Enhanced microbial oil production by activated sludge microorganisms via co‐fermentation of glucose and xylose

The co‐fermentation of glucose and xylose by activated sludge microorganisms for the production of microbial oils for use as biodiesel feedstock was investigated. Various carbon sources at initial concentration of 60 g/L and C:N ratio 70:1 were investigated: xylose, glucose, and 2:1 and 1:2 (by mass) glucose/xylose mixtures. Oil accumulation ranged between 12 to 22% CDW, the highest of which was obtained when xylose was the sole substrate used. Kinetic modeling of the fermentation data showed that specific growth and oil accumulation rates were similar in all substrate types and the lipid coefficient ranged from 0.02 to 0.06 g/g of sugar consumed. The fatty acid methyl ester yield and composition of the lipids showed their suitability for conversion to biodiesel. Based on the results, lignocellulose sugars could be used as fermentation substrates by activated sludge microorganisms for enhancing the oil content of sewage sludge for its use as a sustainable biofuel feedstock source. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4036–4044, 2013     

Extrusion deactivation of rice bran enzymes by pH modification

Rice bran is considered in Mexico as “waste”, useful only for feeds. As considerable amounts of oil are available in rice bran, it might be worthwhile to stabilize it and extract the edible oil before using it for feedstuffs. Precisely these oils are responsible for rice bran rapid deterioration, particularly in climatic conditions such as those prevalent in Mexico's tropical areas (high humidity and high temperature). This paper deals with the study of the effect of pH during extrusion of fresh rice bran in order to inactivate lipid‐breaking enzymes. Hydrochloric acid or calcium hydroxide, Ca(OH)₂, were added at 0, 1, 5, 10% (dry basis), and moisture content of the bran samples was varied (20, 30, 40%, dry basis) in a 3² factorial design to corroborate its effect at acid and alkaline pH range. Free fatty acids (FFA) increase was the control variable. Extruded samples were stored at room temperature (between 20 and 28 °C) using a non‐extruded sample as control to assess the shelf life effects. Results indicate that in acid‐extruded samples, the increase in FFA concentration after 98 days was much less than in the unmodified‐pH or alkaline samples. The lowest FFA increase after 3 months of storage time was <10 mg FFA/g rice bran using extrusion with no water or chemicals added or using extrusion adding HCl, irrespective of the moisture content of rice bran.     

Toxicity of benzotriazole and benzotriazole derivatives to three aquatic species

Benzotriazole and its derivatives comprise an important class of corrosion inhibitors, typically used as trace additives in industrial chemical mixtures such as coolants, deicers, surface coatings, cutting fluids, and hydraulic fluids. Recent studies have shown that benzotriazole derivatives are a major component of aircraft deicing fluids (ADFs) responsible for toxicity to bacteria (Microtox). Our current research compared the toxicity of benzotriazole (BT), two methylbenzotriazole (MeBT) isomers, and butylbenzotriazole (BBT). Acute toxicity assays were used to model the response of three common test organisms: Microtox bacteria (Vibrio fischeri), fathead minnow (Pimephales promelas) and water flea (Ceriodaphnia dubia). The response of all the three organisms varied over two orders of magnitude among all compounds. Vibrio fischeri was more sensitive than either C. dubia or P. promelas to all the test materials, while C. dubia was less sensitive than P. promelas. The response of test organisms to unmethylated benzotriazole and 4-methylbenzotriazole was similar, whereas 5-methylbenzotriazole was more toxic than either of these two compounds. BBT was the most toxic benzotriazole derivative tested, inducing acute toxicity at a concentration of < or = 3.3 mg/l to all organisms.     

Spatial and temporal distribution of ichthyoplankton during an unusual period of low flow in a tributary of the São Francisco River,Brazil

Flow‐dependent fish specialists require specific conditions for reproduction, so the success and reproductive intensity of these animals are determined by the flood regime. Thus, this study investigated the spatial and temporal reproductive patterns of fish, especially migratory Prochilodus species (flow‐dependent specialists) in an unusual period of low flow in the Pará River sub‐basin, one of the main tributaries of the upper São Francisco River. For this, ichthyoplankton collections were carried out between November 2013 and February 2014. Data were analysed considering the spatial and temporal variations in density of eggs and larvae for the upper, middle, and lower portions of the Pará River sub‐basin, and correlating this to some environmental variables. The results showed that the small headwater stretch of the Pará River is one relevant spawning area for migratory fish species. However, this area is isolated by the Cajuru reservoir, which makes it uncertain the recruitment of these embryos, due to interruption of natural drift between spawning/nursery areas caused for reservoirs. Larvae of newly hatched migratory species found in tributaries of the lower Pará River sub‐basin also indicate these species use these tributaries as spawning grounds and migratory routes. The period in which the research was conducted represented the most atypical low flow, one in the last 75 years, resulting in the low variability in the environmental parameters. Although few parameters increased briefly in this low flow period influenced by greater rainfall in December, this precipitation was possibly responsible for the final gonadal maturation and spawning of migratory species.     

