Maternal Regulation of Infant Reactivity From 2 to 6 Months.

Previous research has investigated the effect of maternal soothing behaviors on reducing infant reactivity but not the differential effects of specific maternal behaviors on infant stress responses. The present study investigated maternal regulation of 2- and 6-month-olds' responses to an inoculation and found a significant decline with age in both the intensity and duration of infants' crying. Maternal affection and touching decreased from 2 to 6 months, whereas maternal vocalizing and distraction behaviors increased. At both ages, the combination of maternal holding/rocking and vocalizing was associated with decreases in all levels of infant reactivity. Neither strategy alone, however, was found to be effective. Feeding/ pacifying behaviors were effective only when initial distress was at a low or moderate level, which suggests that the effectiveness of maternal regulatory behaviors may depend on the intensity of infants' crying. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Object-Oriented Optimization Approach Using Genetic Algorithms for Lattice Towers

A new approach is presented for the optimization of steel lattice towers by combining genetic algorithms and an object-oriented approach. The purpose of this approach is to eliminate the difficulties in the handling of large size problems such as lattice towers. Improved search and rapid convergence are obtained by considering the lattice tower as a set of small objects and combining these objects into a system. This is possible with serial cantilever structures such as lattice towers. A tower consists of panel objects, which can be classified as separate objects, as they possess an independent property as well as inherent properties. This can considerably reduce the design space of the problem and enhance the result. An optimization approach for the steel lattice tower problem using objects and genetic algorithms is presented here. The paper also describes the algorithm with practical design considerations used for this approach. To demonstrate the approach, a typical tower configuration with practical constraints has been considered for discrete optimization with the new approach and compared with the results of a normal approach in which the full tower is considered.     

Controlled microtribology of a metal oxide surface

The rational control of the friction and wear (damage) of engineering, as opposed to model, surfaces under practical conditions such as high contact pressures has long been a technological challenge with much fundamental interest. Lubricant fluids and physisorbed surfactant monolayers (boundary lubricants) are effective friction modifiers but often fail at high loads. We show that the chemisorption of a suitably designed single-chained phosphonate surfactant onto crystalline α-alumina surfaces produces robust protective monolayers that significantly reduce the friction forces and wear even at high loads. The mechanisms are explained, which point to some general principles that offer a basis for scale-up in many different engineering systems. This revised version was published online in June 2006 with corrections to the Cover Date.     

Experimental renewal in human participants.

Two experiments with human participants are presented that differentiate renewal from other behavioral effects that can produce a response after extinction. Participants played a video game and learned to suppress their behavior when sensor stimuli predicted an attack. Contexts (A, B, & C) were provided by fictitious galaxies where the game play took place. In Experiment 1, participants who received conditioning in A, extinction in B, and testing in A showed some context specificity of conditioning during extinction and a recovery of suppression on test. Experiment 2 demonstrated recovery of extinguished responding when participants were conditioned in A, extinguished in B, and tested in C, a third, neutral context. The experiment also demonstrated that the context of extinction did not control performance by becoming inhibitory. Results are discussed in terms of mechanisms that can produce a response recovery after extinction. The experiments demonstrated a renewal effect: a response recovery that was not attributable to the contexts acting as simple conditioned stimuli and is the first work with human participants to conclusively do so. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Investigation on microstructure and tensile behaviour of stir cast LM13 aluminium alloy reinforced with copper coated short steel fibers using response surface methodology

Copper coated steel fibers reinforced LM13 aluminium alloy composites have been prepared using stir casting process. Experiments have been designed using response surface methodology by varying wt% of reinforcement (0–10), stirrer speed (350–800 rpm) and pouring temperature (700–800 °C). Microstructure, tensile strength and fracture surface of composites have been investigated. Analysis of variance, significance test and confirmation tests have been performed and regressions models have been developed to predict the tensile strength of composites. Response surface plots reveal that tensile strength of composites increases with increasing wt% of copper coated steel fibers reinforcement up to 6 wt%. Further increase in wt% of steel fibers decreases the tensile strength of composites. However tensile strength of composites increases with increasing stirrer speed due to the uniform and homogeneous dispersion of steel fibers in matrix. Optimum stir cast process parameters for obtaining higher tensile strength are found to be 5.9 wt% of reinforcement, 753 °C pouring temperature and stirrer speed of 633 rpm. Fracture mechanism is dominated by steel fiber pullouts in composites with higher wt% of reinforcement and dimples are observed in the surface of composites containing lower levels of wt% of reinforcement.     

