In this paper, a simple one-pot thermal decomposition method was successfully used to synthesize a novel Cs3PW12O40/WO3 composite for the first time. The synthesized composite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FTIR, diffuse reflectance spectroscopy (DRS) and N2 adsorption-desorption techniques. The photocatalytic activity to degrade RhB molecules over Cs3PW12O40/WO3 composite was evaluated under xenon light irradiation. The results indicated the complete degradation of RhB molecules over Cs3PW12O40/WO3 composite after 30?min irradiation. However, the photocatalytic degradation of RhB over WO3 and Cs3PW12O40 after 80?min light irradiation are nearly 52%, and 68%, respectively. The enhanced photocatalytic activity of Cs3PW12O40/WO3 composite compared with WO3, and Cs3PW12O40 was ascribed to the strong interaction between WO3 and Cs3PW12O40, which effectively reduces the recombination of photogenerated electron-hole pairs. Based on experimental results, the possible mechanism of photocatalytic reactions on the Cs3PW12O40/WO3 composite photocatalyst was investigated, and the hydroxyl radical (OH) and superoxide radical (O2?) were determined as the main active species in the photocatalytic degradation of RhB over Cs3PW12O40/WO3 composite. 相似文献
Sand production is one of the major problems in sandstone reservoirs. Different mechanical and chemical methods have been proposed to control sand production. In this paper, we propose a chemical method based on using polyacrylamide/chromium triacetate hydrogel to investigate sand production in a synthetic sandpack system. To this end, a series of bulk experiments including the bottle test and rheological analysis along with compression tests were conducted. Experimental results indicated that the compressive strength of the sandpack was increased as much as 30 times by injecting 0.5 pore volume of hydrogel. Also, it was found that the increases in cross-linker and polymer concentrations exhibited a positive impact on the compressive strength of the sandpack, mostly by cross-linker concentration(48 psi). Hydrogel with a higher value of cross-linker could retain its viscoelastic properties against the strain which was a maximum of 122% for 0.5 weight ratio of cross-linker/polymer. The presence of salts, in particular divalent cations, has a detrimental effect on the hydrogel stability. The maximum strain value applied on hydrogel in the presence of CaCl_2 was only about 201% as compared to 1010% in the presence of distilled water. Finally, thermogravimetric analysis and its derivative showed that the hydrogel could retain its structure up to 300 °C. The results of this study revealed the potential application of the hydrogel to control sand production. 相似文献
In this paper Co3O4 doped nanoclinoptilolite was synthesized and characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX) techniques. The adsorption efficiency for removing of methylene blue was about 95% in 10 min. The effect of some factors such as adsorbent dose, concentration of analyte and pH was investigated for enhancing the removing efficiency. Moreover Freundlich and Langmuir patterns were plotted for this new nanocomposite. Maximum of adsorption capacity was obtained from slope of Langmuir and was about 25 mg/g. The kinetic study for methylene blue shows a second order kinetic with rate constant about 0.02 g/mg/min. The prepared nanocomposite was successfully applied for removing some color compounds such as methylene blue, methyl green, and methyl red and also binary dye mixtures. 相似文献
Full-conjugated rod-rod structures comprising patched-fibrillar, ringed-fibrillar, and double-fibrillar configurations were designed from poly(3-hexylthiophene) (homo-P3HT) and polyaniline (PANI) nanorods in chloroform, p-xylene, and amyl acetate dilute solutions, respectively. Solvent quality, seeding effect, and constituent material were focused while characterizing the developed structures. By exacerbating the processing solvent quality from chloroform to p-xylene, a ringed-fibrillar configuration was detected instead of patched-fibrillar structure. In a poor solvent, double-fibrillar structures were acquired from homo-P3HT chains and PANI nanorods. Towards a poorer solvent, P3HT chains were capable of developing their own crystals by less sensing presence of PANI nanorods as seeds. In another experiment, by copolymerization of both P3HT and PANI with crystallizable PEG blocks, sandwiched rod-rod mixed-brush single crystals were developed. Molecular weight of neither P3HT nor PANI was effective on surface patterning of P3HT/PANI mixed-brushes. Via elevating crystallization temperature, PANI dispersed patterns became more delicate and their width decreased from 80 to 160 nm to 12–30 nm. P3HT backbones were tethered with a extended flat-on orientation onto the PEG substrate at either low or high crystallization temperatures. Beside sandwiched single crystals seeded with homo-PEG tiny crystals, slightly and highly curved half-ring crystals were also developed in the PEG-b-P3HT systems.
In this theoretical study, the band structure of MoS2 monolayer was initially numerically calculated using an 11-band tight-binding Hamiltonian model. Then, the contributions of d and p orbitals on the density of states (DOS), electronic heat capacity (EHC), and Pauli magnetic susceptibility (PMS) of the system were investigated based on the mentioned model and the Green’s function method. Also, the temperature dependence of the EHC and PMS is compared for the d and the p orbitals. An obvious gap was observed in the band structure and DOS of the MoS2 monolayer system, which is in good agreement with previous works. Moreover, due to the orbital overlap, Van Hove singularities appear. Then, as a result of this, a crossover occurs in the curves of PMS, which are divided into a low- and high-temperature region. Further, a Schottky anomaly is observed in the EHC curves. Overall, in this paper, we have introduced a method to investigate the electronic properties of $${{ {MoS}}}_{2}$$ monolayer that can be applied to other monolayer dichalcogenides. 相似文献
The upper bound capacity based on the SINR model is a very important parameter when evaluating the performance of the multi-hop wireless ad hoc networks. In this paper, a new upper bound capacity algorithm is proposed. Firstly, we analyzed the classical physics SINR model over the Rayleigh fading channels to establish the relationship between density of nodes and path outage probability. Then, we developed the closed-form expression of the upper bound transmission capacity based on the Weber model for the random networks. Finally, we evaluated effects of parameters in the communication range, density, SINR threshold and fading factors, and consequently transmission capacity of the network by sensitivity analysis. The numerical simulation showed that the optimum density of nodes was existed to obtain the upper bound transmission capacity. The capacity increased firstly and then decreased over the density of nodes increasing. It affected by channel fading factor and communication range sensitively.
An important question to be addressed regarding system control on a time interval [0, T] is whether some particular target state in the configuration space is reachable from a given initial state. When the target of interest refers only to a portion of the spatial domain, we speak about regional analysis. Cellular automata approach have been recently promoted for the study of control problems on spatially extended systems for which the classical approaches cannot be used. An interesting problem concerns the situation where the subregion of interest is not interior to the domain but a portion of its boundary . In this paper we address the problem of regional controllability of cellular automata via boundary actions, i.e., we investigate the characteristics of a cellular automaton so that it can be controlled inside a given region only acting on the value of sites at its boundaries. 相似文献