The importance of structural and gel fractions in determining shear sensitivity of sludge.

Shear sensitivity measurements with variation of ingredients in a synthetic sludge can be related to biosolids' structural properties and particulate amount. The shear sensitivity is primarily controlled by the gel fraction, with alginate and the associated cations increasing the gel-like behavior. However the effect of particulate fraction on shear sensitivity should also be taken into account. Shear sensitivity is thus a complex parameter including two types of response: the resistance to dispersed mass concentration into centrate, and the maintenance of desired strength while the solids concentration increases in the shear field.     

Calcitonin treatment in reflex sympathetic dystrophy: a preliminary study

Reflex sympathetic dystrophy is one of the important complications effecting the rehabilitation programmes of hemiplegic patients in a negative manner by causing pain and function loss. In this study, the aim was to investigate the effects of salmon calcitonin treatment in reflex sympathetic dystrophy that develops in hemiplegia. Forty-one patients with hemiplegia resulting from cerebrovascular events and stage 1-2 reflex sympathetic dystrophy were included in the study. Salmon calcitonin, 1 x 100 IU/day intramuscularly for 4 weeks, was administered to 25 of these patients (calcitonin group) to the other 16 patients physiological saline, 1 ml/day intramuscularly for 4 weeks, was administered (control group). At the end of the fourth week of treatment the pain score of the calcitonin group was significantly lower than that of the control group. Shoulder abduction and external rotation, wrist flexion and metacarpophalangeal extension of the calcitonin group were found to be significantly better than those of the control group. In the calcitonin group the significant decrease in pain and tenderness resulted in improvement of range of motion and motor functions.     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Consistency of randomized and finite sized decision tree ensembles

Regression via classification (RvC) is a method in which a regression problem is converted into a classification problem. A discretization process is used to covert continuous target value to classes. The discretized data can be used with classifiers as a classification problem. In this paper, we use a discretization method, Extreme Randomized Discretization, in which bin boundaries are created randomly to create ensembles. We present an ensemble method for RvC problems. We show theoretically for a set of problems that if the number of bins is three, the proposed ensembles for RvC perform better than RvC with the equal-width discretization method. We use these results to show that infinite-sized ensembles, consisting of finite-sized decision trees, created by a pure randomized method (split points are created randomly), are not consistent. We also theoretically show, using a set of regression problems, that the performance of these ensembles is dependent on the size of member decision trees.     

Automatic design of marine structures by using successive response surface method

An automated optimization procedure based on successive response surface method is presented. The method is applied to weight optimization of a stiffened plate used in marine structures. In the design space the surrogate model is spanned sequentially into an optimally restricted subspace that is converging towards at least a local optimum. Both objective function and all constraint functions are modeled using linear response surface method enabling the use of a robust and efficient simplex algorithm for the optimizations. Special attention is paid to CAD and FEM-model linking that plays a central role in practical industrial applications. In this project SOLIDWORKS and ANSYS software are adopted for structural modeling and analysis, respectively, and the optimization is carried out in a MatLab environment. The reported results achieved in this project prove the robustness and effectiveness of the proposed approach.     

Medium chain triglyceride in early life: Effects on growth of adipose tissue

Effects of feeding early in life a diet high in either long chain (LCT) or medium chain triglyceride (MCT) were studied on the development of adipose tissue in post-weanling rats. The diets were similar in calorie distribution and identical in nutrients except for type of fat. The caloric distribution of the two diets by percent was LCT (corn oil)/protein/carbohydrate, 70/18/12 and MCT/corn oil/protein/carbohydrate, 66/4/18/12. Male littermates with less than 5% weight difference were pair-fed the two diets randomly at age 18–20 days. One-fourth of the rats were killed at 10, 16, 22 and 28 weeks of age and analyzed for adipose depots and adipose tissue cellularity. Results showed that the LCT-fed rats were significantly heavier, with larger epididymal, retroperitoneal, omental and subcutaneous fat pads than the respective pair-fed MCT rats. Also, LCT-fed rats had larger size and number of adipocytes than MCT-fed littermates. It is concluded that the type of fat in the diet, namely LCT or MCT, when fed early in life can influence the development of adipose tissue. MCT appears less lipogenic than LCT. The mechanism for the diminished adiposity of MCT-fed rats is related to extensive oxidation of MCT and its enhancement of thermogenesis leading to lessened energy efficiency. Presented at the symposium on “Specialty Lipids and Their Biofunctionality” at the annual meeting of the American Oil Chemists' Society, Philadelphia, May 1985.     

