Prodynorphin and Proenkephalin in Cerebrospinal Fluid of Sporadic Creutzfeldt–Jakob Disease

Proenkephalin (PENK) and prodynorphin (PDYN) are endogenous opioid peptides mainly produced in the striatum and, to a lesser extent, in the cerebral cortex. Dysregulated metabolism and altered cerebrospinal fluid (CSF) levels of PENK and PDYN have been described in several neurodegenerative diseases. However, no study to date investigated these peptides in the CSF of sporadic Creutzfeldt–Jakob disease (sCJD). Using liquid chromatography-multiple reaction monitoring mass spectrometry, we evaluated the CSF PDYN- and PENK-derived peptide levels in 25 controls and 63 patients with sCJD belonging to the most prevalent molecular subtypes (MM(V)1, VV2 and MV2K). One of the PENK-derived peptides was significantly decreased in each sCJD subtype compared to the controls without a difference among subtypes. Conversely, PDYN-derived peptides were selectively decreased in the CSF of sCJD MV2K, a subtype with a more widespread overall pathology compared to the sCJD MM(V)1 and the VV2 subtypes, which we confirmed by semiquantitative analysis of cortical and striatal neuronal loss and astrocytosis. In sCJD CSF PENK and PDYN were associated with CSF biomarkers of neurodegeneration but not with clinical variables and showed a poor diagnostic performance. CSF PDYN and PENK-derived peptides had no significant diagnostic and prognostic values in sCJD; however, the distinct marker levels between molecular subtypes might help to better understand the basis of phenotypic heterogeneity determined by divergent neuronal targeting.     

Discontinuous Precipitation and Phase Stability In Re- and Ru-Containing Nickel-Base Superalloys

The phase stability of nickel-base superalloys has been investigated using a new in-house-designed alloy series with stepwise increased additions of Re and Ru at otherwise fixed atomic fractions of alloying elements. Results presented in this study are focused on the lesser-known topologically closed packed (TCP) formation of columnar colonies or so-called discontinuous precipitation. A detailed investigation of these colonies allowed for identifying compositional changes during the growth process and for providing a three-dimensional (3-D) illustration of the TCP phases within these colonies. The results were used to compare the colony growth process with existing growth models. Furthermore, the influence of Re and Ru on the appearance of discontinuous precipitation has been investigated by means of colony width and the effect on creep properties. Larson-Miller plots are given to illustrate the creep strength of directionally solidified samples with and without TCP colonies compared with single crystalline samples free from TCP colonies.     

Newly designed polyacrylamide/dextran gels for electrophoresis protein separation: synthesis and characterization

Newly designed gels for electrophoresis protein separation were synthesized from acrylamide, N,N′‐methylenebis (acrylamide) and dextran mixtures. Radical polymerization was initiated by ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine. The time dependence of absorbance during polymerization was monitored using UV‐visible spectroscopy. The exothermic polymerization process exhibited a sharp rise of temperature reminiscent of the Trommsdorff effect. The swelling kinetics of the synthesized gels was examined in deionized water and buffer solutions. One of the challenges was to find an alternative to commercial products, sold as mixtures with no detailed chemical contents, commonly used in sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS‐PAGE) for protein separation. For this reason, a systematic comparison was made of the properties of one of the most commonly used commercial gels, Duracryl^? from Genomics Solution Inc., and those of the synthesized polyacrylamide/dextran gels. Copyright © 2011 Society of Chemical Industry     

On the Strategic Impact of the Degenerative Transfer of Xanthates on Synthetic Planning

The present brief account relates synthetic endeavours revolving around a novel chemistry of xanthates (dithiocarbonates) being developed in our group. The degenerative reversible transfer of xanthates has a unique ability to store reactive radicals in a dormant form, and thereby to enhance their lifetime in a concentrated medium, while at the same time, regulating their absolute and relative concentrations. It allows intermolecular radical additions even to unactivated alkenes, and can promote otherwise sluggish radical processes, such as 5-endo, 6-exo, 6-endo, 7-endo, and 8-endo cyclisations, as well as ring closures on (hetero)aromatic structures. This chemistry has proved remarkably versatile and powerful, both for solving synthetic problems and for the industrial production of block copolymers through the RAFT/MADIX technology.     

