Survey on communication architectures for wind energy integration with the smart grid

Communication systems are needed to integrate generated power from wind farms with the electrical grid. This paper provides a comprehensive review of available communication technologies, protocols and objectives related to wind energy and electrical grid integration. This paper summarizes the communication system solutions for wind generation. A major obstacle is an absence of unified communication architectures and standards.     

Effect of root pass filler metal on microstructure and mechanical properties in the multi-pass welding of duplex stainless steels

This paper is focused on the estimation of the effect of root pass chemical composition, in multi-pass GTA Weldments, on microstructure and mechanical properties of duplex stainless steel welds. We used two different filler metals, the super duplex ER 2594 and duplex ER 2209. Microstructures of different passes of welded joints are investigated using optical microscope and scanning electron microscope. The relationship between mechanical properties, corrosion resistance, and microstructure of welded joints is evaluated. It is found that the tensile and toughness properties of the first weldment, employing the combination of ER 2594 in the root pass and ER 2209 in the remaining, are better than that of the second weldment employing ER 2209 all passes, due to the root pass grains refinement and its alloy elements content as chromium Cr and nitrogen N. The microstructure indicates the presence of austenite in different forms on the weld zone of ER 2209, same in the case of ER 2594, but with higher content and finer grains size, in particular Widmanstätten austenite WA. Potentiodynamic polarization tests of the first weld metal evaluated in 3.5% NaCl solution at room temperature have been demonstrated a corrosion resistance higher than that of the second weld metal. This work addressed the improvement of the corrosion resistance using appropriate filler metal without getting any structural heterogeneity and detrimental changes in the mechanical properties.     

Insights into corrosion in dye solar cells

The main issue in using low cost metals in dye solar cells is the corrosion caused by the liquid electrolyte. Contrary to typical applications of metals, the adverse effects of corrosion in dye solar cells are related to irreversible depletion of charge carriers from the electrolyte rather than consumption of the metal itself. It is calculated that the penetration rate due to corrosion should not exceed 10⁻⁴ mpy (a couple of nanometers per year) to ensure device lifetime longer than 1 year. This is 10 000 times slower rate than what is considered to be a general benchmark value for very low corrosion rate in the field of corrosion science and has a major effect on how corrosion should be investigated in the case of dye solar cells. Different methods, their applicability, and limitations to investigate corrosion in dye solar cells are evaluated here. The issue with most techniques is that they can detect metals that are clearly corroding, but they have significant limitations in proving a metal stable. Our investigation shows that the most reliable information on corrosion is obtained from complete dye solar cells that are exposed to working conditions. A combination of color analysis of the electrolyte to such measurement is proposed as a means to extrapolate future performance of the cells and estimate potential lifetimes of the dye solar cells in regards to corrosion. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of Coronavirus Pandemic Crisis on Technologies and Cloud Computing Applications

In light of the coronavirus disease 2019 (COVID-19) outbreak caused by the novel coronavirus, companies and institutions have instructed their employees to work from home as a precautionary measure to reduce the risk of contagion. Employees, however, have been exposed to different security risks because of working from home. Moreover, the rapid global spread of COVID-19 has increased the volume of data generated from various sources. Working from home depends mainly on cloud computing (CC) applications that help employees to efficiently accomplish their tasks. The cloud computing environment (CCE) is an unsung hero in the COVID-19 pandemic crisis. It consists of the fast-paced practices for services that reflect the trend of rapidly deployable applications for maintaining data. Despite the increase in the use of CC applications, there is an ongoing research challenge in the domains of CCE concerning data, guaranteeing security, and the availability of CC applications. This paper, to the best of our knowledge, is the first paper that thoroughly explains the impact of the COVID-19 pandemic on CCE. Additionally, this paper also highlights the security risks of working from home during the COVID-19 pandemic.     

Theranostic Interpolation of Genomic Instability in Breast Cancer

Breast cancer is a diverse disease caused by mutations in multiple genes accompanying epigenetic aberrations of hazardous genes and protein pathways, which distress tumor-suppressor genes and the expression of oncogenes. Alteration in any of the several physiological mechanisms such as cell cycle checkpoints, DNA repair machinery, mitotic checkpoints, and telomere maintenance results in genomic instability. Theranostic has the potential to foretell and estimate therapy response, contributing a valuable opportunity to modify the ongoing treatments and has developed new treatment strategies in a personalized manner. “Omics” technologies play a key role while studying genomic instability in breast cancer, and broadly include various aspects of proteomics, genomics, metabolomics, and tumor grading. Certain computational techniques have been designed to facilitate the early diagnosis of cancer and predict disease-specific therapies, which can produce many effective results. Several diverse tools are used to investigate genomic instability and underlying mechanisms. The current review aimed to explore the genomic landscape, tumor heterogeneity, and possible mechanisms of genomic instability involved in initiating breast cancer. We also discuss the implications of computational biology regarding mutational and pathway analyses, identification of prognostic markers, and the development of strategies for precision medicine. We also review different technologies required for the investigation of genomic instability in breast cancer cells, including recent therapeutic and preventive advances in breast cancer.     