Thermoelectric and mechanical properties of melt spun and spark plasma sintered n-type Yb- and Ba-filled skutterudites

Here we present thermoelectric and mechanical properties of n-type filled-skutterudites produced by a combination of melt spinning of pre-melted charges with subsequent consolidation by spark plasma sintering, a process we refer to as MS-SPS. This combination of processing steps leads to phase-pure n-type filled-skutterudites and obviates more energy and time intensive annealing steps. We show that both the thermoelectric properties and the tensile fracture strength compare favorably to materials made by traditional methods. The process is scalable to at least 80 g billets, such that the transport properties measured on test bars harvested from these larger billets compare favorably to those measured on lab-scale billets (5 g total billet mass). ZT values approaching 1.1 at 750 K were observed in materials made by MS-SPS. In addition, the tensile fracture strength of test bars cut from an 80 g billet is ∼128 MPa at room temperature and decreases with increasing temperature. Fractography of the test bars reveals that the majority failed due to surface and edge flaws with few failures due to volume type flaws. This indicates that the powder metallurgical methods employed to produce these samples is mature.     

On a static generalization of the Schwarzschild solution

By mean of the method of singular sources it is possible to construct gravitational multipoles which generalize the Schwarzschild solution. Talk given at the International Conference RUSGRAV-13, June 23–28, 2008, PRUR, Moscow.     

Microstructure–function relationships of heat-induced gels of porcine haemoglobin

The purpose of this work was to use image analysis to study the microstructural properties of haemoglobin gels, with structural changes induced by pH conditions, and their correlations with physical properties such as texture and water holding capacity (WHC). Two types of networks showing great differences in the dimensions of the gel structure were obtained as influenced by pH. At pH < 5.5 there was a shift from an aggregated to a fine-stranded gel type. Fractal dimension values revealed that more complex structures corresponded to softest and non-exudative gels. Lacunarity and pore size, which were used to study the pore distribution within the network, confirmed that softest gels with high WHC showed large number of small cavities. Finally, correlations between textural attributes, i.e. springiness and adhesiveness, and spatial variability, referred quantitatively to the degree of compactness, were also established.     

Dynamic formation of SEBS copolymer submicrometric structures

Highly ordered A-B-A block copolymer arrangements in the submicrometric scale, resulting from dewetting and solvent evaporation of thin films, have inspired a variety of new applications in the nanometric world. Despite the progress observed in the control of such structures, the intricate scientific phenomena related to regular patterns formation are still not completely elucidated. SEBS is a standard example of a triblock copolymer that forms spontaneously impressive pattern arrangements. From macroscopic thin liquid films of SEBS solution, several physical effects and phenomena act synergistically to achieve well-arranged patterns of stripes and/or droplets. That is, concomitant with dewetting, solvent evaporation, and Marangoni effect, Rayleigh instability and phase separation also play important role in the pattern formation. These two last effects are difficult to be followed experimentally in the nanoscale, which render difficulties to the comprehension of the whole phenomenon. In this paper, we use computational methods for image analysis, which provide quantitative morphometric data of the patterns, specifically comprising stripes fragmentation into droplets. With the help of these computational techniques, we developed an explanation for the final part of the pattern formation, i.e. structural dynamics related to the stripes fragmentation.     

Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

Department of Intelligent Hydraulics and Automation (IHA) of Tampere University of Technology has been involved in the European Fusion program since 1994 within the ITER reactor maintenance activities. In this paper we discuss the design and development of a six degrees of freedom water hydraulic manipulator with a force feedback for teleoperation tasks. The manipulator is planned to be delivered to Divertor Test Platform 2 (DTP2) during year 2008. The paper also discusses the possibility to improve the fail safe and redundant operation of the manipulator. During the design of the water hydraulic manipulator, special provisions have been made in order to meet the safety requirements such as servo valve block for redundant operation and safety vane brakes for fail safe operation.