Design and simulation of High Q MEMS LC-tank for oscillators

This research focuses on the design of a high-performance MEMS LC-tank using a high Q MEMS inductor and capacitor. A two different gap varactor has been used to avoid pull-in voltage at 2.4 GHz. The layout has been done by CoventorWare software. The DC voltage is 2.5 v, which is applied to the plates and results of 2.04 pF could be gained. The Q factor of the varactor is computed at about 557.27, which is good enough to make a low-phase noise VCO. A hollow spiral inductor with a silicon base substrate for compatibility with CMOS technology has been designed. The Greenhouse equation has been used to obtain the dimensions of the inductor. A suspended inductor has been implemented to avoid substrate coupling. The simulation has been done by CoventorWare. The Q factor of the inductor has been calculated using Yue's model. The resultant values of inductance and the Q factor at 2.4 GHz, are 2.89 nH and 27, respectively, which are in good agreement with the results of theoretical computation. The results were verified with the well-documented literature.     

Novel functionalized bis(imino)pyridine cobalt(II) catalysts for ethylene polymerization

This report describes synthesis and ethylene polymerization in the various conditions by two novel 2,6-bis(imino)pyridine (BIMP) catalysts B and C based on cobalt activated by methylaluminoxane (MAO) in a slurry semi-batch reactor. The catalyst activities as well as polymer properties were affected dramatically by electronic effects of the attached substitutions on the para-position of the pyridine ring. Theoretical study exhibited more positive charge on the central metal of the catalyst B resulted in higher activity at the expense of lower thermal stability and lifetime. The polymer obtained using the catalysts exhibited high molecular weight and almost narrow molecular weight distribution (MWD) ranging from 2.35 to 4.10 at the employed polymerization conditions. The highest and lowest molecular weight of the obtained polymers were produced by the catalyst A and C respectively. Hydrogen could slightly increase the catalyst activities with the exception of the catalyst B. The catalyst C bearing electron-donor OMe substitution at the para-position of the pyridine ring, produced PE with narrower PDI relative to the polymer resulted by catalysts A and B.     

STUDY OF HG(II) REMOVAL FROM AQUEOUS SOLUTION USING LIGNOCELLULOSIC COCONUT FIBER BIOSORBENTS: EQUILIBRIUM AND KINETIC EVALUATION

Lignocellulosic coconut wastes such as pith and fiber, which are abundantly available and cheap, have the potential of being used as low-cost biosorbents for heavy metal ion removal. In this study, pristine (CF-Pristine) and NaOH-treated (CF-NaOH) coconut fibers were used as a biosorbent for Hg(II) removal from an aqueous solution. The coconut fiber biosorbent (CFB) was characterized by scanning electron microscopy (SEM) and Fourier transform-infrared (FTIR) spectroscopy. The Hg(II) sorption capacities obtained for CF-Pristine and CF-NaOH were 144.4 and 135.0 mg/g, respectively. Both the equilibrium and kinetic data of Hg(II) sorption onto CFB followed the Langmuir isotherm model and a pseudo-second-order kinetic model, respectively. A further analysis of the kinetic data suggested that the Hg(II) sorption process was governed by both intraparticle and external mass transfer processes, in which film diffusion was the rate-limiting step. These results demonstrated that both pristine- and alkali-treated coconut wastes could be potential low-cost biosorbent alternatives for the removal of Hg(II) from aqueous solutions, such as water containing Hg(II) produced in the oil and gas industry.     

Techno-economic study of bioethanol production from olive wastes cake (OWC) in Iran

Clean Technologies and Environmental Policy - In this study, a techno-economic analysis of bioethanol production from the olive waste cake in Iran has been performed. The biofuel plant with a...     

Finding faults and influencing consumption: the role of in-home energy feedback displays in managing high-tech homes

In the context of reducing household greenhouse gas emissions, in-home energy feedback displays have been trialled as a mechanism to assist households to monitor and change energy-use behaviour. As we move towards technology-rich zero-energy homes, the challenge of managing energy use and electricity generation systems will increase and a new role for in-home feedback displays may emerge. This paper describes the in-home display and monitoring systems installed in a near-net zero-energy residential estate and provides a summary of the energy-use data generated by the systems. It also draws on 25 in-depth interviews to discuss the residents’ attitudes towards, and experiences interacting with, the in-home feedback display and energy management system. Residents describe how the feedback displays assist them to understand their end-use energy behaviour, reduce net energy use and assess whether household appliances and renewable energy systems are operating correctly. The role of energy system fault identification is highlighted by many interviewees, where the feedback displays provide the means to monitor system performance, identify system failures and maintain low-energy-use outcomes.     

Magnetic molecularly imprinted polymer nanoparticles coupled with high performance liquid chromatography for solid‐phase extraction of carvedilol in serum samples

Herein, we report a magnetic molecularly imprinted polymers (m‐MIPs) using Fe₃O₄ as a magnetic component, carvedilol as a template molecule for the solid‐phase extraction (MISPE) as the sample clean‐up technique combined with high‐performance liquid chromatography (HPLC) and for the controlled release of carvedilol at different pH values of 1.0 (simulated gastric fluid), 6.8 (simulated intestinal fluid), and 7.4 (simulated biological fluid). The adsorption kinetics was modeled with the pseudo‐first‐order and pseudo‐second‐order kinetics, and the adsorption isotherms were fitted with Langmuir and Freundlich models. The performance of the m‐MIPs for the controlled release of carvedilol was assessed and results indicated that the magnetic MIPs also have potential applications in controlled drug release. Furthermore, the m‐MIPs were applied to the extraction of carvedilol from human blood plasma samples. Carvedilol can be quantified by this method in the 2–350 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.13 and 0.45 μg L^?1. The results from HPLC showed good precision (3.5% for 50.0 μg L^?1) and recoveries (between 85 and 93) using m‐MIP from human plasma samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41209.     

First real-time detection of surface dust in a tokamak

The first real-time detection of surface dust inside a tokamak was made using an electrostatic dust detector. A fine grid of interlocking circuit traces was installed in the NSTX vessel and biased to 50 V. Impinging dust particles created a temporary short circuit and the resulting current pulse was recorded by counting electronics. The techniques used to increase the detector sensitivity by a factor of ×10,000 to match NSTX dust levels while suppressing electrical pickup are presented. The results were validated by comparison to laboratory measurements, by the null signal from a covered detector that was only sensitive to pickup, and by the dramatic increase in signal when Li particles were introduced for wall conditioning purposes.