A reverse osmosis desalting plant operated by gas turbines

Power plants in Kuwait use gas turbines (GT) only for a few hours to produce power at peak load times. Peak loadoccurs in the summer due to the air-conditioning load. As an example, the average number of operating hours for six gas turbines in the Doha East power plant was 16 in the summer of 2001. There is little concern about efficiency of these GT since they work for a very short time during the year. However, a recent increase in desalted seawater demand suggests the use of these GT to operate reverse osmosis (RO) desalting systems all year around. The summer outside design temperature in Kuwait for air-conditioning calculations is 48°C dry bulb temperature (DBT), and 28°C wet bulb temperature (WBT); but the ambient temperature can easily reach 60°C. Gas turbine power output and efficiency are drastically reduced by the increase in temperature of intake air to the gas turbine's compressor, especially during harsh Kuwaiti summer conditions. Thus, it is essential to investigate cooling of air intake to the GT compressor. The performance of a typical GT unit and its ability to produce desalted waterby a RO desalting system at different ambient temperatures are presented. Calculation of needed capacities for the cooling of intake air to the GT compressor was performed for evaporative cooling, single and multiple mechanical vapor compression cycles, and combined indirect evaporation cooling with the refrigeration system. The improvements of power output and efficiency due to the cooling of air intake of the GT and the resulting increase in desalted water are also presented.     

Color object segmentation and tracking using flexible statistical model and level-set

Multimedia Tools and Applications - This study presents an unsupervised novel algorithm for color image segmentation, object detection and tracking based on unsupervised learning step followed with...     

A novel secure solution of using mixed reality in data transmission for bowel and jaw surgical telepresence: enhanced rivest cipher RC6 block cipher

Security threats are crucial challenges that deter Mixed reality (MR) communication in medical telepresence. This research aims to improve the security by reducing the chances of types of various attacks occurring during the real-time data transmission in surgical telepresence as well as reduce the time of the cryptographic algorithm and keep the quality of the media used. The proposed model consists of an enhanced RC6 algorithm in combination. Dynamic keys are generated from the RC6 algorithm mixed with RC4 to create dynamic S-box and permutation table, preventing various known attacks during the real-time data transmission. For every next session, a new key is created, avoiding possible reuse of the same key from the attacker. The results obtained from our proposed system are showing better performance compared to the state of art. The resistance to the tested attacks is measured throughout the entropy, Pick to Signal Noise Ratio (PSNR) is decreased for the encrypted image than the state of art, structural similarity index (SSIM) closer to zero. The execution time of the algorithm is decreased for an average of 20%. The proposed system is focusing on preventing the brute force attack occurred during the surgical telepresence data transmission. The paper proposes a framework that enhances the security related to data transmission during surgeries with acceptable performance.

     

Laser melting of Ti-15Al-20Nb alloy

Titanium aluminides have become promising materials for high-temperature applications, but the relatively poor oxidation resistance and elevated- temperature strength of these alloys limit their application to temperatures lower than 1000 °C. Niobium addition improves the properties of titanium aluminide. However, the mechanical, metallurgical, and corrosion properties of Ti- Al- Nb may be improved by treatment with a laser beam. Consequently, the present study examines the properties of Ti- 15Al- 20Nb alloy subjected to the Nd:YAG laser melting process. Hardness in the surface region increases to twice the base material hardness, and corrosion resistance improves considerably after laser treatment.