Effects of nematic coupling on the phase behaviour of nematogen mixtures

The phase behaviour of binary nematogen mixtures of side‐chain liquid crystal crosslinked polymers and low molecular weight liquid crystals is investigated with particular emphasis on the effects of nematic coupling. The cross nematic quadrupole parameter ν₁₂ is assumed to be proportional to the geometric average of ν₁₁ and ν₂₂ characteristic of single nematogens. In the weak coupling limit, the proportionality constant is lower than 1, and the phase diagram exhibits a reduced miscibility of the nematogens. In the case of strong coupling, the proportionality constant exceeds 1 resulting in higher miscibility. This is characterized by a nematic order that extends to temperatures above the upper nematic–isotropic transition temperature. A wide region of miscibility emerges showing a single nematic phase. Nematogens having similar nematic–isotropic transition temperatures exhibit different phase properties from systems with widely separated transition temperatures. Effects of the polymer volume fraction at crosslinking, rubber elasticity parameters of the network, and the Flory–Huggins interaction parameter on the equilibrium phase diagram of these systems are discussed. © 2001 Society of Chemical Industry     

Thermomechanical material parameters characterization of the superalloy PN 3601669-7 under low-velocity impacts

This work concerns the characterization of the thermodynamic behavior of the superalloy Airsist 215 (PN 3601669-7) containing cobalt. Such superalloys are used in aeronautical construction, in the hot parts of the turbine. They are frequently used for the production of the paddles. The parts in service are subjected to dynamic solicitations and thermal fluctuations over the course of time. They are responsible for modification and degradation of material properties. This can lead to the appearance of cracks and, in the long term, to the rupture of these parts. In this paper, a preliminary physical study is made on the appearance of the cracks, followed by experiments using shocks at ambient temperature and under a heating situation which simulates combustion. It is found that these dynamic loads have a significant impact on the development of the cracks that appear on the segments of the turbine nozzle. The study is devoted to the elastic shock of Hertz-Boussinesq extended to viscoelastic bodies by direct convolution of Riemann-Stielges. The interest resides in the local convolution and the distribution of stresses in the contact zone. The shock excitation method includes a deduced force in the load and disload phases. This force is an impulse which approaches a Dirac function. The sample can be modeled approximately by a system of one degree of freedom for natural frequency, damping and transfer function. The spectral response of the specified shock allows calculation of the damping. Every point of this spectrum gives the response for the linear system of the transfer function. Then, viscoelastic shock parameters are deduced.     

Absorbing photonic crystals for silicon thin-film solar cells: Design,fabrication and experimental investigation

In this paper, we present the integration of an absorbing photonic crystal within a thin-film photovoltaic solar cell. Optical simulations performed on a complete solar cell revealed that patterning the hydrogenated amorphous silicon active layer as a 2D photonic crystal membrane enabled to increase its integrated absorption by 28 % between 300 and 720 nm, comparing to a similar but unpatterned stack. In order to fabricate such promising cells, we developed a high throughput process based on holographic lithography and reactive ion etching. The influences of the parameters taking part in those processes on the obtained patterns are discussed. Optical measurements performed on the resulting “photonized” solar cell structures underline the regularity of the 2D pattern and a significant absorption increase above 550 nm, similarly to what is observed on the simulated absorption spectra. Moreover, our patterned cells are found to be robust with regards to the angle of incidence of the light.     

Inner surface modification of halloysite nanotubes and its influence on morphology and thermal properties of polystyrene/polyamide‐11 blends

The asymmetry of halloysite surface chemistry was used to perform a selective modification of its inner surface via grafting of a synthesized styrene/(methacryloyloxy)methyl phosphonic acid copolymer. Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA) and pyrolysis gas chromatography/mass spectrometry were used to evidence and quantify the grafting. Then, raw and hybrid nanoparticles were incorporated in polystyrene (PS)/polyamide‐11 (PA11) blends (80/20 and 60/40 wt%). Scanning electron micrographs showed differences in localization of the halloysite nanotubes (HNTs), since raw halloysite is concentrated in the PA11 phase while modified halloysite is also located at the PS/PA11 interface, leading to a better interfacial adhesion between PS and PA11. An inhibiting effect of modified halloysite on PA11 coalescence was evidenced by measuring the particle size distribution of the extracted nodules. Moreover, the presence of modified halloysite at the interface shows an improvement in terms of thermal stability as observed by TGA, but with no significant effects on PA11 crystallization behaviour as shown by differential scanning calorimetry results. Rheological measurements were carried out to study the influence of the surface modification of halloysite on the blend morphology. A gel‐like behaviour was observed for the (60/40 wt%) HNTs reinforced composition that was enhanced in the case of 10% functionalized halloysite. © 2016 Society of Chemical Industry