analogues Terpolyamides: Influence of Aliphatic and Aromatic Sequences on Physico-Chemical Characteristics

Efforts have been devoted to synthesize and characterize processable polymers with desired properties. Herein, four different series of aromatic and aliphatic terpolyamides were prepared via solution phase polycondensation of 4,4′-oxydianiline and hexamethylenediamine (HMDA) with various diacids chlorides (isophthalyol dichloride, terepthalyol dichloride, 1, 1′-ferrocene dicarboxylic acid chloride and trans-azobenzene-4, 4′-dicarbonyl chloride). The structural, morphological and physico-chemical nature of as prepared polymers was explored by Fourier-transform infrared spectroscopy, scanning electron microscopy, thermal analysis (TGA and DSC), and wide-angle x-ray diffraction. Moreover, an aliphatic diamine was incorporated in varying concentration as a flexible methylene spacer and the effect of its concentration on the properties of polyamides was also studied. Changes in various physico-chemical properties such as solubility, inherent viscosity, surface morphology and flame retarding behaviour were investigated. Marked difference in morphology and solubility was observed with the change in the ratio of segments in the chain. Inherent viscosities of polymers ranged from 1.8052–1.6274 dl/g indicating reasonably moderate molecular weights. Interestingly, ferrocene based aromatic polymers were more thermally stable (T_g 260 °C, T_i 310 °C, T_h 525 °C, T_f 720 °C, for PF₀), and also found to exhibit best flame retarding behavior (limiting oxygen index value for PF₀is LOI 33.15%).

     

Magnetron sputtered Dy_2O_3 with chromium and copper contents for antireflective thin films with enhanced absorption

Dy_2O_3 is a rare earth oxide having a number of advanced applications in various fields including protective or antireflective coatings, Main objective of this novel research work is to check the effect of Cr and Cu addition on different properties of Dy_2O_3 and achievement of antireflective thin films with enhanced abso rption. Thin films of these materials we re deposited using DC magnetron with reactive cosputtering. XRD studies reveals the crystalline nature of thin films having Dy_2O_3(222) reflection in all samples with Cr_2O_3(116) and CuO(111) reflections in Cr and Cu containing compositions. Field emission scanning electron microscopy demonstrates the homogeneous deposition of thin films with uniform shape, size and distribution of grains. Refractive index, extinction coefficient and absorption coefficient significantly increase while optical reflectance decreases with Cr and Cu mediation corroborating an improved antireflective mechanism. The imaginary part of dielectric constant is found to increase slightly with low tangent loss for Cr containing composition co nsidered favorable for energy storage applications.     

Comparison of electrothermal and hydride generation atomic absorption spectrometry for the determination of total arsenic in broiler chicken

The purpose of this study was to estimate total arsenic concentration in different tissues (leg, breast, liver and heart) of broiler chicken by hydride generation atomic absorption spectrometry (HGAAS) and graphite furnace atomic absorption spectrometry (GFAAS), prior to microwave assisted acid digestion. The accuracy of the techniques was evaluated by using certified reference material DORM-2. The percentage recoveries of total As were observed as 100.6% and 99.4% for HGAAS and GFAAS, respectively. The precision of the techniques, expressed as relative standard deviation, was observed as 1.71% and 4.18% for HGAAS and GFAAS measurements, respectively. The limits of detection for HGAAS and GFAAS were 0.025 μg/g and 0.052 μg/g, respectively. The concentrations of total arsenic in different tissues of broiler chicken were found in the range of 2.19–5.28, 2.15–5.22, 2.97–7.17 and 2.68–6.36 μg/g for leg, breast, liver and heart tissues, respectively. At a mean level of chicken consumption (60 g/person/day), people may ingest in the range of 72.0–85.1 μg arsenic/person/day from chicken alone.     