Automated Hybridization of X-ray Absorber Elements A Path to Large Format Microcalorimeter Arrays

We have developed an automated die-scale process for the attachment of X-ray absorbers onto microcalorimeters. Here, we describe the process for the production of absorber tiles on a handle wafer, their attachment to the microcalorimeter, and the removal of the supporting handle wafer. The process is shown to be a robust path to large format arrays of microcalorimeters.      

Raman spectroscopy and X-ray diffraction studies of stress effects in PbTiO3 thin films

A systematic study of domain structure and residual stress evolution with film thickness and of phase transition in c/a epitaxial PbTiO(3)/LaAlO(3) films using X-ray diffraction and Raman spectroscopy is reported. Both techniques revealed that the films are under tensile residual stress in the film plane and that a-domains are more stressed than c-domains. The two components of the large A(1)(TO) Ramanmodes are associated with a- and c-domains and their intensity ratio correlates to the volume fraction of a-domains. The evolution of the Raman signature with temperature revealed that the spectrum of a-domains disappears around 480 degrees C, whereas c-domains present an anomaly in their spectrum at 500 degrees C but maintain a well-defined Raman signature up to 600 degrees C.     

MicroRNA Expression in Clear Cell Renal Cell Carcinoma Cell Lines and Tumor Biopsies: Potential Therapeutic Targets

This study was carried out to quantitate the expression levels of microRNA-17, -19a, -34a, -155, and -210 (miRs) expressed in nine clear cell renal cell carcinoma (ccRCC) and one chromophobe renal cell carcinoma cell line with and without sarcomatoid differentiation, and in six primary kidney tumors with matching normal kidney tissues. The data in the five non-sarcomatoid ccRCC cell lines—RC2, CAKI-1, 786-0, RCC4, and RCC4/VHL—and in the four ccRCC with sarcomatoid differentiation—RCJ41T1, RCJ41T2, RCJ41M, and UOK-127—indicated that miR-17 and -19a were expressed at lower levels relative to miR-34a, -155, and -210. Compared with RPTEC normal epithelial cells, miR-34a, miR-155, and miR-210 were expressed at higher levels, independent of the sarcomatoid differentiation status and hypoxia-inducible factors 1α and 2α (HIFs) isoform expression. In the one chromophobe renal cell carcinoma cell line, namely, UOK-276 with sarcomatoid differentiation, and expressing tumor suppressor gene TP53, miR-34a, which is a tumor suppressor gene, was expressed at higher levels than miR-210, -155, -17, and -19a. The pilot results generated in six tumor biopsies with matching normal kidney tissues indicated that while the expression of miR-17 and -19a were similar to the normal tissue expression profile, miR-210, -155, -and 34a were expressed at a higher level. To confirm that differences in the expression levels of the five miRs in the six tumor biopsies were statistically significant, the acquisition of a larger sample size is required. Data previously generated in ccRCC cell lines demonstrating that miR-210, miR-155, and HIFs are druggable targets using a defined dose and schedule of selenium-containing molecules support the concept that simultaneous and concurrent downregulation of miR-210, miR-155, and HIFs, which regulate target genes associated with increased tumor angiogenesis and drug resistance, may offer the potential for the development of a novel mechanism-based strategy for the treatment of patients with advanced ccRCC.     

Early Osteogenic Marker Expression in hMSCs Cultured onto Acid Etching-Derived Micro- and Nanotopography 3D-Printed Titanium Surfaces

Polyetheretherketone (PEEK) titanium composite (PTC) is a novel interbody fusion device that combines a PEEK core with titanium alloy (Ti6Al4V) endplates. The present study aimed to investigate the in vitro biological reactivity of human bone-marrow-derived mesenchymal stem cells (hBM-MSCs) to micro- and nanotopographies produced by an acid-etching process on the surface of 3D-printed PTC endplates. Optical profilometer and scanning electron microscopy were used to assess the surface roughness and identify the nano-features of etched or unetched PTC endplates, respectively. The viability, morphology and the expression of specific osteogenic markers were examined after 7 days of culture in the seeded cells. Haralick texture analysis was carried out on the unseeded endplates to correlate surface texture features to the biological data. The acid-etching process modified the surface roughness of the 3D-printed PTC endplates, creating micro- and nano-scale structures that significantly contributed to sustaining the viability of hBM-MSCs and triggering the expression of early osteogenic markers, such as alkaline phosphatase activity and bone-ECM protein production. Finally, the topography of 3D-printed PTC endplates influenced Haralick’s features, which in turn correlated with the expression of two osteogenic markers, osteopontin and osteocalcin. Overall, these data demonstrate that the acid-etching process of PTC endplates created a favourable environment for osteogenic differentiation of hBM-MSCs and may potentially have clinical benefit.