Oxidation stability and compositional characteristics of oils from microwave roasted pumpkin seeds during thermal oxidation

The oxidative stability and compositional characteristics of the pumpkin seed oil (PSO) exposed to microwaves were studied during heating at 170°C. The oxidative indices such as free fatty acid (FFA), peroxide value (PV), p-anisidine value (p-AV), TOTOX, specific extinctions and thiobarbituric acid (TBA) value of oils were significantly increased, and the increments were found to be significantly higher (P < 0.05) in unroasted seed oil as compared to roasted seed oil. The relative contents of polyunsaturated fatty acids (PUFAs) were decreased to 84.7%, and saturated fatty acids (SFAs) were increased to 119.5% in unroasted sample, after 9 h of heating. On the other hand, in 12 min roasted samples, the relative contents of PUFAs were decreased to 97.0%, and SFAs were increased to 102.6% after 9 h of heating. The triacylglycerol species LLL and OLL levels were decreased as a consequence of increased heating time, and the reduction tended to be significantly higher in unroasted samples as compared to roasted ones. The oxidation products formed were also investigated by FTIR. The present results indicated that microwave roasting of pumpkin seeds markedly enhanced the oxidative stability of the oils during heating.     

Role of brown adipose tissue in thermogenesis induced by overfeeding a diet containing medium chain triglyceride

The role of brown adipose tissue in the mechanism of medium chain triglyceride (MCT)-induced thermogenesis was investigated. Under anesthesia, the interscapular brown adipose tissue (IBAT) was excised in male Sprague-Dawley rats, and the animals were fitted with gastrostomy tubes. After a 10-day recovery period, the animals were divided into two groups: one group received a diet containing MCT as 50% of calories, and the other group received an isocaloric diet containing long chain triglyceride (LCT). The diets were fed for 6 wk at a level of calorie intake that was 150% of the ad libitum intake of a parallel control group. During the last week of the study, resting and norepinephrine (NE)-stimulated O₂ consumption and CO₂ production were measured in a Noyons diaferometer. At the end of 6 wk, the animals were weighed and killed. The individual fat pads were dissected and weighed, and an aliquot of the right retroperitoneal fat pad was used to measure adipocyte size and number. The results showed that body weight and adipocyte size (but not adipocyte number) were significantly smaller in the MCT-fed compared to the LCT-fed animals. Resting as well as maximal NE-stimulated oxygen consumption values were significantly higher in the MCT-fed than the LCT-fed rats. It is concluded that the enhanced thermogenesis induced by MCT persists despite the absence of IBAT and that the phenomenon is likely related to more extensive oxidation of MCT-in contrast to LCT-derived fatty acids, thus leading to increased oxygen consumption, enhanced dissipation of energy as heat and diminished efficiency of weight gain and deposition of body fat. Presented at the symposium on “Specialty Lipids and Their Biofunctionality” at the annual meeting of the American Oil Chemists' Society, Philadelphia, May 1985.     

Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (~10 nm). With silver addition, small spherical silver metal particles (~2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism.     

Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.     

Characteristics of heat transfer of impingement system with swap swirl generator

This article presents the computational fluid dynamic simulation of the heat transfer characteristics induced by a swap swirl air‐jet generator on the impingement surface. The study was carried out for conventional and swap twist tape inserts of twisted ratio y = 2.93 with various swap angles (α = 30°, 60°, 90°) at a constant distance of nozzle diameter impingement plate (L = 2D). The results show that the Nusselt number of the swirl impingement air‐jet depends on the twisted tape swap angles and airflow rate. The results also showed that the swap angle of 90° gave notable uniform local heat transfer distribution compared with the typical twist tape and other swap twist tapes (α = 30°, 60°). In addition, the predicted results of the local heat transfer coefficient help explain the local turbulence intensity and generation to assist the industrial applications of swirl impingement air‐cooling jet.