Removal of heavy‐metal ions by magnetic beads containing triazole chelating groups

The aim of this study was to prepare magnetic beads that could be used for the removal of heavy‐metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [m‐poly(EGDMA–VTAZ)] beads were produced by suspension polymerization in the presence of a magnetite Fe₃O₄ nanopowder. The specific surface area of the m‐poly(EGDMA–VTAZ) beads was 74.8 m²/g with a diameter range of 150–200 μm, and the swelling ratio was 84%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA–VTAZ) beads was 14.8%. The maximum binding capacities of the m‐poly(EGDMA–VTAZ) beads from aquous solution were 284.3 mg/g for Hg²⁺, 193.8 mg/g for Pb²⁺, 151.5 mg/g for Cu²⁺, 128.1 mg/g for Cd²⁺, and 99.4 mg/g for Zn²⁺. The affinity order on a mass basis was Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺> Zn²⁺. The binding capacities from synthetic waste water were 178.1 mg/g for Hg²⁺, 132.4 mg/g for Pb²⁺, 83.5 mg/g for Cu²⁺, 54.1 mg/g for Cd²⁺, and 32.4 mg/g for Zn²⁺. The magnetic beads could be regenerated (up to ca. 97%) by a treatment with 0.1M HNO₃. These features make m‐poly(EGDMA–VTAZ) beads potential supports for heavy‐metal removal under a magnetic field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical,Thermal and Electrical Resisitivity Properties of Thermoplastic Composites Filled with Carbon Fibers and Carbon Particles

Composites consisting of carbon fibers (CF) and carbon particles (CP) in polypropylene (PP) matrix were melt-compounded. Composites were analyzed for their mechanical, electrical and thermal properties. Results indicate that the addition of these fillers improved the mechanical properties of the composites. Thermal conductivity was enhanced as the concentration of fillers was increased. Carbon fibers render the composites electrically conductive so we observed a percolation threshold near 10 wt.% of CF for PP/CF (PP and CF composite) and near 25 wt.% of CP for PP/CP (PP and carbon particle composite). All the results indicated that carbon fibers are more effective in improving the properties as compare to the carbon particles.     

The Plastome Sequences of Triticum sphaerococcum (ABD) and Triticum turgidum subsp. durum (AB) Exhibit Evolutionary Changes,Structural Characterization,Comparative Analysis,Phylogenomics and Time Divergence

The mechanism and course of Triticum plastome evolution is currently unknown; thus, it remains unclear how Triticum plastomes evolved during recent polyploidization. Here, we report the complete plastomes of two polyploid wheat species, Triticum sphaerococcum (AABBDD) and Triticum turgidum subsp. durum (AABB), and compare them with 19 available and complete Triticum plastomes to create the first map of genomic structural variation. Both T. sphaerococcum and T. turgidum subsp. durum plastomes were found to have a quadripartite structure, with plastome lengths of 134,531 bp and 134,015 bp, respectively. Furthermore, diploid (AA), tetraploid (AB, AG) and hexaploid (ABD, AGA^m) Triticum species plastomes displayed a conserved gene content and commonly harbored an identical set of annotated unique genes. Overall, there was a positive correlation between the number of repeats and plastome size. In all plastomes, the number of tandem repeats was higher than the number of palindromic and forward repeats. We constructed a Triticum phylogeny based on the complete plastomes and 42 shared genes from 71 plastomes. We estimated the divergence of Hordeum vulgare from wheat around 11.04–11.9 million years ago (mya) using a well-resolved plastome tree. Similarly, Sitopsis species diverged 2.8–2.9 mya before Triticum urartu (AA) and Triticum monococcum (AA). Aegilops speltoides was shown to be the maternal donor of polyploid wheat genomes and diverged ~0.2–0.9 mya. The phylogeny and divergence time estimates presented here can act as a reference framework for future studies of Triticum evolution.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Dye‐affinity hollow‐fibres and their lysozyme adsorption–desorption characteristics

Dye‐affinity adsorption is increasingly used for protein separation. Hollow‐fibres have advantages as adsorbents in comparison to conventional bead supports because they are not compressible and can eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow‐fibres to which Reactive Green HE‐4BD was attached for adsorption of lysozyme. The hollow‐fibre was characterized by scanning electron microscopy. These dye‐carrying hollow‐fibres (26.3 µmol g^?1) were used in the lysozyme adsorption–elution studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached hollow‐fibres was studied in a batch system. The non‐specific adsorption of lysozyme on the polyamide hollow‐fibres was 1.8 mg g^?1. Reactive Green HE‐4BD attachment significantly increased the lysozyme adsorption up to 41.1 mg g^?1. Langmuir adsorption model was found to be applicable in interpreting lead adsorption by Reactive Green HE‐4BD attached hollow fibres. Significant amount of the adsorbed lysozyme (up to 95%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0. In order to determine the effects of adsorption conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We concluded that polyamide dye‐affinity hollow‐fibres can be applied for lysozyme adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these dye‐attached hollow‐fibres are suitable for lysozyme adsorption. © 2001 Society of Chemical Industry