Optimization of Vane-Parameters for Gain-Frequency Response of Vane-Loaded Gyro-TWT

This paper discusses an analytical method to study the effects of the vane-parameters on the gain-frequency response of an azimuthally periodic vane-loaded cylindrical waveguide interaction structure for the gyro-traveling wave tube (gyro-TWT) amplifier in the small-orbit TE₀₁ waveguide mode configuration. The vane-loaded gyro-TWT enables the higher gain than that of the smooth-wall device. An optimum choice of the vane dimensions causes a change in the frequency corresponding to the peak-gain.     

An Effect of Nonferromagnetic Gaps on the Magnetic Properties of Stacks of Steel Plates with Different Values of Magnetic Hardness: I. A Closed Circuit

Stacks of steel plates having different values of magnetic hardness and separated with nonferromagnetic gaps are investigated. The coercive force and the residual magnetic induction of a stack measured in a closed magnetic circuit depend on the layout of the plates in the stack and on the thickness of nonmagnetic gaps between them.__________Translated from Defektoskopiya, Vol. 41, No. 3, 2005, pp. 55–62.Original Russian Text Copyright © 2005 by Gorkunov, Mitropol’skaya, Povolotskaya.Dedicated to the Anniversary of the 100th Birthday of Corresponding Member of the Russian Academy of Sciences M. N. Mikheev     

Inspection of the Strength Characteristics and Heat-Treatment Quality of Ferromagnetic Articles Based on Parameters of the Residual-Magnetization Hysteresis Loop upon Their Local Magnetization and Magnetization Reversal in a Pulsed Magnetic Field with a Variable Amplitude: I. Parameters of the Hysteresis Loop

Results of an experimental study of the anomalous behavior of the residual-magnetization hysteresis of ferromagnetic articles that, under local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude, were subjected to heat treatment under different conditions are reported. Parameters of the hysteresis and their dependence on the magnetization and magnetization-reversal conditions, as well as on the magnetic properties of a material, are considered.__________Translated from Defektoskopiya, Vol. 41, No. 5, 2005, pp. 3–13.Original Russian Text Copyright © 2005 by Matyuk, Mel’gui, Pinchukov, Lyubarets.All papers in this issue are devoted to the 100th anniversary of the birth of the late M.N. Mikheev, corresponding member of the Russian Academy of Sciences and one of the founders of magnetic structural analysis.     

An array-compensated spherical reflector antenna for a very large number of scanned beams

There are many stringent demands imposed on the applications of spaceborne antenna systems. One of the most challenging demands is the generation of multiple beams with the ability to scan a very large number of beamwidths. Since the parabolic reflectors have limitations in this application, a 35-m spherical reflector antenna is proposed for a geostationary radar antenna at Ka-band (35.6 GHz) due to its inherent capability of scanning the beams to very large number of beamwidths. The utility of using planar array feeds for correcting spherical phase aberrations is investigated to overcome the performance degradation effects. Two different methodologies are developed for the array excitation coefficients determination based on phase conjugate matching and the results are compared. Using the compensating feed array, the radiation characteristics of the compensated spherical reflector are simulated for no scan and large scan cases and the results are compared with the uncompensated case to show performance improvement. In order to demonstrate the technological readiness of the concept a 1.5-m breadboard model is designed to be built for experimental measurements. Some important mechanical design tolerances and realistic array feed topologies are investigated. The antenna concept developed in this paper is advocated to be used in the next generation of geostationary satellite antenna systems for remote sensing radar applications.     

A time-based energy-efficient analog-to-digital converter

Dual-slope converters use time to perform analog-to-digital conversion but require 2/sup N+1/ clock cycles to achieve N bits of precision. We describe a novel current-mode algorithm that also uses time to perform analog-to-digital conversion but requires 5N clock cycles to achieve N bits of precision via a successive subranging technique. The algorithm requires one asynchronous comparator, two capacitors, one current source, and a state machine. Amplification of two is achieved without the use of an explicit amplifier by simply doing things twice in time. The use of alternating voltage-to-time and time-to-voltage conversions provides natural error cancellation of comparator offset and delay, 1/f noise, and switching charge-injection. The use of few components and an efficient mechanism for amplification and error cancellation allow for energy-efficient operation: in a 0.35-/spl mu/m implementation, we were able to achieve 12 bit of DNL limited precision or 11 bit of thermal noise-limited precision at a sampling frequency of 31.25 kHz with 75 /spl mu/W of total analog and digital power consumption. These numbers yield a thermal noise-limited energy efficiency of 1.17 pJ per quantization level, making it one of the most energy-efficient converters to date in the 10-12 bit precision range.     

