Modulation of Tubular pH by Acetazolamide in a Ca2+ Transport Deficient Mice Facilitates Calcium Nephrolithiasis

Proximal tubular (PT) acidosis, which alkalinizes the urinary filtrate, together with Ca²⁺ supersaturation in PT can induce luminal calcium phosphate (CaP) crystal formation. While such CaP crystals are known to act as a nidus for CaP/calcium oxalate (CaOx) mixed stone formation, the regulation of PT luminal Ca²⁺ concentration ([Ca²⁺]) under elevated pH and/or high [Ca²⁺] conditions are unknown. Since we found that transient receptor potential canonical 3 (TRPC3) knockout (KO; -/-) mice could produce mild hypercalciuria with CaP urine crystals, we alkalinized the tubular pH in TRPC3-/- mice by oral acetazolamide (0.08%) to develop mixed urinary crystals akin to clinical signs of calcium nephrolithiasis (CaNL). Our ratiometric (λ340/380) intracellular [Ca²⁺] measurements reveal that such alkalization not only upsurges Ca²⁺ influx into PT cells, but the mode of Ca²⁺ entry switches from receptor-operated to store-operated pathway. Electrophysiological experiments show enhanced bicarbonate related current activity in treated PT cells which may determine the stone-forming phenotypes (CaP or CaP/CaOx). Moreover, such alkalization promotes reactive oxygen species generation, and upregulation of calcification, inflammation, fibrosis, and apoptosis in PT cells, which were exacerbated in absence of TRPC3. Altogether, the pH-induced alteration of the Ca²⁺ signaling signature in PT cells from TRPC3 ablated mice exacerbated the pathophysiology of mixed urinary stone formation, which may aid in uncovering the downstream mechanism of CaNL.     

Triple Metal Surrounding Gate Junctionless Tunnel FET Based 6T SRAM Design for Low Leakage Memory System

Silicon - The promising capability of Triple Material Surrounding Gate Junctionless Tunnel FET (TMSG – JL – TFET) based 6 T SRAM structure is demonstrated by employing...     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

Process Technology for the Production of Micronutrient Rich Red Palm Olein

Crude palm oil (CPO) is the richest natural source of carotenes that are destroyed in the conventional processing. There is a growing demand for nutritional products containing bioactive constituents externally fortified or preserved through modified process. A commercially viable process for the production of red palm olein (RPOn) rich in carotenes, tocols and sterols has been developed at pilot scale. The process developed involved neutralization of CPO followed by crystallization at controlled rate of cooling and deodorization of the resultant neutralized and winterized palm olein (WPOn) under controlled conditions of temperature and high vacuum. Analytical data related to micronutrients at each process step was monitored. The RPOn thus produced had not more than 0.25% of free fatty acids (FFA) and it retained more than 80% of the carotenes, about 85% of tocols and 65% of sterols originally present in the CPO. The physico-chemical characteristics of RPOn revealed that it is nutritionally of superior quality compared to that of the commercial refined bleached deodorized (RBD) palm olein currently available in the market. The carotenes, tocols and sterols profile of RPOn by HPLC showed that they were retained in their natural forms.     

Enterotoxigenic <Emphasis Type="Italic">Escherichia coli</Emphasis> strains bind bovine milk gangliosides in a ceramide-dependent process

Diarrhea caused by enterotoxigenic Escherichia coli (ETEC) is the main infectious disease of newborn calves. The first step of infection involves bacterial attachment to the intestinal mucosa. This adhesion is mediated by fimbriae that recognize some glycoconjugates on the host cell surface, in particular, several gangliosides. Because milk also contains gangliosides, these have been suggested to serve as ligands for bacterial fimbriae and thus prevent the bacterial attachment to mucosa. The most relevant ETEC strains in calves, including those with K99 and F41 fimbriae, were assayed to determine whether they are able to bind gangliosides isolated from several stages of bovine lactation. Both GM3 and GD3, the main gangliosides of milk, were recognized by ETEC strains, although the different fimbriae showed diverse levels of affinity. Unexpectedly, the adhesion to colostral gangliosides was considerably weaker than that to gangliosides from the other stages of lactation. Because the carbohydrate moiety did not change and because differences in the percentages of unsaturated FA and sphingosine between colostrum and other stages were observed, we conclude that the differences in adhesion could be due to a different composition of the ganglioside caramide.     

