A comparison analysis of prefiltering methods in space-time trellis-based reduced-state turbo-detection

In this paper, we investigate two different prefiltering strategies, i.e., multiple input multiple output (MIMO) channel shortening and MIMO whitened matched filtering, to decode iteratively a space time bit interleaved coded modulation transmitted over MIMO block fading intersymbol interference channels using a trellis-based post-detector. Indeed, resorting to such front-ends allows significant complexity gain when compared to the optimal maximum a posteriori-based turbo-receiver. While those two approaches have been exhaustively visited in the past, their fair comparison in terms of trade-off between complexity and performance has – to our knowledge – never been tackled before. This paper aims at giving some valuable insights about the respective benefits of these two prefiltering methods with respect to the channel characteristics and overall receiver complexity.     

Transient electromagnetic field of a vertical magnetic dipole on atwo-layer conducting Earth

The transient field-frequency domain of magnetic dipole in a two-layered conducting Earth has been studied. It is obtained as a summation of waveguide modes plus contributions from branch cuts in the complex-plane of the longitudinal wave number. Results can be used to evaluate numerical solutions of more complicated modeling algorithms     

The role of human factors in flexibility management: A survey

Flexibility can be defined as the ability to respond effectively to the ever‐changing and increasing needs of the customer. For this demand to be satisfied, flexibility should be built into the total chain of acquisition, processing, and distribution stages. As a result, there is an increasing interest in flexibility and flexibility enabling mechanisms/parameters to achieve the best strategy for obtaining the right and desired output. Although quite a number of flexibility definitions and mechanisms can be found in the literature, flexibility remains poorly understood and utilized in practice. That is due to the lack of standardization in the terminology about the flexibility definitions and mechanisms. This article presents the finding of an extensive literature survey to determine the Intra flexibility mechanisms/parameters. These mechanisms/parameters are then classified, according to their contribution to the supply chain stages and their interaction with Inter Flexibility mechanisms (e.g., Organizational structure flexibility, Technology flexibility, Information system flexibility, and Human resource flexibility). In addition, the crucial role of human factors and its relationship with flexibility mechanisms are investigated, and related flexibility mechanisms are identified. © 2002 John Wiley & Sons, Inc.     

Assessment of anastomotic reliability with pulse oximetry in graded intestinal ischemia: an experimental study in dogs

BACKGROUND/PURPOSE: Pulse oximetry has been proposed as an appropriate and feasible technique in the assessment of intestinal ischemia in recent years. In this study the authors aimed to assess the reliability of anastomoses in the dog small intestine in which there is graded irreversible ischemia as measured by pulse oxymeter. METHODS: In a control group of four dogs, without any devascularization, three small bowel anastomoses were formed in each dog. The study group consisted of 12 dogs. In each animal three intestinal segments with different levels of ischemia were created by ligating the marginal vessels proximally and distally in sequence beginning from the midpoint of the segmental vascular arcade. Preanastomotic pulse oximeter readings between 80% and 90% were assigned to mild ischemia, 70% and 80% to moderate, and 60% and 70% to severe ischemia group. Pulse oximetry measurements were obtained from probes applied to the antimesenteric serosal surfaces at the midpoint of small intestinal segments. A total of 48 intestinal segments (12 nonischemic in the control group and 36 with three different levels of ischemia in the study group) were transected in the midpoint and anastomosed in double layers. Postanastomotic SaO2 values were also noted. The anastomoses were evaluated 48 hours later macroscopically if there was any leakage, and biopsy specimens were obtained for histopathologic ischemic gradings. All results were studied statistically. RESULTS: Histopathologic grades between each group were statistically different (P < .01 for each comparison) except for control and mild ischemia groups (P > .05), worsening as the level of ischemia increased. Pre- and postanastomotic pulse oximetry measurements correlated very well with the histological gradings (r = -0.90, P < .001 and r = -0.93, P < 0.001 respectively). Number of anastomotic leakages were none in control, one in mild, nine in moderate, and 12 (all of the anastomoses) in severe ischemia groups. In the moderate ischemia group with an average preanastomotic pulse reading of 76.75%, each of the leaking anastomoses had a postanastomotic pulse measurement of lower than 70%. The finding that the difference between histopathologic grades of control and mild ischemia groups with average preanastomotic pulse measurements of 96% and 85%, respectively is not statistically significant enables us to suggest that a saturation of at least 85% is necessary for a reliable anastomosis. CONCLUSION: These results suggest clearly that anastomotic reliability can be predicted objectively with pulse oximetry.     