Multiple quasi-phase-matched device using continuous phase modulation of /spl chi//sup (2)/ grating and its application to variable wavelength conversion

We propose a new multiple quasi-phase-matched wavelength converter based on the continuous phase modulation of a /spl chi//sup (2)/ grating for use in variable wavelength conversion. A numerical study shows that the proposed device exhibits a high conversion efficiency, flexible design, and robust fabrication tolerance. A waveguide device fabricated by annealed proton exchange agrees well with the numerical design. Fine-tuning the device enabled us to demonstrate variable wavelength conversion between signals on the standard optical frequency grid. Using the device, we also demonstrated fast (<100 ps) wavelength switching of 4-channel 40-Gb/s signals. The obtained results clearly show that the proposed multiple quasi-phase-matched devices will be useful when constructing future flexible photonic networks.     

Dual Gabor frames: theory and computational aspects

We consider a general method for constructing dual Gabor elements different from the canonical dual. Our approach is based on combining two Gabor frames such that the generated frame-type operator S/sub g,/spl gamma// is nonsingular. We provide necessary and sufficient conditions on the Gabor window functions g and /spl gamma/ such that S/sub g,/spl gamma// is nonsingular for rational oversampling, considering both the continuous-time and the discrete-time settings. In contrast to the frame operator, the operator S/sub g,/spl gamma// is, in general, not positive. Therefore, all results in Gabor analysis that are based on the positivity of the frame operator cannot be applied directly. The advantage of the proposed characterization is that the algebraic system for computing the Gabor dual elements preserves the high structure of usual Gabor frames, leading to computationally efficient algorithms. In particular, we consider examples in which both the condition number and the computational complexity in computing the proposed dual Gabor elements decrease in comparison to the canonical dual Gabor elements.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

Intraoperative neurological monitoring

Intraoperative neurological monitoring (INM) is the evaluation of the nervous system within the operating room (OR) environment. In this paper, the INM system is tested in a clinical setting in comparison with conventional somatosensory evoked potential (SEP) monitoring. The study results demonstrate the capability of the INM system in extracting clearer and more stable SEP signals. The high SNR of SEP signals collected in various clinical environments, including the OR, makes the INM system a robust platform for continuous monitoring. While the current use of EP monitoring is limited to intermittent analysis by a highly trained clinical neurophysiologist, the authors believe in changing this paradigm by developing continuous monitoring systems, such as the INM system, capable of automated quantitative EP analysis. This noninvasive monitoring modality will allow for a wider range of use in clinical practice. Based on volunteer and clinical patient studies, the INM monitoring system demonstrates much greater reliability and accuracy via the artifact rejection and denoising strategies. It provides more strategic filtering options for different situations under which the clinical SEP response signal could be greatly contaminated and distorted. Furthermore, the INM system offers a promising approach to signal extraction in real-time monitoring during SEP research.     

Rheological properties of polypropylene modified by high‐intensity ultrasonic waves

A new method using high‐intensity ultrasonic waves, instead of peroxide‐aided reactive extrusion, was applied to modify a linear polypropylene into a branched structure. The ultrasonic waves induced chain scission and created reactive macromolecules of polypropylene successfully in the melt state without any peroxide. To enhance and control the recombination reaction during sonication, a multifunctional agent and an antioxidant were used. The rheological property measurements clearly confirmed that the modified polypropylene had a nonlinear branched structure. It showed shear‐thinning behaviors in its viscosities at low frequencies, high elastic behaviors in Cole–Cole plots, and a high rheological polydispersity index in comparison with a linear polypropylene. The degradation or recombination of polypropylene was adequately controlled by an antioxidant, which stabilized the structure during sonication. Also, the use of an antioxidant was quite effective in improving the extrusion processability by delaying the instability of the extrudate to a higher shear rate. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006