New N,O-containing ligands for the biomimetic copper-catalyzed polymerization of 2,6-dimethylphenol

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE), which is widely used in high-performance engineering plastics, is obtained by the copper-catalyzed oxidative coupling of 2,6-dimethylphenol. The oxidative polymerizations have been carried out in acetonitrile with structurally related [copper-(N,O-containing ligand)] complexes as the catalyst precursor compounds, which appeared to be of great interest for a better understanding of the factors influencing the catalytic activities. Steric effects (influence of a methyl group close to the metal center; ligands 4–7) or electronic effects (imino versus amino group; ligands 4, 5, 8 and 6, 7, 9, respectively) on the polymerization rates have been demonstrated. The use of mono- or dinucleating ligands has strengthened the proposed mechanism of the reaction involving dinuclear active species.     

Dyeable polypropylene fibers via nanotechnology

Polypropylene (PP) nanocomposites with three different clay loadings were prepared by solution mixing technique. The solution‐mixed nanocomposites were extruded to fibers using a single screw extruder. The PP nanocomposite fibers obtained were uniformly dyed with three distinct disperse dyes at different levels of shade. The enhanced dyeability of PP nanocomposite fibers was characterized by spectrophotometric measurements. Satisfactory wash, light and crock fastness results were also achieved. Mechanical properties and degree of crystallinity of nanocomposite fibers with different clay loadings were also investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Application of a fibre-reactive chitosan derivative to cotton fabric as a zero-salt dyeing auxiliary

Cotton fabric has been treated with a fibre-reactive chitosan derivative containing quaternary ammonium groups, O -acrylamidomethyl- N -[(2-hydroxy-3-trimethylammonium)propyl]chitosan chloride (NMA-HTCC). Cotton treated with NMA-HTCC has been dyed with direct and reactive dyes without the addition of salt. The colour yield was higher than that on untreated cotton, despite the addition of a large amount salt in the latter case. After dyeing, cotton treated with NMA-HTCC gave better wash fastness than the untreated cotton. The light fastness was however inferior to that on untreated cotton. The antimicrobial activity of cotton treated with NMA-HTCC against Staphylococcus aureus was considerably lower after dyeing, probably due to the antimicrobial effect of the cationic group on NMA-HTCC being blocked by its combination with the anionic dye.     

High styrene–rubber ionomers,an alternative to thermoplastic elastomers

High styrene rubber ionomers were prepared by sulfonating styrene–butadiene rubber of high styrene content (high styrene rubber) in 1,2‐dichloroethane using acetyl sulfate reagent, followed by neutralization of the precursor acids using methanolic zinc acetate. The ionomers were characterized using X‐ray fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), dynamic mechanical analysis (DMA), and also by the evaluation of mechanical properties. The FTIR studies of the ionomer reveal that the sulfonate groups are attached to the benzene ring. The NMR spectra give credence to this observation. Results of DMA show an ionic transition (T_i) in addition to glass–rubber transition (T_g). Incorporation of ionic groups results in improved mechanical properties as well as retention of properties after three cycles of processing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2294–2300, 2002     

Zero-<Emphasis Type="Italic">trans</Emphasis> shortening using palm stearin and rice bran oil

Several pilot-scale trials reported in this paper, using palm stearin-rice bran oil (PS-RBO) blends, obviously did not contain trans FA (TFA), whereas the commercial products were found to contain 18–27% TFA. The effects of processing conditions such as rate of agitation, crystallization temperature, and composition of the blends on the crystal structure of shortenings were studied. The products were evaluated for their physicochemical characteristics using DSC, X-ray diffraction (XRD), HPLC, and FTIR techniques. The formulation containing 50% PS and 50% RBO showed melting and cooling characteristics similar to those of hydrogenated commercial “vanaspati” samples. Analysis of the FA composition revealed that the formulated shortenings contained 15–19% C_18∶2 PUFA. Tocopherol and tocotrienol contents of the experimental shortenings were in the range of 850–1000 ppm with oryzanol content up to 0.6%. XRD studies demonstrated that the crystal form in the shortenings was predominantly the most stable β′ form, and there was less of the undesirable β form.