Determination of flavan-3-ols and trans-resveratrol in grapes and wine using HPLC with fluorescence detection

Concentrations of trans-resveratrol, catechin and epicatechin were analyzed in musts and wines produced from seven red and four white grape cultivars from various wine growing regions of Turkey. Phenolics were quantified using an HPLC method optimized for the separation of wine phenolics. Wine samples contained higher phenolics levels than the corresponding musts. With the exception of Semillion, white wines and musts contained lower concentrations of phenolics than red wines and musts. However, the white cultivar Semillion had the highest concentrations of catechin and epicatechin among all wine and must samples. Semillion wine catechin and epicatechin were 13.7 and 11.8 mg/L, respectively. The highest level of trans-resveratrol among the white cultivars was found in Narince wine (1.93 mg/L). Within the red wine and must cultivars, Bo?azkere, Öküzgozü, and Cabernet contained the highest concentrations of flavan-3-ols and trans-resveratrol. Catechin was the major phenolic in all wines and most musts. Epicatechin was the major phenolic in 6 of the 11 must samples, but none of the wine samples. trans-Resveratrol was generally found in lowest concentrations in both wines and musts.     

Temperature modeling and measurement of an electrokinetic separation chip

This work presents experimental [infrared (IR) thermography] and computational (finite element model) results of temperature distributions of an electrokinetic separation chip. Thermal characteristics of both the electrolyte solution and the polymer chip (SU-8) are taken into account in modeling temperature distributions during electrokinetic flow. Multiphysics and multiscale simulation couples electrostatics, heat transfer, and fluid dynamics. The accompanying IR thermography is a non-contact method, which can measure fractional temperature differences with sub-second time resolution. Any structures or temperature marker molecules interfering with the experiment are not needed. Nominal spot size in the IR measurements is 30 μm with a field of view of several millimeters enabling both local and chip-scale temperature monitoring simultaneously. As a result, we present a computer model for electrokinetic chips, which enables simulation of fractional temperature changes during electrophoresis under real operating conditions. The accuracy of the model is within ±1°C when the deviation in electrochemical processes is taken into account. The simulation results also suggest that the temperature on the chip surface qualitatively reflects the temperature inside the microchannel with an average offset of 1–2°C.     

Modal Identification Study of Vincent Thomas Bridge Using Simulated Wind-Induced Ambient Vibration Data

Abstract:   In this article, wind-induced vibration response of Vincent Thomas Bridge, a suspension bridge located in San Pedro near Los Angeles, California, is simulated using a detailed three-dimensional finite element model of the bridge and a state-of-the-art stochastic wind excitation model. Based on the simulated wind-induced vibration data, the modal parameters (natural frequencies, damping ratios, and mode shapes) of the bridge are identified using the data-driven stochastic subspace identification method. The identified modal parameters are verified by the computed eigenproperties of the bridge model. Finally, effects of measurement noise on the system identification results are studied by adding zero-mean Gaussian white noise processes to the simulated response data. Statistical properties of the identified modal parameters are investigated under an increasing level of measurement noise. The framework presented in this article will allow us to investigate the effects of various realistic damage scenarios in long-span cable-supported (suspension and cable-stayed) bridges on changes in modal identification results. Such studies are required to develop robust and reliable vibration-based structural health monitoring methods for this type of bridge, which is a long-term research objective of the authors.     

Laser Treatment of Sintered Silicon Carbide Surface for Enhanced Hydrophobicity

In this study, laser treatment of sintered SiC surfaces is carried out to enhance the surface hydrophobicity. Morphological and metallurgical changes of the treated surfaces are evaluated using optical and scanning electron microscopy, energy dispersive spectroscopy, and x-ray diffraction (XRD). Microhardness and fracture toughness are measured using indentation tests. The residual stresses present are determined using the XRD technique. The wetting characteristics of the treated surfaces are assessed through contact angle measurements. It is found that the laser-treated surfaces consist of fine grooves and pillars and that the resulting surface roughness enhances the surface hydrophobicity. The fracture toughness of the treated surface is reduced possibly because of the microhardness increase at the surface. The residual stress formed in the surface region is on the order of 1.8 GPa, and it is compressive.     

A study of parameters affecting the continuous CO2 laser cuts

Abstract

This work attempts to discover, by experimentation, some of the parameters governing cutting efficiency in perspex of a continuous CO₂ laser. The experimentation took the form of taking cuts in specimen pieces with the laser. While varying the parameters of speed of cut and position of the focal plane of the laser beam relative to the surface of the perspex, all other parameters were kept constant. These experiments produced conclusive ideas of the optimum position of the focal plane and the best speeds for cutting perspex at the same time producing the best cut quality obtainable. When the theoretically predicted minimum cut width is compared with the experimentally obtained results, the agreement is found to be almost exact.     

Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.